How to update to MPC 2.10 and get the new synths to work in this video here: kzitem.info/news/bejne/pqJvxYilcICkmo4
@erroldawkins1392
3 жыл бұрын
Many thanks Matthew, I really appreciate the time and effort you put in to make that video, how to get the new synth. Blessings my brother.
@nakazul1
2 жыл бұрын
Got a question. Before this patch you could use the MPC Live as a audio interface while recording on my PC. Can you leave the external audio interface in the MPC, connect it to a PC and keep recording, on the external audio device, through the MPC to the PC? I only have one external audio interface.
@williamrichardson7480
2 жыл бұрын
Is there a way to use outide effects pedals with this setup?
@moilario
Жыл бұрын
can you pleas do a video on all audio interface that are compatible with Mpc beats software the free version and the full version
@powermix24
3 жыл бұрын
MPC one becomes the ALL IN ONE machine! This is huge!
@Carbonvidz1111
3 жыл бұрын
My favorite part of the update that nobody is talking about: my sd card shows up in Windows without having to take it out of my MPC One. Drag and drop samples just got easier
@Dominant1mw
3 жыл бұрын
Now that's cool 😎
@ElizkBeatz
3 жыл бұрын
Lmaoooooo Mac users been had that🤣
@songwriterdc1899
3 жыл бұрын
@@ElizkBeatz we will make sure to send you a trophy
@Parialated
3 жыл бұрын
It did prior to the update in Windows too if I connected the mpc live 2, to the computer, it just didnt show the internal drive of the mpc, but it did show the usbstick/sdcard.
@jamespilkington
3 жыл бұрын
@Koraamis keep the sd card in and turn it on to controller mode
@jayrueff5852
2 жыл бұрын
This totally helped me figure out my recording for the new 2.11 update. Thank you Matthew!! You’ve been such a godsend for this learning curve. Making easier for guitar players to make music!
@jeffmartin1433
6 ай бұрын
Dude. Thank you so much for making this video. You just stopped me from returning this mpc because I couldn’t figure out how to use it with my interface. I watched several videos and you are the only one that got it right the way I needed it. You rule.
@khari3133
3 жыл бұрын
A lot of people gonna for sure buy the one now with this feature allowing multiple inputs
@christopherhammell9904
3 жыл бұрын
Yes, I’m going DAW-less and MPC One only again.
@JamesBermingham
3 жыл бұрын
0:56 This is a gamechanger for Zoom L-12 and MPC owners for sure. Super video!! 👏👏👏👍👏
@DjSmithsonian
3 жыл бұрын
THANK YOU. Had no idea I needed to change the audio settings. I been sitting here cursing for an hour before watching this.
@Madmohawkfilms
3 жыл бұрын
Installing NOW! Guess I might want to add a Zoom L-20 or Tascam Model 24 now as an Audio Interface and Recorder thanks to USB Class Compliance! Thanks Matt!
@MatthewStratton
3 жыл бұрын
Have fun!
@rossbcriss
2 жыл бұрын
You are always helpful when I get in a bind…even though my audio interface didn’t work, this video helped me get my irig working aswell as gave me more creative ideas. Thanks for your work and time Matt!
@Abos_Studio
Жыл бұрын
I recently got the SP 404 & couldn’t get condenser mic to work on it properly…so instead of buying a mic…got the mpc one. Glad to see how easy it is to integrate everything. Problem solved! Thanks for the video and great guitar playing btw.
@mindalteringfx316
3 жыл бұрын
Wanted this for so long🔥🔥🔥
@MatthewStratton
3 жыл бұрын
Good stuff for sure! 🔥🔥🔥
@mpcbeatzpro1099
3 жыл бұрын
@@MatthewStratton my interface comes on but no sound matthew
@mpcbeatzpro1099
3 жыл бұрын
@@MatthewStratton i think i need another cable for input and outputs for sound out my speaker
@mpcbeatzpro1099
3 жыл бұрын
@@MatthewStratton i got it working👌🏽
@MatthewStratton
3 жыл бұрын
Nice.
@iveno_
2 жыл бұрын
Great video again, thank you for covering this up because I want to life stream!
@baqcasanke
Жыл бұрын
This feature is basically what sold me. I have the zoom l-8 and i used to have a full desk of dawless gear and it was a hodgepodge and a mess at times. Now i can use the interface i have and get rid of 3/5’s of my whole setup with the mpc live 2
@unworthyServant08
3 жыл бұрын
This is a really dope feature! I could now see myself using it as a recorder for when I play with other musicians. I can also now use a USB mixer like the Tascam model 12 for mixing purposes. However, it doesn't change the total number of audio tracks I can have in a project on the MPC Live: 8. Still, a step in the right direction, Akai!
@Me-Lo
3 жыл бұрын
Hello! Would you mind if i ask you a couple of questions? I'm currently waiting for delivery of my live 2 and I'm considering getting a Tascam model 12 as well! Could you let me know how well does it work over usb, are you able to assign channels as inputs? Can it output the master from mpc and add effects to it at the same time while you're using it as an input? How does it work? I'd appreciate any info/feedback. Cheers!
@unworthyServant08
3 жыл бұрын
@@Me-Lo the answer to all your questions is YES! You certainly can assign channels as inputs, as long as you change the mode on the 12 to PC. Also, the Master outs on the MPC can be routed to the 12, which has its own array of effects that can be applied while recording, and you can even reroute that same audio back into the MPC post-effects. However, the 12 itself can be used as a recorder as well. One way you could use the MPC-12 combo would be to compose your piece in the MPC, record each track to the 12, and then mix in the 12. Or you could record a band via the 12 into the MPC. There’s multiple ways you could use such a combo to achieve your musical goals!
@ervinbatten1346
3 жыл бұрын
Hey matt thanks for all your content. I watched one of your videos on connected to splice with your mpc one and it helped a lot I watched a lot of your videos and the content is allways good. Thanks for every thing.
@MatthewStratton
3 жыл бұрын
Awesome! Glad you enjoying the videos!
@davidhrivnak
Жыл бұрын
Your videos are always so thoughtful and thorough! Thank you so much for taking the time to make such helpful content.
@alxbonnand
2 жыл бұрын
Hi, I was just wondering, when you use an external audio device such a Scarlet, are the inputs of the MPC switched off or are they still usable?
@smokeynewport1591
3 жыл бұрын
Great video! All the MPC knowledge you share is very much appreciated. I've been hoping for this update so I can use condenser mics with phantom power directly into the MPC One!
@sesm5511
3 жыл бұрын
Once again excellent video. So glad we got this update.
@lindasson
3 жыл бұрын
Great video Matt, and a great season to be a DAW Less beat maker/producer. Keep doing your thing bro, God bless!🙏🏾✊🏾
@MatthewStratton
3 жыл бұрын
Appreciate it!!
@ropewalkingelephant
3 жыл бұрын
don’t forget you can assign multiple audio tracks to different inputs and arm them all and multitrack record
@ropewalkingelephant
3 жыл бұрын
@Koraamis you can also go into system settings and check an option to always arm multiple tracks
@matteomelies
2 жыл бұрын
Are the onboard inputs (on the rear) and the audio interface connected by usb simultaneously useaeble on different tracks?
@gagealbright
2 жыл бұрын
are you sure the mpc one can record multiple tracks at once? i did not know that was possible
@ropewalkingelephant
2 жыл бұрын
@@gagealbright absolutely
@gagealbright
2 жыл бұрын
@@ropewalkingelephant wow that is awesome. thanks for the reply!
@QUDASCIENTISTTV
3 жыл бұрын
Just sold my MPC One and now I feel foolish. Never got a real chance to deal with the audio side of. And now THIS with the interface? That’s it! I’m about to buy another. 👍🏽 Thanks.
@erroldawkins1392
3 жыл бұрын
Hi Matthew here’s the coment about the video scarlet interface. Thanks for the question. All Scarlett interfaces are class compliant - can be connected to a Mac without installing additional drivers. I have both the 4i4 and 8i6 and although both are very good, I would recommend the 8i6 as it has its own power supply which can help out if you ever run into rfi or emi issues with your setup. Also, the additional IO vs a 2i2/2i4 is nice to have for for your MPC and other future devices that may become part of your workflow. Hope this helps out and thanks for watching
@1FlexibleMind
Жыл бұрын
Hey Matt thanks again man that’s very helpful. I appreciate your video , you helped out a true newbie to making beats and creating my own work. Thank you Sir!!!!✊🏾
@michaelberger1276
Жыл бұрын
That's great, I didn't know, such a great enrichment
@mickcj2001
3 жыл бұрын
I will be hooking up my Roland MX1s to it amazing update! Cheers Matthew great video!
@SimonJones
3 жыл бұрын
How did you get on with this? I had the same idea but can't get it working. MPC forced setting the MX1 sample rate to 44100 - after this, the sample rate message on the mpc has gone but after 10-15sec MPC errors and resets back to internal. Tried all three MX1 start-up modes, but keeps erroring. MX1 is on latest firmware 1.05.
@mickcj2001
3 жыл бұрын
@@SimonJones I decided not to rewire my setup too much. I have 3 MX1s connected to each other & run the send out to the MPC & all my instruments are connected by midi & controlled by a Novation SLMK3 keyboard sequencer. I have not tried yet to connect a MX1 to the MPC via usb, however after reading your problem I will give it a go & see what happens.
@SimonJones
3 жыл бұрын
@@mickcj2001 Done a little more reading and the issue seems to be that the MX isn't "class compliant" which is a requirement for the MPC audio interface feature.
@mickcj2001
3 жыл бұрын
@@SimonJones I am not even going to try it, I am more than happy with the way I already have them set up & I think going via the usb would be less efficient for my workflow. I can choose any channel from my MX1 to send to the MPC aswell as my Roland MC707 & the Roland SP404a as I first send to a switcher box that lets me choose.
@mauriceshirley2419
3 жыл бұрын
Awesome, Mathew. Thanks for the tutorial. It’s excellent!
@MatthewStratton
3 жыл бұрын
👍
@blaster3744
7 ай бұрын
Thx matthew. Crystal clear as always. ❤
@FortressofSound
3 жыл бұрын
I'm getting clicks and pops with the Scarlett 4i4 3rd gen. So it's not really usable for me.
@andrewgobel4936
2 жыл бұрын
Bummer!! I was thinking about getting the 3rd Gen 8i8 which has its own power supply, but it would probably be the same story
@Ink0ne415
3 жыл бұрын
This is so dope thanks for breaking it down Mat.
@MatthewStratton
3 жыл бұрын
You bet!
@AmelAmaruRestrepoCasas
3 жыл бұрын
Great content as always Matthew, you're my go to guy.
@joshuamunozzz
Жыл бұрын
Exactlyyy what I was looking for man!!! Thanks a lot!!!
@MatthewStratton
Жыл бұрын
Glad to hear it!
@ElectronisoundsAudio
3 жыл бұрын
Nice one, Matthew! 😀 👊
@MatthewStratton
3 жыл бұрын
Thanks! 👍 It's a sweet update! Good to hear from you.
@danecustance2734
2 жыл бұрын
Thanks foir making this easy to understand.
@_EightySix
2 жыл бұрын
So does this technically give you extra inputs, as in the inputs on the interface as well as the inputs on tthe MPC?
@THEKINGOCAESAR
3 жыл бұрын
Great video man can’t wait to do this
@thedopaminelifestyle
3 жыл бұрын
Love your vids! They are so easy to follow and so helpful!
@MatthewStratton
3 жыл бұрын
Appreciate it!
@unclemick-synths
3 жыл бұрын
Yay! Audio interfaces! 👍
@MatthewStratton
3 жыл бұрын
Oh yeah!
@trumjohannsmancave
3 жыл бұрын
My timing on this is excellent! I bought the LIVE 2 two weeks ago😆
@poeticgeenetikstv4672
3 жыл бұрын
I have the Scarlette 4I4,not a stable sound without the Focusrite control software.
@andrewgobel4936
2 жыл бұрын
Does your 4i4 connected to MPC One produce crackling audio? What generation Scarlett?
@sinewavedream
2 жыл бұрын
I have the 3rd gen 4i4 and gets dropouts continuously. I tried a friends 2nd gen 6i6 today and it works perfectly. I'm wondering if the issue has something to Do with the 3rd gens usb-c port? Not much conversation on this issue.
@AppAxis
3 жыл бұрын
Now the MPC One will pair nicely with the Apogee HypeMic! #Apogee #MPC #StandaloneStudio #Dawless
@Hesohi
3 жыл бұрын
What about the outputs? I record externally and would love to separate the tracks . I use MPC live so and have a Tascam Model 24. Can you use the outputs from MPC to record into the Zoom?
@cesarsjogren
2 жыл бұрын
hey did you every fin this out? was wondering the same for my Zoom L-20. If not Id exchange it for a tascam 24 to get that functionality
@audiolego
3 жыл бұрын
Mathew, the preamps on the Akai X is good too. I have a steinberg ur22mk2 and since I only have a few synths I'm ok with the inputs of the Akai. I do use UR22 for the midi though.
@BobbyWashingtonvlog
5 ай бұрын
Would I be able to use uad appollo twin audio interfaces with the mpc one? And will it require uad firmware?
@kvmoore1
3 жыл бұрын
I have one quick question. If you hook an external USB interface, such as the Focusrite Scarlett to the MPC One, will the MPC's internal physical input/output options simultaneously be available and selectable along with the Scarlett I/O? For example, I have an MPC X with 8 total outputs including the main outs. If I were to hook up a two-channel Scarlett, could I expand my total outputs to 10 by simultaneously routing the 8 outputs from the MPC X plus the two from the Scarlett to be sent to a mixer or computer interface for tracking out? If so, this is really NICE!!!!-----well, it's NICE anyway non-the-less. Thanks for the video. Excellent feature update!!!!
@matthegan3415
2 жыл бұрын
Did you ever find the answer to this?
@kvmoore1
2 жыл бұрын
@@matthegan3415 I just tested a class compliant USB interface (although it wasn't a Focusrite) to see if it would work as mentioned on my MPC One. I have not tried it out on my MPC X yet. However, I made two startling and not-so-good discoveries after connecting the interface to the MPC One: 1. The MPC requires me to pick what audio device I want to use. I can either use the USB interface or the internal MPC audio I/O but NOT BOTH AT THE SAME TIME!!!!! Based on this, it seems like it works similar to ASIO devices in Windows in which you can only select one audio interface within a DAW application. THAT SUCKS!!!!! 2. When using the USB audio interface (which is a 4-channel interface 4 in/4 out) with the MPC, I can only get output from channels 1 and 2. When I tried to route sound to channels 3 and 4, I got no sound from those channels. THIS ALSO SUCKS!! Based on this test, I'm not liking the USB Audio implementation of the MPCs. Hmmm. Maybe this isn't the best interface to test it with. However, it's the only one I can test right now. Regardless, not being able to use both, the internal and external audio I/O simultaneously is a real bummer. The USB audio interface I used in this test is a M-Audio Connectiv (designed primarily for DJing).
@MidiFister
2 жыл бұрын
@@kvmoore1 i can confirm the built in inputs and outputs on the mpc one (including the headphone jack on the front) dont work when i choose an external audio io (Focusrite 18i6). this does suck. imagine if you could buy a $15 behringer 2x2 audio io (those tiny ones on sweetwater, phone size i guess) and make it a 4x4, that would be dope. but its not worth my time/money especially if its quite possible i end up like your 2nd example where the 3rd and 4th output dont work. not worth the gamble. unless i just happen to find a very cheap 4 or more audio io (like $50 or less) i cant see myself bothering, but i get why people would run some crazy amount of inputs into it. Also the digitakt cannot be used as the audio output for some reason, idk. maybe im not doing it right. but, you can go midi out on digitakt to midi in on mpc and midi sync them so thats kinda nice to save a midi port i suppose.
@kvmoore1
2 жыл бұрын
@@MidiFister Yeah. I'm gonna re-test my USB audio interface again with the MPC One when I get a chance. I want to see if I can figure out how to get audio from outputs 3 and 4. I'm really hoping there was just something I missed or something I did wrong because I don't see why this shouldn't work. Several people have not only confirmed, but also proven via KZitem videos, that multichannel audio outputs work flawlessly on the Tascam Model 12 mixer (which is also USB class compliant) when connected to the MPC One. Since multichannel output is possible on that device, I don't see why it shouldn't be possible on my M-Audio Conectiv. If I can't get it to work on the second try, maybe these class compliant USB interfaces are a hit or miss. But, I'm gonna try it again first before I draw that conclusion.
@kvmoore1
2 жыл бұрын
I have an update to my previous post. I have recently tried my M-Audio Connectiv again with my MPC One and was still unable to get sound from outputs 3 and 4, unfortunately. I guess these so-called class-compliant USB interfaces really are a hit or miss.
@ernestbowers7800
2 жыл бұрын
Hi Matthew you have that connection to the zoom 12 can't you jus use the zoom or the mpc live for recording vocals?
@recordkilla8662
3 жыл бұрын
Keep doing what you doing💯 Thanks for the tutorial.
@MatthewStratton
3 жыл бұрын
Thanks, will do!
@leonardbranch1930
2 жыл бұрын
Hi! Do I need, anything other than, the 2i2, to record vocals, into my MPC Live 2? What cables do I need?
@Proofofart
Жыл бұрын
Brooooooo thank you so much this is a game changer for real!!
@mysosjalapss6488
2 жыл бұрын
So the mpc one register another audio interface because it is also connected via usb. And we have the option in mpc to chose another audio device as audio playback? This is amazing
@molech7640
3 жыл бұрын
Now I get it its like recording in a computer but I Stan alone
@alenloop
2 жыл бұрын
Great video! But where did the Audio Device option go on the 2.9 firmware?? Can't get the MPC One to load my audio inteface :-(
@erwintuijl6342
2 жыл бұрын
The big question is: how's the latency when using an external interface? It can't be zero, that's for sure.
@angelfmusic
3 жыл бұрын
Excited. I have the Tascam model 12, the Mpc x and Roland fantom. Question- so do I need audio out cables from my fantom into my model 12 and then connect the model 12 via usb into my Mpc x and it will read audio? Alittle confused. My goal is audio over usb where I don’t need audio cables into my X from mixer.
@gvlive
2 жыл бұрын
mpc live just will not acknowledge the scarlett 6i6. anyone have a suggestion?
@Pauluz_The_Web_Gnome
2 жыл бұрын
Any same videos for the Akai Force? Firmware 3.1.3?
@jasonspurlock3554
3 жыл бұрын
Just got the MPC ONE and Tascam Model 12 hooked up with USB but the Tascam doesn't show up under audio devices. Switches are all set to USB/PC on the Tascam. Using Chroma USB B to USB C cable. Firmware updated to the latest on both. Tried setting the Tascam to controller mode and went through every controller preset. Every video I've seen looks like you just plug in the cable and the audio interface name automatically shows up under audio devices. Mine will only show "internal". Any idea what the problem might be?
@famvids9627
2 жыл бұрын
Hi Matthew... it recognized my zoom r20 but when I hit play, nothing came out of the monitors... I don't know what the problem is... any idea?
@seekabs
3 жыл бұрын
Another awesome tutorial! Thanks!
@MatthewStratton
3 жыл бұрын
Appreciate you.
@BEASTBEATS700
Жыл бұрын
How u getting the interface to work I have a prosonus 24 and they have nothing in the back of my mpc live 2 to plug my wire from the interface up to o. The mpc live 2
@z.c.cunningham
3 жыл бұрын
Are you able to output sample tracks to the l12r? I have a sample looped and directed the output to the mixer, but I’m not getting any signal. However, when I turn on usb sound return I get a signal.
@donmega9006
2 ай бұрын
Matthew I was wondering could it be used the same way with the mpc if you use the mpc with the mpc software. I have my mpc connect to my lab laptop. I want to connect the interface via USB to the mpc so I have some mic inputs. My main thing is would having the mpc connect to my laptop USB and the interface to the mpc USB cause any problem? I have the mpc live.
@xCorzo650x
2 жыл бұрын
audio device option does not show up for me
@yameldurand5414
7 ай бұрын
Where you have the headphones connected to monitor everything you do inside the mpc without the need for external speakers.
@LigiaKamada
Жыл бұрын
Matthew, thank you so much for the infos you give to us. I don´t know if anyone can help me but when i connect the interface steinberg to the mpc in the preferences I don´t get the "AUDIO DEVIDCE" option. It does not appear in the menu. How can I do it, please? The interface light is on and appears in the MIDI/SYNC but there is no "AUDIO DEVICE" option. I thank so much if anyone could help me.
@marktaylor535
Жыл бұрын
I just got a 18i8 Scarlet and i plugged everything in and got it plugged up. But in the preferences it doesn't show "audio device". So i cant hear anything through the headphones on the interface but I know the mic works cause the phantom power kicks on. And in the menu it says that the interface is hooked up. How can i get this to work?
@JoaoManuelSantos-ud7vv
10 ай бұрын
❤❤❤❤ much tanks my setup started Your videos is amazing
@MatthewStratton
10 ай бұрын
Glad to help
@JoaoManuelSantos-ud7vv
10 ай бұрын
I never instaled the atualizacion.. upgrades.. because i dont under stand downloaders... i dont have the expancions in my mpc... i buy 3 mpc one butt the expancions not in ther because i dont understand may be you make one video instaled expancions butt im happy 4 your videos every day i see the videos. Tchekerauuu 🙏
@GamingAuthorityVideo
3 жыл бұрын
Can u make a video on how to connect mpc live to My mixer that has a usb audio interface ?
@alexmazyck6804
8 ай бұрын
Hey do you use two usb cables? I saw you plug the usb into the scarlet and the mpc so I’m a little confused.
@bdoesmusic
Жыл бұрын
So if you're recording only vocals, do you need the audio wires or just the interface USB connected?
@watch_me_flyaerialimagery1108
3 жыл бұрын
I’m not understanding what two cables you plugged into the two outputs on the rear of the Scarlet. What are the other ends plugged into?
@MatthewStratton
3 жыл бұрын
Studio monitors. I have them going to my Zoom L-12 and I can record the video and monitor from there.
@Buddhanature322
2 жыл бұрын
What do you do if your MPC is not recognizing the interface within the audio device drop down? Thanks
@dulfaMB
2 жыл бұрын
Thanks for the video ! Without guitar, or with it...can you add laptop to all that ?
@hullaballoo777
Жыл бұрын
I'm new to using more cables for monitoring. What kind of cable do you use for monitor/audio output? I'm confused on if I need a ts interconnect or two separate trs cables. I'm trying to run a Volt 276 into my mpc one plus.
@tonymontoyafitness
2 жыл бұрын
what adapter did you use to connect the mpc to the back of the scarlett? i have mpc 1 but doesnt have that adapter . any help would be appreciated
@cyrillepennavaire5623
8 ай бұрын
Hey Matthew, do you know by any chance if the Focusrite scarlet 2i2 and solo gen 1's work with the mpc live 2? Mucho apreciado!
@isaiahrodriguez6977
2 жыл бұрын
I’m having trouble recording in samples via turntable or even my laptop when my mpc is using my audio interface. Any advice?
@LigiaKamada
2 жыл бұрын
Hello if anyone could help me please! when i do plug my interface to the mpc one and go to preferences there is not the AUDIO DEVICE tab. Why ? The Interface appears in the tab midi sync only. thank you so much for your answer.
@anthonytyson1708
2 жыл бұрын
Matthew, I appreciate the vid. I have an issue with recording audio with my Saffire Pro 40 FW-Thunderbolt. I get an error in the MPC 2.10 software saying “no audio will be processed.” Maybe you have some insight. Thanks
@ajalonreyes2459
2 жыл бұрын
Hey Matt I want to record through interface but I still want audio to come out the mpc because I don’t have the right audio jack for my interface .. not sure if possible
@poeticgeenetikstv4672
Жыл бұрын
Say Matt, I have the MPC LIVE, as well as the zoom, L12, ZOOM H8, and the ZOOM Z3, and they wont link up in standalone on my Focusrite 212, not even my Focusrite 414 will link. Can you do a full video on how to track out and use the F12 with standalone.
@highginx
Жыл бұрын
I have my interface connected via USB but when I go to preferences - Audio Device - my Scarlett 2i2 doesn't show up? It only has an option for internal✔️ How can I get my interface to show up?
@LinkVelasquez
3 жыл бұрын
Hey Matt great video, what cables were coming out of the Scarlett and where were they going? The cables u said are usually for studio monitors
@MatthewStratton
3 жыл бұрын
Hosa cables to connect to my Zoom L-12 so I can record the video. These are the exact cables that I ordered: amzn.to/3su6xFV
@jamesonvparker
2 жыл бұрын
I have the Scarlett 2i4 and for some reason the audio is coming out of the headphone out on it but not feeding my monitors. I’m not sure why that’s happening. It was working for a moment but some settings later and now nothing 😒.
@honkytonkblues2323
2 жыл бұрын
Matthew, what power bank do you recommend to power the akai mpc one if I want to connect not only a scarlet (to plug a condenser mic and a electeic guitar) but an akai mini mk3 too? How I can do this?
@CrusaderGeneral
2 ай бұрын
what if you use an audio interface that has only a USBC port thats used for both data and power, like the focusrite solo. a USB hub should work
@homeskillet060290
3 жыл бұрын
After turn on my mpc one and press the setting preference button I don't see the "audio device" option and I don't know what I'm missing here.
@EdwardJacksonproject
10 ай бұрын
Thank you very helpful!
@chrisrickett5035
3 ай бұрын
Thank you so much for an amazing video very informative. I am working on starting my own music and metal Chanel. Nothing like yours. I am putting it all together and I just got the Focusrite 18i8. Any suggestions would be great.
@famvids9627
10 ай бұрын
Are you having any of the clicks or pop sounds by chance or any of the other interface problems?
@wutsupg
5 ай бұрын
Hey Matthew, has anyone on your channel said they got the MPC One or any modern MPC series for that matter to work with the Focusrite Scarlett 18i20? I have seen many videos of the MPC One wokring with 2 and 4 channel units, but I haven't seen any videos posted regarding the Focusritr 18i20 models. Could you hit me back if you've heard anything please?
@johnefrederick1590
3 жыл бұрын
I can’t believe you couldn’t do this before
@MatthewStratton
3 жыл бұрын
It is a good option to have.
@WytseZ
2 жыл бұрын
Help, can I keep using the outputs of my MPC when using the inputs of my audio interface?
@johndean5860
2 жыл бұрын
Can I plug it to the computer via usb just for midi without going into controller mode?
@googlerep366
3 жыл бұрын
Like always thank you for all your help your a great teacher. Question though so do I need to run my line out left and right of my audio interface to input 1 & 2 on my MPC live 2 or does it work via usb now that its audio over usb?
@MatthewStratton
3 жыл бұрын
Audio works over USB.
@chadwickplatt8662
2 жыл бұрын
I have been trying to connect my interface to my Mpc one and when I get to the preferences I’m not getting audio device … so how can I get it to give me the audio device option to move forward
@AlekseiDroganov
3 жыл бұрын
As you saw in video he plugged mixer to mpc. Mixer should be usb class compliant as I knew. How he plugged mixer to mpc just to usb or Audio cables are routed too? I mean line out goes to mpc or..? Thank you 🙏👍👍🔉
@erroldawkins1392
3 жыл бұрын
Hi Matthew, I’m thinking to get a audio interface. Ardent 14 2 , will it work with the MPC new 2.10 update in stand alone , like the video you done with the Scarlett. Or should I purchase the Audio, the one Andy Mac was using in his video, or a Scarlett ? I would appreciate your input. Kind regards Errol.
@MatthewStratton
3 жыл бұрын
I don't have one to test. Akai says Class Compliant devices work. That is why the Scarlett and the Zoom L-12 work because they are Class Compliant and don't require drivers to work on it.
@erroldawkins1392
3 жыл бұрын
@@MatthewStratton Thanks Matthew, I will be getting the scarlet. Thanks for your help Jah blessings
@ElvinJones1981
Жыл бұрын
Where do the audio cables running from Scarlett's Line Output get sent to? Re Time: 1:37
Пікірлер: 448