I don't even want a multitool sheath, but the last one you showed had made me realize that I'm probably looking for an organizer with a clip.
@Gman1024
Ай бұрын
I got a "Gentlestache Multitool Sheath for Belt Multitool Pouch Leather Belt Holder for Multitool EDC Pocket Organizer with Clip for Belt and Flashlight Holster Multitool Color Black" off 4m4zon for around twenty five bucks and have been happy with it. Thanks for showing some options.
@timb4425
Ай бұрын
This is actually very helpful. There are so many manufacturers of sheaths that it is hard to know which is worth grabbing and which is not. THanks Dom
@toddmarrazzo187
Ай бұрын
It was for the similar design. I already cancelled the order. TOK took care of the refund right away. No penalty. The one you suggested I do not even know its on my waist and everything goes in/out with ease and it stays on the belt. Thanks again
@roadrageburleson
Ай бұрын
This comes at a great time. I need a new holder for my MP600 and I don't have TOK money to spend right now and you did all the leg work for me. Thanks. Now I have to make a final decision.
@wickius12
Ай бұрын
Thanks! This is the exact video I was hoping you would make: I’m new to edc and I can’t spend hundreds of dollars just to figure out if a sheath might work. Thanks again!
@toddmarrazzo187
Ай бұрын
Don received Main Street Forge. Love it. Review was 100% on the money. I’m thinking about cancelling TOK order
@maxlvledc
Ай бұрын
if its for the similar design then I would..but if your getting the larger ones...those are truly incredible and will last a lifetime.
@GromMolotok
Ай бұрын
I carry a Leatherman Wingman, a smaller multitool. I've found that horizontal carry works best for me with this, since it's the only thing in the holster. The BSA knife case has the best design of any for this, but it's too long, and the nylon tends to wear out (as nylon does). I'd love something like that in a 4-4.5" length.
@maxlvledc
Ай бұрын
viperade has a horizontal sheath for cheap that would work.
@GromMolotok
Ай бұрын
@@maxlvledc thanks! I'll take a look.
@Philscbx
Ай бұрын
Man, I sure like the option to save entire memo section to file for all the active links provided. My Note20Ultra made it all possible. Cheers
@zakburford9553
Ай бұрын
It would be great to see these worn on your body to get a feel of how 'obvious' they are under your clothing. In Australia people will get spooked and think you're carrying a gun if they see the holster poking out under a t-shirt. Otherwise, very thorough video as always.
@maxlvledc
Ай бұрын
Imo, there are no guarantees, but the first one is the flattest by far.
@toddmarrazzo187
Ай бұрын
Thanks Dom my TOK order ships 8/15. I just ordered the mountain forge because of your review. Thanks hope all is well
@darrentuck3116
Ай бұрын
A multitool, A pocket knife and A flashlight. This is the combination that needs a case made.
@wieg86
Ай бұрын
more ways to spend money!! WOOT WOOT!!!
@TulkOrkan
Ай бұрын
Hello early vistors!
@Spthomas47
Ай бұрын
First timer here. Thanks for the welcome. I'm torn here; I don't like things on my [Bat] belt, but I absolutely love pocket consistency. My needs are few, really- Front Left- L2R Marker Pen Flashlight (Inside) Wallet Microfiber cloth Front right- Phone Knife(out of work) Back right- Primary knife Back left- Trash Occasionally a knife. Cargo pockets be dammed(though I use them for stuff).
@unknownuser730
Ай бұрын
Thank you! I've been looking forward to this video.
@Philscbx
Ай бұрын
What's so Bazaar, I was just about to head to Amazon after searching first for a EDC case for 21700 series flashlight. Where I do have the fabric nylon ones that were probably made for Leatherman multi tool case with flap over cover. But just enough room to add a small AAA pen light in the second slot. Thanks hugely for a cool presentation. Cheers
@TheLoneBrick
Ай бұрын
The clip on the Main Street gorge is slightly hook shaped too, so it will catch on the belt and not slide off unless you want it to. 13:00
@maxlvledc
Ай бұрын
yep yep. and the piece of metal on opposite side as well.
@user-gp5tf4wc5c
Ай бұрын
If you really want perfect fit you either wet form or roll the dice and hope your gear fits. Nothing really works as well as wet forming for custom fit and it’s not difficult or bad for decent quality leather.
@jack.charlesc4750
Ай бұрын
Great review i was on the Hunt for something like this the one with the clip at the end having the possibilité to have it on belt or in the pocket have a great appeal 😂
@apoabeey
Ай бұрын
atm i am trying out double pistol mag holder as my multitool and flashlight sheeth. Until now it works quite well. And it was about 6 bucks on aliexpress
@maxlvledc
Ай бұрын
hmm, interesting.
@MattPasciuto
Ай бұрын
Re: that first 1791 sheath: would that weirdly sized slot accommodate a slim pen + mechanical pencil? Because if so that could be a nice advantage
@maxlvledc
Ай бұрын
100%, probably 3-4 pens in fact.
@Spthomas47
Ай бұрын
I've been thinking about such a thing for me daily. Will I order it or make it myself? I don't carry multitools anymore, but... I F'n Love Pocket consistency.
@kentrumm1385
Ай бұрын
I have the same Main Street Forge sheath. After a short time, my sheath was coming off the belt clip. Had to go look for it several times. I ended up placing a small airhose safety clip through the bottom of the clip. Now it stays in place. Just sucks I had to fix it.
@maxlvledc
Ай бұрын
That sucks
@CanadianBeachcomber
Ай бұрын
When I see a pliers based multi tool and a thing for marking (pen, marker or pencil), the third item that comes to mind is a tape measure. Someone needs to reinvent and improve tape measures so they don’t have a square shaped case and are a better fit for holsters like the type in this video.
@maxlvledc
Ай бұрын
uum.....you're a genius...a tape measure in the shape of a pen...it needs to happen
@bobbymills4476
19 күн бұрын
What would be a good one for the old Leatherman Super tool 300?
@JoePhoenix93
Ай бұрын
Hey Maxlvledc. Do you have some sheath recommendations for carrying a leatherman surge with the extender bit and bit kits? And maybe a flashlight or pen too?
@maxlvledc
Ай бұрын
Skinth solutions is best imo
@kathleensmith370
Ай бұрын
thanks
@Patriotfever
Ай бұрын
Hey Dom could do one of these for Non leather materials like cordura? I love leather also but moisture and sweat is very predominant in my line of work
@maxlvledc
Ай бұрын
best one is likely skinth solutions.
@billymolina6675
23 күн бұрын
What is your opinion on a substitute item for the flash light slot on the main street forge sheath ? I already have a aurora a3 flashlight on my keys i was thinking aluminum pill container to hold bits or first aid ?
@ORVONTON64
Ай бұрын
Well, it's a great idea, my problem is, i already have so much crap hanging off my waist that i can't keep my pants up.. not to mention available space
@pretentiousname01
Ай бұрын
Time for suspenders! 4 more straps for stuff!
@maxlvledc
Ай бұрын
haha, classic
@ORVONTON64
Ай бұрын
@pretentiousname01 indeed.. the thought has occurred... lol
@waltherjaksx8172
Ай бұрын
And the last one is sold-out nice
@maxlvledc
Ай бұрын
is it??
@waltherjaksx8172
Ай бұрын
@maxlvledc "currently unavailable" 💀
@Whiteys_knife_obsession
Ай бұрын
The main street forge one is in stock on Amazon and on their website also
@andrew_behrens
Ай бұрын
You should tell nextool to build a powerpint competitor
@maxlvledc
Ай бұрын
they did, W2 its amazing.
@nilmarklohpontes1735
Ай бұрын
@maxlvledc ordered mine last week, waiting for delivery and very excited!
@friesenwayne5320
Ай бұрын
Looking for multi tool and arkflex
@maxlvledc
Ай бұрын
all of these should work fine with arkflex
@toddmarrazzo187
Ай бұрын
Dom
@DeepFriedDoom
Ай бұрын
It’s a shame TOK doesn’t ship their products to Asian countries, and they’re pretty rude about it when you write in to ask. Something about exposing themselves to counterfeiters. Frankly it’s money on the table they’re ignoring.
Пікірлер: 58