👉 Get your free bonus downloads here! edverosky.com/subscriber-bonus/
@tmewborn1
Жыл бұрын
Nice, I have rhe X1T I bought years ago, and had no idea how to use until i decided to set up a small Home Studio, and began to watch Your excellent Training Videos. Thanks very much aftet this I may very well purchase the X2T.
@bala1000mina
15 күн бұрын
Thank you Ed for the helpful comparison video! God bless, good luck and keep creating!
@fotowalo
3 жыл бұрын
Thx a lot. I use the XproN. Simple to use and far better then the X1T. I like to work with Godoxflashes. Great value for money.
@sunrise_sunshine
2 жыл бұрын
Spot on video for me because I am yet to receive XT2n for my Nikon camera and I was confused am I made a mistake buying XT2 instead of XPro but now I know, I made the right choice. Thanks for the video.
@rjtuts-photoshoptutorials1611
3 жыл бұрын
Ive just got some Godox strobes to see how they perform and i'm really impressed - they are awesome!
@H3XIUS
3 жыл бұрын
Does the X2T have a PC sync port? I do love my X-Pro-N, it's (in my opinion) much, much better than the X1T- N, minus not having a PC Sync port. Unfortunately the PC Sync is something I use with a few different triggers, so I'll have to buy another X1T-N (I sold my old one when getting the XPro) to use those triggers. Unless I can figure a workaround anyhow. That said, otherwise the X-Pro is the best I've used.
@angelisone
3 жыл бұрын
It has ATG Bluetooth & ATG PC SYNC IN 2.5MM. ATG disabled the Bluetooth on X-Pro.
@blakecamp5848
3 жыл бұрын
Fantastic and as always very informative . Any chance of any videos on using v flats?
@edverosky
3 жыл бұрын
I would love to. I’ve used them extensively in the studio but not so much at home or outdoors.
@policeluber6720
2 жыл бұрын
I have a YN ex - 85 and 2 YN - 685 or 622 that are both wireless hss ttl just YN version for my canon. 1dxii
@harrr53
Жыл бұрын
Is it easy to set any of these to not use TTL and HSS at the same time? The Canon R5 has an issue with these units where it just uses full power when using TTL+HSS. But to me this would not be an issue if I can just have HSS always disabled. It's not needed for what I want to shoot.
@policeluber6720
2 жыл бұрын
What I do I have YN wireless ttyl flashes but my trigger s never accurate and idk how I get it to work at times
@tnargs57
3 жыл бұрын
Let me know if you can figure out how to make the X2T Sony’s AF Assist light work with Sony A7 series (it looks like that is your camera, and mine too). SURELY the big advantage of moving from infrared AF Assist with the X1T to visible light with the X2T was that it would work with Sony cameras (which have an IR filter and hence couldn’t work with an IR AF assist light). I bought the X2T and my first attempts to make AF Assist work are unsuccessful. Cheers
@ammaralnaboulsi3847
3 жыл бұрын
Well explained!!
@edverosky
3 жыл бұрын
Thanks!
@foosleboo
Жыл бұрын
I have the X1 Triggers and Receivers. Can you combine a X2T with a X1R?
@bachelor_cooking522
Жыл бұрын
How many volts of AA battery is applicable for this trigger? 1.2 or 1.5? which one
@AJCoReTV
Жыл бұрын
X2T vs the new 2023 Xpro II ?
@sadippanda3980
3 жыл бұрын
Does godox X1 trigger or any godox assesories work with canon RP.? Please share
@antonnyjm9187
3 жыл бұрын
Yes !
@rajlimbuphoto
3 жыл бұрын
thank you soo much I am new to flash photography and I am learning soo many things from your video .can we use godox XPRO to sony A7s3?
@edverosky
3 жыл бұрын
As far as I know, as long as you use the SONY version of the XPro, you're good to go.
@MrZipjohn227
3 жыл бұрын
which one to move to my nikon d4?
@MTimWeaver
3 жыл бұрын
the one thing the X1-T has that I don't think the X2 has, and the X-Pro does not (I have X1 and X-Pro units) is a PC flash connection. It's the reason i won't get rid of the two X1 units I have, because I can use them with my TLR or 35mm SLRs that don't have a hot shoe to shoot in studio with off-camera flash.
@H3XIUS
3 жыл бұрын
Yup. After I upgraded to an X-Pro trigger I realized that. I have a couple setups that need a PC Sync connection, so I have to buy another X1T-N. Whoops. (edit: or X2T, I forgot that existed until Ed brought it up in the video)
@angelisone
3 жыл бұрын
Anyone please chime in of this question: Does your model has a true ATG top mount true TTL hotshoe (ATG TTL/TCM)? Over 94% of the X2Ts does not have ATG TTL & ATG TCM I was lucky one X2Ts has ATG Bluetooth, ATG TTL, ATG TCM functions & fully compatible with ATG/Canon/Jinbei/Orlit/Westcott/Rollei. And best that it has three neat features: ATG/Canon/Profoto/Sony RT systems
@chewkenghong
8 ай бұрын
Just got a x2t. Been using x1t and something weird w the x2t. Subject is my white cat, w x1t, images comes out tack sharp(Fuji 56/1.2@f4) but when I switch to x2t, images were softer and quiet often slightly oof. I know it doesn't make sense but I kept switching between the 2 transmitter firing a v860iii and results were consistent. Images using x2t were softer and require dehaze to match that if x1t. Anyone knows what is happening? All on ttl
@scott-lc8xc
3 жыл бұрын
Any one know if you can use any model specific flash on the hot show of the X1 or X2? I have a Nissin i400 for Fuji and need to know if it will work on the X1/X2 triggers fro Fuji. Or does the hot shoe on them only work for Godox flashes? Thanks in advance.
@lukogs
3 жыл бұрын
I use the Yongnuo trigger as Remote shutter button for my EOS 200D/Rebel SL2 for long exposure.
@wishmaster3000
3 жыл бұрын
Awesome video!!! I got the Flashpoint version of the XPro (R2 Pro Mark II C) to activate two Flashpoint round head flashes (Zoom Li-on X R2 TTL Speedlight). I can only imagine the possibilities
@edverosky
3 жыл бұрын
From what I’ve heard, purchasing through a retail outlet under a branded version offers some security if things need to be addressed. So I like the flashpoint option, too.
@wishmaster3000
3 жыл бұрын
@@edverosky BTW I love the way you explained it all: clear voice, easy to understand without getting too technical (at least in my opinion). Thank you for sharing
@sandygeddry724
3 жыл бұрын
This is mounted onto the camera, but what do you put on the flash to make it work with the transmitter?
@timothyabioye7026
3 жыл бұрын
Godox flashes have inbuilt 2.4G receivers. So nothing is required to attach - just set it in the flash menu.
@clickonstudio2154
2 жыл бұрын
Sony A7III + Godox X2T - S Firing Remote Flash but it cannot capture the flash light
@rachelg7371
3 жыл бұрын
Lol, I still have and use the Pocket wizard plus II most of the time. Interested in learning HSS. Thank you 😊
Жыл бұрын
Thanks. Helped me decide on the X2T I was already leaning towards.
@policeluber6720
2 жыл бұрын
At 5. In that should be new form ware on all YN flashes with ttl hss wireless units ! Wtf ??
@MrSilesrafael
3 жыл бұрын
I also learned simple poketwizard at college and figured go buy 2 AD400 a d a1 AD600 flash units, I purchased a XT2 (s) because it was the latest released, I have a A7RIV and A7RII, and would like to figure out HSS... I was told that the camera can just auto sync etc etc... But I haven't taken a photo faster than 1/250...any input
@edverosky
3 жыл бұрын
Have you tried setting Menu > Sync > H (high speed sync)?
@simianinc
3 жыл бұрын
Thanks or your round-up. The X2T isn’t very intuitive IMHO. For instance, I bought it to a studio that had Godox lights, but they used them on a different channel. I couldn’t figure out how to change the channel on my trigger - there isn’t a dedicated button. In the end, I had to change the channel on all the lights. I also own the other two triggers, which are pretty easy to use - although setting up stroboscopic flash on any of them isn’t very intuitive.
Пікірлер: 42