If this video helped you, please consider clicking on the THANKS button above to support my channel 🙌 Watch this video next for a mower that was under a house for 5 years! kzitem.info/news/bejne/q4Bop4tmiJ5-jKg
@HobbyMotorDK
Жыл бұрын
A master class in how to get a mower back on it's feet / wheels 🙂 Thanks for the mention👍
@TheLawnmowerLady
Жыл бұрын
Any time Claus! I realized this was the epic shout out video too! Cheers!
@richardmorse5307
22 күн бұрын
As a youngster I was assigned the unenviable task of cutting our lawn with a 1950’s style reel push mower and catcher. Perhaps you can appreciate my elation at getting my hands on the most basic Lawnboy rotary 2 cycle mower. I started an unprofitable lawn mowing service by pricing my services too low just to get the job. I was very impressed with the durability and reliability of this mower. The only problem I had was the debris blocking of the wire mesh air filter. Never did disassemble it properly so only ran intermittently. Eventually the deck broke and that ended my career. I used to clean this reusable filter, sharpen the blade and lubricate the mower. It was so basic you had to rewind the rope manually after every unsuccessful pull. I was always amazed and delighted by the modern self propelled mowers with the auto rewind features!
@TheLawnmowerLady
20 күн бұрын
Things have changed for sure! Thanks for watching.
@BrucesShop
Жыл бұрын
That was great Stella. Still watching Spilled gas. I knew someone else spills fuel. LOL A classic repair.
@TheLawnmowerLady
Жыл бұрын
😁 Glad you enjoyed that Mr Bruce. Cheers!
@richardmorse5307
Ай бұрын
Best and clearest photography so I can follow each removal, cleaning and reassembly step.
@TheLawnmowerLady
22 күн бұрын
I appreciate you watching. Cheers!
@richardmorse5307
22 күн бұрын
@@TheLawnmowerLadyYou have taught your viewers and myself a lot. Please keep posting!
@VintageEngineRepairs
Жыл бұрын
Thank you for the shoutout! Great video as always - that has to be the biggest oil drain pan I have ever seen also, I still don’t understand how stale gas doesn’t smell horrific to you. Dealing with stale gas is the least enjoyable part of repairing engines to me!
@TheLawnmowerLady
Жыл бұрын
I agree it smells rather awful, but not retching awful, LOL! Cheers Tom! ( That's actually a water heater drip pan, though with my frequent and epic BP moments, it does serve as a gigantic oil drain pan. Haha!)
@richardmorse5307
25 күн бұрын
My compliments to you for your meticulous attention to detail that is completely understandable. Now I’ll see if I can return a self propelled Craftsman to life after being in storage for over 2 years.
@TheLawnmowerLady
22 күн бұрын
I have confidence in you! Cheers!
@richardmorse5307
22 күн бұрын
@@TheLawnmowerLady Thank you!!
@mattwickert736
Жыл бұрын
I am amazed that the main jet actually came out. I have had my fair share of them that I just left in because it was just going to strip the jet. If you want one of those cable removal tools, let me know. I 3D print them, and in my tiredness of the purple filament I was almost done with, printed about 20 of them lol. More than happy to shoot one over to you if you like!
@TheLawnmowerLady
Жыл бұрын
Thanks! I appreciate that. Cheers!
@mgomez5606
Жыл бұрын
Matt, what does I look like?
@mgomez5606
Жыл бұрын
I use to mess up those screws till I saw a video of yours. Bought a J2 and has been a god send since.
@TheLawnmowerLady
Жыл бұрын
Good move!
@mgomez5606
Жыл бұрын
@@TheLawnmowerLady even the idle screw is the same?
@TheLawnmowerLady
Жыл бұрын
@@mgomez5606 On most models I see, yes, it's metal with a non-removable jet. Others have a plastic removable jet that often needs new O-rings.
@johnrose132
23 күн бұрын
Thanks for the videos!! I work on small engines as a hobby & always learning from you! Thanks!
@TheLawnmowerLady
22 күн бұрын
Great to hear!
@marshallgrads
4 ай бұрын
I would love to see a video or two with you displaying the tools of your trade and how you use them. The special screw driver, the tachometer, etc
@TheLawnmowerLady
4 ай бұрын
Do you mean the JIS screwdrivers I often mention? If so, I did a giveaway when I hit 1K subs and that was one of the giveaway prizes. More in depth info (ignore the giveaway parts): kzitem.info/news/bejne/lH1ny2d5q5OrmnY I appreciate you watching. Cheers!
@1jantheman1
Жыл бұрын
Nicely done. Very informative and super editing. Your an awesome teacher. Thank you Bernie. LOL Yes I know your not Bernie but enjoy your humor.
@TheLawnmowerLady
Жыл бұрын
I do appreciate you watching. Cheers!
@robertbrooks7936
Ай бұрын
Thank you young lady, this is a great video. Very good explanation of the work you’re doing. I learned a lot.
@TheLawnmowerLady
Ай бұрын
I appreciate you watching. Cheers!
@garyclifton2180
Жыл бұрын
What can we say Stella you know your stuff always a pleasure to watch..x
@TheLawnmowerLady
Жыл бұрын
Thank you Gary! I appreciate you watching.
@garyclifton2180
Жыл бұрын
@@TheLawnmowerLady always a pleasure sweet lady.
@Phife_Diggy
Жыл бұрын
It amazes me the state people let machines get to, I treat mine like babies though🤣
@TheLawnmowerLady
Жыл бұрын
Your machine will last many more seasons.
@robalexander7348
Жыл бұрын
Nice job Stella, your a handy mower lady, you got it running well again 👍 Au
@TheLawnmowerLady
Жыл бұрын
Thanks 👍
@raymondcampbell2346
Жыл бұрын
Good job Lawnmower Lady! Saved another Honda.
@TheLawnmowerLady
Жыл бұрын
Cheers! Thank you for watching.
@jaimepadilla9548
Жыл бұрын
I always enjoy watching your videos. I been working on small engines from a while now but I always learn something new from watch you.
@TheLawnmowerLady
Жыл бұрын
Thank you very much!
@swingbelly
Жыл бұрын
Hi Stella. As usual, when it comes to mower diagnostics and repair, you are simply the BEST! Your videos have greatly helped keep my machines running smoothly for years. Thank you.
@TheLawnmowerLady
Жыл бұрын
Thank you very much! That makes me very happy to know I have helped. Cheers!
@dLLund
Жыл бұрын
ms LLL - thank you for posting. i enjoy watching your artistry. i admire your patience & good humor. - regards, dLL
@TheLawnmowerLady
Жыл бұрын
Thank you so much!
@s1mp13m4n
Жыл бұрын
There is a trend with your repair video. That trend being that you use OEM or quality parts. I have found that OEM parts just work. No poor quality control issues. Also, nice job on taking the time to clean the OEM carb. Some folks might replace it with cheap low quality no name parts. I have found that in general, the cleaned or rebuilt OEM carb with be of higher quality than a no name knock off. Nice job.
@TheLawnmowerLady
Жыл бұрын
Thank you! I appreciate your comments. The OEM parts honestly don't add that much cost, and I don't want returns, if I cheap out on a few $$.
@alans.4658
Жыл бұрын
This Honda mower will outlast the new bat-tree mowers that are being sold in the big box stores now. Great video, thanks
@TheLawnmowerLady
Жыл бұрын
You got that right! Cheers!
@waynestefinashen239
Жыл бұрын
Yep you gotta contact Brandon to get one of his cable removal tools works 100% in seconds. Don't you hate it when removing the recoil those studs come out instead of the nut loosening off? Seems like the previous person torqued the nuts down with an impact gun i think Nylock nuts with a washer work better never have this issue. 100% a super neglected mower and i think your right the guy picks them off the street gets you to fix them then resells them for a profit. What do you think? Nice job Stella you even got to use it to cut the lawn with it and with a little spit and polish and red spray paint on the faded recoil it would look like new.
@TheLawnmowerLady
Жыл бұрын
I suspect the previous person didn't do sh** except leave it out in the rain. That cable was rusted solid at the bottom there. This came from the RotoHoe guy BTW. No telling what the real story is... I appreciate you watching. Cheers Mr Wayne!
@Big_Johns
Жыл бұрын
Great video Stella, very concise and informative. 👍
@TheLawnmowerLady
Жыл бұрын
Glad you think so Mr John! Cheers!
@Big_Johns
Жыл бұрын
Anytime Ms Stella 🙂
@billbright1755
4 ай бұрын
If the carb bolts are installed in sequence with assembly then held up at slight angle it’s really easy to reinstall. The blower housing removed makes it even easier. Hondas are great mowers. Mine after many years of heavy use functions and appears as nearly new. It simply could not start easier or run better with just basic maintenance.
@TheLawnmowerLady
4 ай бұрын
I agree, the older Hondas are well designed machines. The only complaint I see regularly (though not experienced myself) is the rocker arms on the valves tend to get bent out of shape, making adjust the valves on GCV 160-190 engines impossible without replacement. Thanks for watchin.
@Kyle-bb9zp
4 ай бұрын
Can't believe it it fired up WOW
@TheLawnmowerLady
4 ай бұрын
Yep. A little TLC goes a long way
@brantsmallenginerepairs
Жыл бұрын
Hey Stella. When i have those nuts that won't come off the recoil, i will try to tighten it first then try to loosen with impact gun. Doesn't work every time but probably 80% of the time. Might be worth a try. As always, great video with good commentary of exactly what you're doing.
@TheLawnmowerLady
Жыл бұрын
You are so right! I forget if I tried that (probably,) but this gal sat out in the weather waaaaay too long. I appreciate you watching. Cheers Gerry!
@andersforrad
Жыл бұрын
Nice one - you rock Stella! Cheers 😀
@TheLawnmowerLady
Жыл бұрын
Thank you! You too!
@johnrose132
23 күн бұрын
Great video! Appreciate what you do! Great learning video!
@TheLawnmowerLady
22 күн бұрын
Glad it was helpful!
@Rein_Ciarfella
Жыл бұрын
Gee, that looked like most of the mowers I get in! 😂🔧👍
@TheLawnmowerLady
Жыл бұрын
Haha!
@lawrencecarroll2031
Жыл бұрын
Great video Stella!! I use 6m rod as well so much easier to assemble all the Honda paraphernalia!!.
@TheLawnmowerLady
Жыл бұрын
Right on! It really is a timesaver.
@jimbrewer2893
Жыл бұрын
Nice restoration Stella!!
@TheLawnmowerLady
Жыл бұрын
Thank you! Cheers!
@almclean4835
Жыл бұрын
Great job Stella. I fully agree, that mower wasn’t used last year
@TheLawnmowerLady
Жыл бұрын
You got that right! Cheers Mr Al !
@INSIDEHOUSEGARAGE
Жыл бұрын
that ultrasonic cleaner really worked well!
@TheLawnmowerLady
Жыл бұрын
There are a few tools I regret buying, but this is not one of those! Thanks for watching.
@barryewalt3250
Жыл бұрын
Great work Stella
@TheLawnmowerLady
Жыл бұрын
I appreciate you watching!
@rickthelian2215
Жыл бұрын
That was a challenge 😊 Well done😊
@TheLawnmowerLady
Жыл бұрын
Thank you Rick!
@haneyoakie14
Жыл бұрын
38:50 that breather tube is a pain and is much easier if your right hand has fingers. But even then, it is difficult.
@TheLawnmowerLady
Жыл бұрын
I can only imagine!
@gravelyman
Жыл бұрын
Good work Stella. It runs great 🔧👍
@TheLawnmowerLady
Жыл бұрын
Thanks 👍
@EmoDKTsuchiya
Жыл бұрын
Subscribed to your channel yesterday after your video helped me fix my neighbors GCV170 🎉
@TheLawnmowerLady
Жыл бұрын
Yay! Glad to help. I appreciate you watching!
@haneyoakie14
Жыл бұрын
170 needs repair already? Not a good sign
@EmoDKTsuchiya
Жыл бұрын
@@haneyoakie14 Was never serviced since new. Engine would surge whilst not even cutting. Deep cleaned the carburetor and replaced gaskets. Now it runs smooth
@TheLawnmowerLady
Жыл бұрын
@@EmoDKTsuchiya These machines do need at least some basic maintenance, that many folks won't bother to do. Glad you got yours going again.
@petefroud5308
Жыл бұрын
Great work Miss Steller.
@TheLawnmowerLady
Жыл бұрын
Thank you kindly Mr Pete!
@gadasavideos8564
Жыл бұрын
I put a nut on the left threaded rod to hold tight while replacing the right one. Frees my hand which usually was slipping anyway
@TheLawnmowerLady
Жыл бұрын
Nice idea. I honestly never thought of that.
@LewisMowersandBoats
Жыл бұрын
Got to love a Honda great show 😊
@TheLawnmowerLady
Жыл бұрын
You got that right!
@ChuckisOutside
Жыл бұрын
Great video. Please be careful with the gasoline. Especially the hot gas from the ultrasonic cleaner. It’s so easy to ignite.
@TheLawnmowerLady
Жыл бұрын
I appreciate you watching. Cheers!
@philliphall5198
Жыл бұрын
I’ve been prelubing the new cables with Napa silicone spray with the little tool Seems to last longer 😊
@TheLawnmowerLady
Жыл бұрын
I often do that, but the guy was chomping at the bit to pick up the mower, which as you can guess, he showed up 3 weeks later. Where is my ::rollingeyes:: emoji
@Kyle-bb9zp
4 ай бұрын
Least one thing no wet grass to clean out underneath
@tinkeringtaylor3053
Жыл бұрын
Excellent Stella, really good video, and it sounded really good ( you did say you liked using petrol to clean things down, but a bit expensive using new fuel 🤣🤣)
@TheLawnmowerLady
Жыл бұрын
Great point! Though I'd feel guilty if a mower came back with fuel problems, even 1 year old ethanol-free. (The rest of that can went into my Pruis, LOL! Thanks for watching Nev!
@RaysLaughsAndLyrics
Жыл бұрын
Have a great Independence Day🇺🇸
@TheLawnmowerLady
Жыл бұрын
You too! Cheers!
@billbright1755
4 ай бұрын
Compressed air blowing on magnetic fly wheel and WD 40 all contacts and pickup coil they spark powerfully. New plug and air filter fresh quality oil and gas sharpened balanced blades clean fins and insure drive system ratcheting gear mechanical parts are correct and cables and belts in service order. Mine has seen so much use I replaced the four bald tires from trouble free service.
@alexmaness7930
Жыл бұрын
brilliant! super helpful, stella!
@TheLawnmowerLady
Жыл бұрын
Glad it was helpful!
@marilynwitherell186
7 ай бұрын
Amazing, great job, P.S. I hope you charge the customer for new mower.
@TheLawnmowerLady
7 ай бұрын
I wish! I appreciate you watching. Cheers!
@mgomez5606
Жыл бұрын
I use a wire wheel on my drill to clean off the rust on the blade.
@vorhese
6 ай бұрын
Those studs are a godsend. These carbs are such a pain to reassemble. Why not just leave them in and use nuts? I wanna give you a tip from my world of vintage Triumph motorcycles. I use this stuff called Hylomar M on almost all my gaskets. It usually allows the components to pull apart without damaging the gaskets. It also works good at having questionable gaskets reseal. Or often, no gasket at all.
@TheLawnmowerLady
6 ай бұрын
Good call on the Hylomar. I use Hylomar Blue on my antique Lambretta rebuilds, and it comes in very handy if a bit of gasket material sticks or tears on this lawn/garden equip. Most of the commercial Hondas and some of the newer models do have studs. I think the airbox might need to be modified or swapped out to use studs to keep from warping the airbox. I appreciate you watching. Cheers!
@BADD400
Жыл бұрын
Great video. Fantastic job
@TheLawnmowerLady
Жыл бұрын
Thank you! Cheers!
@dLLund
Жыл бұрын
Thank you !
@TheLawnmowerLady
Жыл бұрын
Whoa! Thanks for supporting my channel. You're a great fan.
@dfields9511
Жыл бұрын
29:29 what you drinking there . A Carburetor drink 😂😂😂 Maybe some day I can justify getting one of those cleaners machines
@TheLawnmowerLady
Жыл бұрын
Gin sort of has that hint of a pine tree, right?
@JohnKoutsavlis
Жыл бұрын
Hi Stella, Love your videos and appreciate your vast knowledge of small engines. I really liked your yellow spark tester. Can you please let me know where I can get one? Thanks, John
@TheLawnmowerLady
Жыл бұрын
I think I purchased directly from the distributor. I haven't found any on AMZN, etc . Google up "Trillium Spark Check'R" I appreciate you watching!
@donnagavin4539
Жыл бұрын
Great job!
@TheLawnmowerLady
Жыл бұрын
Thank you! Cheers!
@TecumsehRulesbcserk
Жыл бұрын
I haven’t seen a mower spew that much black smoke before, it almost looked like a diesel at that point
@TheLawnmowerLady
Жыл бұрын
I know. Right? Thanks for watching!
@Pete.Ty1
Жыл бұрын
👍👍👍Thank you
@TheLawnmowerLady
Жыл бұрын
Welcome 👍 Cheers!
@philliphall5198
Жыл бұрын
That mowers been setting for 5 years, it’s covered in dirt and grass Only cleaning it got was the pickup ride lolo
@TheLawnmowerLady
Жыл бұрын
Haha!
@Inisfad
Жыл бұрын
Thanks!
@TheLawnmowerLady
Жыл бұрын
Oh wow! SUPER appreciation for you support of my channel. You ask great questions, and always have a unique perspective on so many of my topics. Cheers!
@brendahall7483
Жыл бұрын
Hi Stella, another great video. I just love your attention to detail. Where did you get your spark checker? It seems much easier to use than the standard kind. Can you provide a link? Keep up the good work.
@TheLawnmowerLady
Жыл бұрын
It's a great tool, but don't have a good online distribution system. I wish I had a good link for you. It's best to Google "Trillium Spark Check'R" and find someone who actually has it in stock. Their website mentions AMZN, but it's not there. I appreciate you watching. Cheers!
@Kyle-bb9zp
4 ай бұрын
Ngk. Or champion are good plugs
@ronniethode8036
10 ай бұрын
Great job Bernie LOL
@philliphall5198
Жыл бұрын
Dang how did they get it to bad shape in a few years 😮😮😮
@TheLawnmowerLady
Жыл бұрын
I think the guy was fibbing on me. No way that ran last year, or the year before, or before... I appreciate you watching.
@robertmailhos8159
Жыл бұрын
It would be e if you had the lawn mower cable lubrication tool for your help with this matter of the cable lubrication
@TheLawnmowerLady
Жыл бұрын
Could be, but this was rusted solid at the lowest point, no amount of lube could fix that. Thanks for watching. Cheers!
@robertmailhos8159
Жыл бұрын
@@TheLawnmowerLady that is a strange thing to have happen to this cable hopefully it is not expensive to replace it
@TheLawnmowerLady
Жыл бұрын
@@robertmailhos8159 Not too bad. I think it's about $10 bucks on that AMZN link in the description.
@robertmailhos8159
Жыл бұрын
@@TheLawnmowerLady thanks for the info on this cable young lady 💐🌹
@debrapugh1746
Жыл бұрын
great video showing your expertise in small engines. thanks for sharing. lawnmower lady, what mower do you suggest as a replacement to these hondas as honda stops making them this sept. ?
@TheLawnmowerLady
Жыл бұрын
That is a tough question. Lately my advice is to look for an older HRX (5-6 y.o. mower) Far superior machine. Parts will be available for a good while. I appreciate you watching.
@tjsmith5477
Жыл бұрын
Thank you! Would it be possible to do one on a weed wacker?
@TheLawnmowerLady
Жыл бұрын
I've got a few in this playlist: kzitem.info/door/PLscwXOlCLzlxo_dEcDTBgzz_2l1Hw-N6u Thanks for watching. Cheers!
@davea5150
3 ай бұрын
Nice lady 😊😊
@TheLawnmowerLady
3 ай бұрын
Thank you! 😃
@mikebarton6391
Жыл бұрын
Nice vid as always! Where can I get that squeeze bottle with the brass spout for the homemade penetrating oil??
@TheLawnmowerLady
Жыл бұрын
That's a Pressol 06864 125ml bottle. It seems they are readily available in Europe, but scarce in the States. I found mine on ebay. Another great suggestion from my good friend Tom, @vintageenginerepairs. Shipping can be very expensive, often a good deal can be found. I appreciate you watching.
@sivucit
7 ай бұрын
hi at 5:03 you are using a bottle with brass connection to pour gas in intake. where did you bought that.. seems like it is available only in UK and Australia.. I see something in Amazon which is GEDORE 298-01 from amzon . like to see where u got it..
@TheLawnmowerLady
7 ай бұрын
I had to get mine from ebay. The item I purchased was Pressol 06864 Graisseur avec Laiton Bac 125ml It shipped from UK. As of writing this, there seems to be two sellers that list this, one with crazy expensive shipping to US, and the other with more reasonable shipping. I did have a bit of trouble with one of the three I purchased (it was defective) and went in a few circles with the seller before they finally gave me a partial refund. Thanks for watching.
@BSSMALLENGINES
Жыл бұрын
Woohoo a shout out from The Lawnmower Lady. Stella send me your address I will send you one of those tools
@TheLawnmowerLady
Жыл бұрын
Cheers Brandon. Thanks! I'll shoot you a DM.
@philliphall5198
Жыл бұрын
Have you seen the new style It’s really faster and easier to use
@FountainCityVol
Жыл бұрын
Would the stainless steel studs trick also help on the GX160 Honda engines? Getting ready to repair a pressure washer.
@TheLawnmowerLady
Жыл бұрын
I know on a GC190 pressure washer, they could have been a bit longer: kzitem.info/news/bejne/w22izJqBgIyLpno
@lv2keepfit493
Жыл бұрын
Sub'd from Canada, great channel. I started with a couple Honda mower videos and I appreciate the break down and information. I have this similar mower but self propelled model/bagger. Do you have a video on governor adjustments for Honda mowers and maximum RPM ? I assume by your digital meter to keep it below 3200 rpm? Thanks !
@TheLawnmowerLady
Жыл бұрын
Awesome, thank you! I don't have a specific video on that, but I have enough dead engines laying about, that would make a good video. There's some complicated math based on blade length to determine maximum safe blade velocity, but math is hard, LOL. I suspect 3200 is just fine. I appreciate you watching. Cheers!
@artriumph
Жыл бұрын
Good video. Isn’t the emulsion tube supposed to have a couple of O rings on it?
@TheLawnmowerLady
Жыл бұрын
Not on this style of carburetor. Thanks for watching. Cheers!
@philliphall5198
Жыл бұрын
Have you heard the news Honda has stopped sales for now because of the cam shaft problems with compression release plastic parts breaking Dealers can’t sale any now
@TheLawnmowerLady
Жыл бұрын
Interesting, I had not heard that!
@happyyardservice2914
Жыл бұрын
Where do the bottle for the bolt loosing stuff? That is exactly what I am looking for.
@TheLawnmowerLady
Жыл бұрын
It's a Pressol 06864 125ml bottle. Readily available in Europe, very rare in North America. Cheers!
@happyyardservice2914
Жыл бұрын
@@TheLawnmowerLady Girl, that is the story of my life. Seems anything of high quality I have to order from England. LOL Thank you for the info. :)
@raymondcampbell2346
Жыл бұрын
Those stainless rods you got off Amazon, what was the length on them? Or did you have to cut them down?
@TheLawnmowerLady
Жыл бұрын
I cut one of them in two, cleaned up the threads, and cut a slot with a Dremel tool on one end.
@JA-gx4hb
Ай бұрын
So what was the final bill? Can't imagine it was worth it to get a pro to fix a mower in that bad of shape.
@TheLawnmowerLady
Ай бұрын
It was more than the guy was expecting...
@coastalpoodlerescue
8 ай бұрын
😊😊👍👍
@TheLawnmowerLady
8 ай бұрын
I appreciate you watching. Cheers!
@mgomez5606
Жыл бұрын
Can you use pine sol on ultrasonic cleaner?
@TheLawnmowerLady
Жыл бұрын
kzitem.info/news/bejne/sWyem2h5qZWgp4I
@haneyoakie14
Жыл бұрын
29:00 Bernie, er Stella, is your PineSol a 50/50 mix or straight PineSol, or something else? Great detailed video!
@TheLawnmowerLady
Жыл бұрын
Thanks Tom! My mix is around 4:1 water:Pine-Sol. It rarely fails me.
@haneyoakie14
Жыл бұрын
@@TheLawnmowerLady I use the Dollar Twenty Five Tree equivalent, PineGlo and don’t really measure except by eyeball and color. My original HF ultrasonic died, I bought a Vevor one that I like. Then my daughters bought me another HF one for Father’s Day. I might just keep the new HF as a backup, I hate to take it back because it was from the kids.
@TheLawnmowerLady
Жыл бұрын
@@haneyoakie14 Aww, that was sweet of them to do that :)
@mgomez5606
Жыл бұрын
I hate those fuel line clamps.
@TheLawnmowerLady
Жыл бұрын
I agree.
@mgomez5606
Жыл бұрын
Mam, what state do you live?
@mgomez5606
Жыл бұрын
Pine Sol works? My wife uses it.
@TheLawnmowerLady
Жыл бұрын
That's my go-to solution for near about everything.
@Inisfad
Жыл бұрын
Now, here’s a mystery….with such a poorly maintained mower, you wouldn’t assume that the owner took the time to clean it when putting it away, or taking it for repair. But there is not a blade of grass under the deck…..????? I definitively think he picked this up off the side of the road…..
@TheLawnmowerLady
Жыл бұрын
I never thought about it like that, but you might have hit the nail on the head. I appreciate you watching!
@davea5150
4 ай бұрын
Do you answer questions?
@TheLawnmowerLady
4 ай бұрын
Sure!
@RaysLaughsAndLyrics
Жыл бұрын
Our Bonnie is lied over the condition Our Bonnie doubts client honesty Our Bonnie is lied over the condition Bring your mower for Bonnie to see Bring Your, Bring Your Bring Your mower for Bonnie to see Bring Your, Bring Your Bring Your mower for Bonnie to see Our Bonnie fixes the ignition Our Bonnie revives the Harmony Our Bonnie cleans with precision Bring your mower for Bonnie to see Bring Your, Bring Your Bring Your mower for Bonnie to see Bring Your, Bring Your Bring Your mower for Bonnie to see Our Bonnie rewinds a starter Our Bonnie cleans carb venturi Our Bonnie sharpens the cutter Bring your mower for Bonnie to see BringYour, Bring Your Bring Your mower for Bonnie to see Bring Your, Bring Your Bring Your mower for Bonnie to see Our Bonnie works on Honda power Our Bonnie fixes Briggs an' Stratton Our Bonnie is a great You Tuber Watch now for a Bonnie lesson. Bring Your, Bring Your Bring Your mower for Bonnie to see Bring Your, Bring Your Bring Your mower for Bonnie to see
@TheLawnmowerLady
Жыл бұрын
You put such a smile on my face!
@Kyle-bb9zp
4 ай бұрын
Just put a new carb on it that looks awful
@TheLawnmowerLady
4 ай бұрын
That too, but I try to show how to DIY repair, not just throw parts at a machine. Some of those cheap aftermarket carbs are hit and miss. That said Honda OEM carbs are surprisingly inexpensive.
@ThePhatGuy1776
5 ай бұрын
Diesel works much better
@paddyschannel217
Жыл бұрын
Great video …. Top draw standards of work too 👍🏻
@TheLawnmowerLady
Жыл бұрын
Many thanks
@Ram14250
Жыл бұрын
That owner needs to be horse-whipped! Honda-mower abuser! Did the animal ever change the oil?
@TheLawnmowerLady
Жыл бұрын
Especially with all the troubles with the newer Hondas. No doubt he never changed any oil.
Пікірлер: 193