I just ordered that exact setup from Costco. I can’t wait for it to come in.
@jbpasion071
4 жыл бұрын
Loving my Newage Cabinets as well! Awesome channel keep it up!
@TheFrost7092
4 жыл бұрын
Thanks, glad you like the content.
@jbpasion071
4 жыл бұрын
Frost7092 no problem! I also made a vlog on my channel if you want to check it out! Much appreciated!
@jonathanrafallo2177
2 жыл бұрын
Excellent set up man! Glad to know there are others out there that have a neatness problem! Very clean and organized, just the way I eventually will have mine. How are the New Age cabinets holding up. I'm looking for metal wall cabinets and was New Age was in the mix. Thanks!
@canonman223
4 жыл бұрын
I like the white box behind the bamboo worktop. Since the cabinets aren't flush against the wall, doing what you did closes the gap on the back side between the worktop and the wall. Did you build that or find something already the size you needed?
@micaladunn5158
4 жыл бұрын
Looks like you have a concrete trim at the bottom. What did you use for spacing behind the upper cabinets and how did you trim out the sides? Your finished project looks very nice.
@TheFrost7092
4 жыл бұрын
Micala Dunn thanks for the kind words about the set up. The concrete at the bottom is the foundation for the garage. We used 2x4s to pack out the space behind the upper cabinets and then used a plastic composite trim board to make up the space between the wall and the cabinets.
@joseluisruiz3789
3 жыл бұрын
This is awesome, I've been looking for something like this for my basement. I'm getting into CAR Audio DIY projects and started a KZitem channel and currently do all my stuff outside in my backyard from pre wiring amplifier racks to using a router table. This would be great for those wiring projects and to store my router bits properly etc. Is it really 11 feet long?
@canonman223
4 жыл бұрын
Isn't there supposed to be a metal trim piece to put in front of the lights so they deflect the light towards the back wall and not in your eyes?
@B6jfkmx
3 жыл бұрын
Thanks for the video, I’m looking at getting this exact same setup from NewAge. Quick question, are the drawers in the tool box ball bearing by any chance?
@YoungJIg5
3 жыл бұрын
Clean, where did you get the workbench stool?
@sophiazenlizardo4660
3 жыл бұрын
Where did you connect/plug those under cabinet light?
@jontansgarage
3 жыл бұрын
How are the drawers? Do they open smooth and close softly? Not quite able to tel in your video.
@TheFrost7092
3 жыл бұрын
Yes they are very nice
@luv2machine
4 жыл бұрын
Looking to buy the exact same setup. Where are the lights plugged in. Do I need an outlet behind the cabinets? I don't want to see the cord if possible.
@TheFrost7092
4 жыл бұрын
luv2machine the lights plug into each other to make a chain, then plug into a wall outlet behind the cabinets so you must have a wall outlet near by. The cord is pretty long though.
@ashontayowens8010
4 жыл бұрын
I love this. It's so nice and clean. my question is what's the length of the bamboo shelf?
@TheFrost7092
4 жыл бұрын
ashontay owens the work station is 6 feet wide by a little over a foot and a half deep.
@ashontayowens8010
4 жыл бұрын
@@TheFrost7092 awesome! thank you so much for the quick reply
@TheFrost7092
4 жыл бұрын
@@ashontayowens8010 no problem good luck with your future projects
@tacticaltrumpet3561
4 жыл бұрын
What are the blue plastic bins that you used for your detailing stuff?
@TheFrost7092
4 жыл бұрын
Tactical Trumpet they are just old cheap bins that lock together not sure where you can get them we have had them for years.
@terrysmith775
4 жыл бұрын
I have the same Newage setup. I can't put it flush to the wall. Did you just put a wood frame to fill in that void on the back wall?
@TheFrost7092
4 жыл бұрын
Terry Smith yes we packed out the back with 2x4 boards and then put a trim piece on the outside so it looks cleaner
@JamesBergeron
4 жыл бұрын
@@TheFrost7092 Looks great, I just ordered a set and was debating what the heck to do with that gap.
@TheFrost7092
4 жыл бұрын
drivesideways thanks man I think you will really enjoy them to me they are the Best Buy for your money.
@JamesBergeron
4 жыл бұрын
@@TheFrost7092 Ha yes, I paid $2000 cdn delivered from Costco. I got a quote from ProSlat it was $5000 and another company was $13000!! Insane. I think the proslat would be more comparable to the pro series(larger and heavier) but it's just a cabinet... I may steal your frame idea, but I am using peg board behind the bench I was going to bump out the pegboard the 4-inches ... find out soon it shipped yesterday!
@TheFrost7092
4 жыл бұрын
drivesideways that’s a great idea, good luck with the project!
Пікірлер: 33