💚💚Try our membership for only $1! Join now: makersgonnalearn.com/dollar-deal 💚💚
@yvonnealvizo
5 жыл бұрын
The four new tools are so AWESOME to work with!! For those of you who haven't purchased yet they are a MUST get!! The deboss is so professional looking isn't it!! I think a great follow up video would be to see various sample inking techniques on the debossed lettering/designs.🙋🏻😍😘💜💕 TFS
@MakersGonnaLearn
5 жыл бұрын
Thank you, Yvonne :)
@m2garcia1
4 жыл бұрын
Excuse my ignorance but...what is the difference between debossing and embossing. I know both tools look different. I do not know the difference between one and the other. They seem to do the same thing.
@kimdianebahr7914
3 жыл бұрын
In traditional printing, debossing is what is shown in this video. The design is pressed into the surface from the front side. Embossing is causing the image to be raised by applying pressure from the backside against a stencil or plate. If you do a general search on embossing, you will find samples of small brass plates with paper laid on top, upside down, and the paper is rubbed with a stylus to conform to the shapes in the stencil.
@alicias.ferrari4089
3 жыл бұрын
So... to emboss, would I use the foil and mirror the image? This short video only showed how to deboss. 2 completely different looks.
@georgiadreamingbb1245
4 жыл бұрын
So it debossing not embossing in this video.. title mis lead me.
@CrystalWilliams-rt3zm
5 жыл бұрын
Thank you Tanner For Showing us all these tools and also for telling us not to remove the plastic piece
@MakersGonnaLearn
5 жыл бұрын
Thank you for watching 😊
@mrs.alabama
5 жыл бұрын
Tanner can you show the different types of paper/ cardstock/material is best with all the different cutting tools? Mainly the debossing cause Im a little confussed with what to use. Thank you
@ssharp11
5 жыл бұрын
Excellent review of some of the new adaptive tools. I am excited about the new state cut files. Wishing you Tanner a super week as well as Rachel, Courtney, Joe, Blake and the entire MGL team. Hugs Susan
@MakersGonnaLearn
5 жыл бұрын
Thank you, Susan 😊
@Jana-TheCraftyGambler
4 жыл бұрын
ssharp11, I was thinking the same thing, but I bet you could lay your paper or other material facedown on the mat and mirror your image and you would get the embossed effect. I will have to try this to see if it works or not but it stands to reason it should.
@kennedygessner8717
Жыл бұрын
The EXACT tutorial I was looking for Thankyou!!
@MakersGonnaLearn
Жыл бұрын
You're welcome!
@KateLB1027
5 жыл бұрын
What an awesome little tutorial! Thank you! I wasn’t sure how to use these tools, so I thought that I didn’t need them. Now I need these 😂
@MakersGonnaLearn
5 жыл бұрын
You'll love these for sure 😊
@bridgetd3403
5 жыл бұрын
OMG can’t wait for the state cut files!
@MakersGonnaLearn
5 жыл бұрын
Coming soon! :D
@karidadramis-hartman4857
5 жыл бұрын
Hola Tanner, hope your doin awesome. Thanks so much for the awesome tips & great lessons. Also showing us how it will look since we don't get on it as soon as you do. Always motivates me and so glad I have your membership cuz you do all the leg work that I know I can trust. And makes when I do it so Simple Babes.. Karidad
@MakersGonnaLearn
5 жыл бұрын
Aww, thank you Karidad ❤
@TheTerrormisu
4 жыл бұрын
Followed your instructions to a T, used the same foil paper, turned out great except a little "curly" because I used my green mat. I would be lost without you!
@MakersGonnaLearn
4 жыл бұрын
you are too sweet! Thank you!
@Mary-or6io
3 жыл бұрын
I just but the cricut and maker3, and it’s my first cricut ever so I have no idea how to use it and I’m going to need to learn from KZitem university so I’m so happy I found your account!
@MakersGonnaLearn
3 жыл бұрын
Yay! Welcome!
@jackiedcruze2512
2 жыл бұрын
Caption says emboss! I already know how to deboss!
@mamarose5
5 жыл бұрын
I would love to see a comparison video on engraving tools.
@barbararead7490
5 жыл бұрын
Tanner, since I have yet to purchase an engraving tool, I would love to see a comparison, especially using an acrylic Blanca for a keychain. Love you guys.
@hsepulveda1
5 жыл бұрын
Thanks Tanner! Excited to get these tools!
@MakersGonnaLearn
5 жыл бұрын
Thank you for watching 😊
@Retire0108
Жыл бұрын
Will the embossing tool work on metal military tags . If so, can you do a video? Want to make 70 for a party!
@elizabethdiaz8001
4 жыл бұрын
You are amazing and explain everything with so much patience, I do have a question: how can I emboss? Thanks
@MakersGonnaLearn
4 жыл бұрын
Thank you for your kind words! You've come to the right video, this one will teach you how to emboss :)
@cheryllglowacki7486
4 жыл бұрын
@@MakersGonnaLearn I just watched the above informative video but I didn't see any mention of embossing, just debossing. Can the maker emboss cardstock or vellum?
@barbararead7490
5 жыл бұрын
So happy we will be getting the STATES
@MakersGonnaLearn
5 жыл бұрын
Thank you for watching 😊
@ForTheWin001
4 жыл бұрын
Does this work with craft leather/ faux leather? Or will it not print deep enough? Is there a better way to do it ?
@MakersGonnaLearn
4 жыл бұрын
There is also an engraving tip that is recommended for thicker fabrics :) amzn.to/33Jhqt8.
@jaelynrae5493
3 жыл бұрын
Haha, because I don't read instructions, I too tried prying off the clear top from the quick swap housing. 🤦🏼♀️
@studiovulcan4411
2 жыл бұрын
What was the sheet you were using, almost looked like a shiny leather?
@cindygraham1418
4 жыл бұрын
I would love to hear about other blade and also comparison. Thx!
@MakersGonnaLearn
4 жыл бұрын
This video might help you. kzitem.info/news/bejne/xWuurWaLanmde4o
@julietekell4057
Жыл бұрын
Can you use the Cricut maker to deboss/emboss on parchment paper?
@hiitsree1849
5 жыл бұрын
Hello, thank you for making such fun and informative videos. I am interested in a comparison video between the cricut vs off brand for the engraving tool. Thank you so much for your time.
@MakersGonnaLearn
5 жыл бұрын
Yay! Thank you for watching :)
@SunsetCookieCutters
Жыл бұрын
Hi,Can it be used for embossing parchment paper
@sumbl1ss
Жыл бұрын
Im on laptop, and it’s not letting me contour from basic cut . There isn’t ‘actions’ I made my own logo.. finding one from images allows it to contour. :/
@victoriameek661
5 жыл бұрын
Tanner, please compare the 2 different engraving tips. I LOVE my off market one but would like to see if there’s a difference.
@jodisteuber3945
3 жыл бұрын
I have a question. I could have sworn in one of your videos you mentioned that you could take a pen and mark the embossed image and I can't find it. I was looking to have my embossed image stand out just a little more. Is this possible?
@sarahdyer5305
3 жыл бұрын
Do you think this would work on a photo mat to add the picture details? Or would that be more engraving? Thoughts on best way to do that?
@lauriemartin5450
5 жыл бұрын
I just received all the same tools. dying to try them. not sure what or all that can be done. so any videos show what materials can use would help greatly. ty when are the maker boxes going to be sent out ..going crazy. ty
@cynthiastarkey9088
4 жыл бұрын
can the debossing blade work on leather? can you show a demonstration?
@MakersGonnaLearn
4 жыл бұрын
You can! We will be making a project in which we deboss on leather soon! Keep an eye out
@deesmith8368
3 жыл бұрын
Great video. Can you deboss on fondant icing?
@MakersGonnaLearn
3 жыл бұрын
You cannot. The Cricut Maker is not Food Safe and fondant is not something you can deboss. Sorry!
@juliansimpkiss2372
2 жыл бұрын
Can you print deboss and cut on the maker 3. Nice presentation. Thanks
@MakersGonnaLearn
2 жыл бұрын
Thank you. We're happy you liked it. Yes. You can print, deboss, and cut with your Maker 3.
@juliansimpkiss2372
2 жыл бұрын
@@MakersGonnaLearn Thanks 👍
@alicebair1811
4 жыл бұрын
My fine point blade won’t cut that kraft board. Any advice?
@MakersGonnaLearn
4 жыл бұрын
Change your blade? Add more pressure? Cut it twice?
@juiiced1018
2 жыл бұрын
Does this work for Folders?
@dewanna1801
3 жыл бұрын
Will the Maker deboss on thin sheets of craft foam?
@kpnutz52
4 жыл бұрын
Can I deboss a whole shape? Not just the outline?
@MakersGonnaLearn
4 жыл бұрын
No, Cricut does not do that, unfortunately.
@dilenj
3 жыл бұрын
Hi, I like watching your videos. Is it possible to tell which blade is for? Or what kinds of tips cricut maker have, because I'm going to Brazil and need to buy them before to go. Thank you!!!!
@MakersGonnaLearn
3 жыл бұрын
This video might help you out .kzitem.info/news/bejne/xWuurWaLanmde4o
@jodisneyfan4758
5 жыл бұрын
Tanner can you share how you store all of these different blades? I just bought the maker and understand these 5 are new blades but there others as well. Is there a cute storage system to keep them in?
@KitClan
4 жыл бұрын
Joanne, What my wife and I did was just go to the Pharmacy and bought some of the brown pill vials. The size is about 3" tall and 1 1/4" diameter. Be sure you get the lids with it. They should be the ones that you can either just unscrew or put on so they are child proof. If you want to protect the blade ends, just push some Kleenex or cotton balls down in the bottom. Works beautifully. YourConscience
@ttcu1163
4 жыл бұрын
Hi I just bought the scoring wheel combo pack, does that housing work with the engraving tip, and deboss? or i have to buy another housing? i heard someone mentioned that it'll work. thank you :)
@MakersGonnaLearn
4 жыл бұрын
Yes, the housing that comes with the scoring wheel is what's called the "quick swap housing" and can be used for those tips as well! :)
@ttcu1163
4 жыл бұрын
Makers Gonna Learn thank you. I’m so overwhelmed with cricut blades, but your channel helps so so so much. Thanks. ;)
@aliciam.7966
5 жыл бұрын
O.M.G.!!! 😱 😱 😱 NEW STATE CUT FILES!! 😱 🥳 🥳 CAN'T WAIT 😁 😁..... You keep saying "Debossing" isn't this the same as "embossing" with the embossing tool that you put in clamp A, what is the difference?
@aliciam.7966
5 жыл бұрын
I think the tool is the Scoring tool (that I'm thinking about) that goes in clamp A, but yes what is the difference between the two.
@Jana-TheCraftyGambler
4 жыл бұрын
Alicia M. Debossing, presses the image downward so you have a flat image and emboss raises the image so you’ll feel the image raised. . I had mentioned on another post but I think if you mirror you image and place your material face down on mat, it will EMBOSS you project.
@connielaboy7575
5 жыл бұрын
In your professional opinion which is better, the maker or explore air 2?
@MakersGonnaLearn
5 жыл бұрын
The Cricut Maker! :) It has the Adaptive Tool System which opens up so many more opportunities to craft with different materials.
@sandraweeks4138
5 жыл бұрын
Need the engrave tool video, please.
@loopdloop9859
5 жыл бұрын
So I just bought the scoring tool. Now I'm wondering what's the difference between debossing and scoring. By the way, I'm new at all this... Lol. Could I connect the debossing or wavy lines etc... To my scoring housing? Thanks so much for your videos!👍😍😘😉
@MakersGonnaLearn
5 жыл бұрын
Thank you for watching 😊
@loopdloop9859
5 жыл бұрын
@@MakersGonnaLearn ?
@cindybrown5254
5 жыл бұрын
How do you ink debossing?
@julieveitia2979
5 жыл бұрын
Are any of the new tools usable in the explorer machines?
@cathyh.2054
5 жыл бұрын
No. Maker only.
@julieveitia2979
5 жыл бұрын
Thanks. 😢
@brendalee569
7 ай бұрын
over 2 minutes of ads with no skipping.
@MilesBacon
2 жыл бұрын
I think the title of this video is misleading, there is no embossing in this tutorial, just debossing.
@muffinmayen77
2 жыл бұрын
I thought there’s emboss
@Lena-do1rz
3 жыл бұрын
Can you test out how to do flat debossing on the Cricut as opposed to fine line embossing? CleverSomeday found a trick to do it (kzitem.info/news/bejne/k4mEmJhqnJyWpYo) but wondering if there's a simpler way? Could be a cool thing to test!
@sreihart
3 жыл бұрын
This just confused me. You didn't explain why you were doing the layers and for what purpose. Sorry, but I didn't get anything out of this, in fact, couldn't finish watching it.
Пікірлер: 89