Excellent video Dr. RUST :) also fix up for sure and be cool see when get fix up to plus used it to!
@janbill79
Ай бұрын
Great deal you got on your 1935, makes my 1935 f-20 look like yard art. Of coarse that's all mine is and it was 1/2 the price of yours.
@jasonwhitler4167
11 ай бұрын
Looks like that will be a fun project tractor. The studs are for a PTO powered implement lift. We have one on my grandfathers F-20
@DrRust
11 ай бұрын
I wondered about that I’ve only seen one a couple years ago and couldn’t remember how it attached thanks
@lewiemcneely9143
11 ай бұрын
May even be the cam out but you'll get it. Blamed interesting and GOOD for $500. Blessings
@DrRust
11 ай бұрын
I hadn’t thought about the cam being out of time it can’t anything to crazy because all you have to do is pull it 3 feet and it fires right up and runs
@lewiemcneely9143
11 ай бұрын
But you and me both know you inherit someone else's mistakes if they make them. And you said the other guy had been working on it and you know how that can go. You'll find it, whatever it is.@@DrRust
@stevemccoy8138
11 ай бұрын
Plenty to do, have fun, probably some video out there, to help you out with the timing. Have fun. 😊
@DrRust
11 ай бұрын
I definitely will have fun it’s a requirement
@lomax6620
11 ай бұрын
Been many a kid got a broken arm with those hand start tractors. But theres one thing you wont get on a F20 and thats a speeding ticket lol.
@robskoglund1032
11 ай бұрын
Check your internal magneto timing. It sounds like the rotor is not in time with the armature of the mag.
@DrRust
11 ай бұрын
I hadn’t thought about that yet My next step was to check the points and condenser then possibly the valve lash
@robskoglund1032
11 ай бұрын
@@DrRust I ran into an out of time magneto when the mag died on my F-20 and I swapped it with another one. It was doing the same thing. It would be close but not quite. Being at the steam show when it happened I had to do a tailgate tear down and discovered the problem. I reset the timing correctly and it ran fine from 2003 up to last year when the condenser died and I tore it down and completely redid the mag.
@DrRust
11 ай бұрын
I’ll look at it definitely I didn’t know that was a problem on these
@robskoglund1032
11 ай бұрын
It is if the bearings have excessive wear they can jump time but more likely someone took it apart and put it back together not realizing there are timing marks on the gears. (Some have teeth with bevel edges some have punch marks.) My experience was with the latter and I had to jump the gear ahead two teeth so the timing marks on the tractor would be correct again so it would stop kicking back against the starter.
@DrRust
11 ай бұрын
Ok I’ll check it out thanks a bunch
@jeffmc7946
11 ай бұрын
It may take a while but I'm sure you can get it. Maybe a compression test might show you something.
@DrRust
11 ай бұрын
I might but it’s hard to find a adapter for theses massive pipe thread spark plugs it feels the same on all cylinders as you crank it though I’m probably going to try setting the valve lash next
Пікірлер: 18