Hello, when I call a camera preset it displays for example "recall 2" on screen. Can this be turned off?
@Huddlecamhd
7 ай бұрын
You can turn this off in the cameras OSD menu. Thanks for checking out our Channel! Learn More: huddlecamhd.com/
@Megarobotsquadron
3 жыл бұрын
will this work with my sony evi-D80 pzt camera? It uses the same outputs as this controller
@Huddlecamhd
7 ай бұрын
Hello! The HuddleCamHD HC-JOY-G3 is a versatile PTZ joystick controller that is compatible with a wide range of PTZ cameras that use VISCA, Pelco-D, or Pelco-P protocols for communication. The Sony EVI-D80 is a PTZ camera that typically uses the VISCA protocol for control, which makes it compatible with controllers that support VISCA, such as the HuddleCamHD HC-JOY-G3. To ensure compatibility and proper operation, consider the following: Connection Type: Check the type of connection used for controlling the Sony EVI-D80. It typically requires a RS-232C or RS-422 connection for VISCA control. Ensure that the HC-JOY-G3 has the corresponding output to connect to your camera. Cable Requirements: You will need the appropriate cable to connect the joystick controller to the camera. For the EVI-D80, this would usually be a RS-232C or RS-422 cable, depending on the distance and setup. Configuration: Once connected, you may need to configure both the camera and the joystick controller to ensure they are set to the same communication protocol (VISCA) and baud rate. Testing: After setting up the connection and configuration, test the joystick controller with your camera to ensure that all functions (pan, tilt, zoom, and presets) are working correctly. Firmware Updates: Make sure that both the camera and the joystick controller are updated to their latest firmware versions to ensure maximum compatibility and performance. Consult Manuals: Refer to both the HC-JOY-G3 and Sony EVI-D80 manuals for detailed instructions on connectivity and configuration. Technical Support: If you encounter any issues or are unsure about any steps, don’t hesitate to reach out to the technical support teams of HuddleCamHD or Sony for assistance. In summary, the HuddleCamHD HC-JOY-G3 should work with the Sony EVI-D80 PTZ camera, provided that they are correctly connected and configured to communicate using the VISCA protocol. Thanks for checking out our Channel! Learn More: huddlecamhd.com/
@mohdsofi3563
2 жыл бұрын
To connect the camera to the camera using an 8 pin cascade wire, will only the camera from the Huddle cam brand work ?. If I use a camera from a different model, will it also work? I tried to connect 2 cameras to huddlecamHD, but the two cameras are not connected. Only one camera can be controlled using huddlecamHD What do I need to do so that both cameras can be controlled using huddlecamHD Thank you, I am Mohd Sofi from Malaysia
@Huddlecamhd
2 жыл бұрын
It’s possible that other PTZ cameras can be connected but our support team may only be able to help you with the HuddleCamHD cameras they are familiar with
@mohdsofi3563
2 жыл бұрын
@@Huddlecamhd Or do I need to set communication setup (OSD) first before cameras 1 and 2 can be connected to huddlecamHD ?
@capitalcgaming9966
2 жыл бұрын
Can i power my cameras down from the controller?
@Huddlecamhd
2 жыл бұрын
Hey Capital, you can not power your cameras down with this joystick
@rosspeterson2658
9 ай бұрын
How do I open the OSD menu?
@Huddlecamhd
7 ай бұрын
There is a OSD button on the bottom left hand side of the joystick. Thanks for checking out our Channel! Learn More: huddlecamhd.com/ptz-joystick/
@dejuanjones8948
2 жыл бұрын
How and what does the speed button control?
@PTZOptics
2 жыл бұрын
The speed button controls pan, tilt and zoom speeds
@Huddlecamhd
7 ай бұрын
Thanks for checking out our Channel! Learn More: huddlecamhd.com/ptz-joystick/
@chiesacristovienepesaro4764
2 жыл бұрын
Hola como apagar el audio del jostick gracias
@Huddlecamhd
7 ай бұрын
Hello! The HuddleCamHD HC-JOY-G3 joystick controller is primarily designed for controlling PTZ (Pan, Tilt, Zoom) cameras, and it typically does not handle audio directly. If you are experiencing issues with audio related to the use of the HC-JOY-G3, the audio is likely being managed or transmitted through another component of your setup, such as the camera, a connected computer, or a separate audio system. To address the issue of unwanted audio, you should consider the following steps: Check Camera Settings: If the audio is being picked up by the PTZ camera that the joystick is controlling, you will need to adjust the audio settings on the camera itself. Many PTZ cameras have built-in microphones, and these settings can usually be accessed via the camera's on-screen menu or web interface. Audio Mixer or Software: If your audio is being managed through an audio mixer or broadcasting software (like OBS, vMix, etc.), check there to mute or adjust the audio levels. Ensure that any audio inputs that are not needed are disabled or muted. Examine System Configuration: Review your entire streaming or recording setup to identify where the audio is coming from. Once identified, you can take appropriate action, such as muting the microphone input or adjusting the audio mix. Consult the Manual: Refer to the user manual for the HC-JOY-G3 and your camera for specific instructions on controlling audio settings. The manual may provide insights into how the joystick interacts with the camera's functions, including any audio features. Software/Firmware Updates: Ensure that the firmware for your PTZ camera and any associated software are up to date, as updates can sometimes resolve unexpected issues. Contact Support: If you're unable to resolve the issue, consider reaching out to HuddleCamHD support for assistance. They can provide specific guidance for your model and setup. Remember, the HC-JOY-G3 joystick itself is not typically responsible for audio transmission or control, so the solution will likely involve adjusting settings on the camera or within your audio/video setup. Thanks for checking out our Channel! Learn More: huddlecamhd.com/
@SeunDr
4 жыл бұрын
How do I set a preset from number 10?
@Huddlecamhd
7 ай бұрын
Hello! Setting a preset with a number higher than 9 on the HuddleCamHD HC-JOY-G3 joystick controller involves a slightly different process compared to setting presets 1-9 due to the single-digit buttons. Here’s how you can set a preset for position numbers 10 and above: Position the Camera: First, use the joystick to move the camera to the desired position and focus that you want to save as a preset. Access Preset Setting Mode: Depending on your model, this might involve pressing a specific button or combination of buttons to enter the preset setting mode. Refer to the manual for the exact method for your joystick model. Enter Preset Number: To set a preset with a number higher than 9, you might need to use a combination of button presses. For example, for preset 10, you might need to press '1' followed by '0'. Some models may require you to press an 'Enter' or 'Set' button after the number. Save the Preset: After entering the number, you might need to press a 'Save' or 'Set' button to save the preset. The exact button to press can vary, so refer to the manual for the correct procedure. Confirmation: Some joystick models may provide visual or auditory confirmation that the preset has been saved, such as a beep sound or a light indicator. Repeat for Other Presets: Repeat these steps for each additional preset you want to set. Refer to the Manual: Since the exact procedure can vary slightly depending on the firmware and model, it’s important to consult the user manual for your specific HC-JOY-G3 joystick. The manual will provide detailed instructions tailored to your device. Testing Presets: After setting the presets, test them to ensure they were saved correctly. You can do this by selecting the preset number and observing if the camera moves to the saved position. If you encounter any issues or the above steps don’t seem to apply to your specific joystick model, I recommend contacting HuddleCamHD support for assistance or consulting the product documentation that came with your HC-JOY-G3. Thanks for checking out our Channel! Learn More: huddlecamhd.com/
Пікірлер: 18