"coming at ya from the knife center" needs to include a short cut scene to DCA wildly charging the camera with a box of knives. 👍🔪
@bradmoulton138
2 жыл бұрын
Flipper tab on that SOG looks like the hammer on my 1911
@johnhertzog7647
4 жыл бұрын
I dig the.black stone wash on the bangerang.
@kongandbasses8732
4 жыл бұрын
This black Victorinox is a pretty traditional design. My first knife I ever had was a black Victorinox, back in 1973.
@pauldayton5285
2 жыл бұрын
The Seal XR Flipper is 100% made in the 🇺🇸 USA.
@knifecenter
2 жыл бұрын
It is now, but that wasn't the case when first released.
@charliemartin4392
4 жыл бұрын
That balisong id on point but 220 for stainless handles instead of titanium is like sog charging 170 for plastic ???
@caglesknives2877
4 жыл бұрын
I'm going to go broke watching these videos...keep them coming!
@TheStratman007
4 жыл бұрын
Outstanding!
@TheStratman007
4 жыл бұрын
Me three 🤣
@Killinit33
4 жыл бұрын
How bout that Reactor! Sorry but wtf are you ever going to use a karambit for unless were in an apocolopictal world & have to kill eachother every day?
@degenerateWA
4 жыл бұрын
Why are you guys advertising the SOG SEAL XR as being available but it's still listed as "pre-order"?
@knifecenter
4 жыл бұрын
If we have sold through our stock, that is what that item will default to so that you can still order it and get it shipped out as soon as our next batch arrives.
@papasauce234
4 жыл бұрын
that sog is cool but it is so ridiculously heavy, 8.25 oz for that
@ethanbox2010
4 жыл бұрын
Thank you for pronouncing bowie correctly
@KB-kw8ni
4 жыл бұрын
No G10, aircraft grade aluminum or titanium on a $170 SOG but a cheap GFN handle?! Geez dont do us any favors now SOG
@Nightwolf866
4 жыл бұрын
its kinda awesome...but 50 $ to much....
@3Csavage
4 жыл бұрын
K B actually GRN is a lot tougher than people give it credit for, it also doesn’t wear down as much as g10 does, for the handle design most people would agree especially after feeling how heavy it is that GRN was the best choice for scales
@johnwest4492
4 жыл бұрын
David C. Will they ever mill our the Alox so you can carry the twizzers and toothpick ?
@knifecenter
4 жыл бұрын
Never say never... but I think they never will
@lilrockfromga5092
4 жыл бұрын
I like the SOG, with the flipper opening. Good video
@papasauce234
4 жыл бұрын
Until you release it's 8.25oz
@papasauce234
4 жыл бұрын
photag216 Are you using it in a lightswitch motion or push button? Lightswitch would likely work much better
@papasauce234
4 жыл бұрын
photag216 It's the action of opening it. You use the flipper tab in a lightswitch motion.
@papasauce234
4 жыл бұрын
photag216 You're welcome, it will break in over time and get smoother. If you have issues with the smoothness I'd recommend picking up some knife pivot lube (KPL) off Amazon and applying a couple drops to the pivot
@davidolds4617
3 жыл бұрын
Lots of between the lines good info.
@usernameisusername
4 жыл бұрын
I am not comfortable being tactical with a folder. I like my fingers. Fixed blade is where it's at for stabin.... Uh mean being tactical
@guymahmarian916
4 жыл бұрын
Love the website - just wish you would have a sale on microtech some time.
@michaelrossi3707
4 жыл бұрын
Black on black
@anthonycampos7417
4 жыл бұрын
is the emerson super CQC15 ever going to come back into stock?
@madblank
4 жыл бұрын
@KnifeCenter I'm having a "Error 1020 Access denied" problem for a week now trying to get into the site, where can I mail you to fix this?
@G23-d1y
4 жыл бұрын
Their support email is Support@knifecenter.com
@knifecenter
4 жыл бұрын
We are aware of some technical issues with our site, and our team has been very busy to remedy them. You can email our customer support at support@knifecenter.com, or call us Mon-Fri, 9am to 5pm Eastern Time.
@madblank
4 жыл бұрын
@@knifecenter Thank you!
@michaelxu7132
4 жыл бұрын
Nice video! In your opinion, what is the top heavy duty bushcraft knifes?
@knifecenter
4 жыл бұрын
You can't go wrong with an L.T. Wright: kcoti.com/37U1q7e DCA especially loves their Gen 5 right now.
@SgtKong
4 жыл бұрын
Its a great week for knives!
@preelenede
4 жыл бұрын
I’m a SOG fan and like the first displaying but I’d never pay $170 for a SOG knife....
@oldskoolhoss7534
4 жыл бұрын
The sog looks cool but for $175 no way. it better have micarta or at least g10, not gfn
@ZKawasaki-ny9ju
4 жыл бұрын
Great vid! I Iive vicariously through these vid!
@genoedcknifecollecter1538
4 жыл бұрын
We're is the big knives!
@kinglerxstbtpc
4 жыл бұрын
Another video with great knives that I'm adding to my wish list. Tops, Lionsteel, uuuuggghhhh!!!!
@oddsavage
4 жыл бұрын
Hey, what's up D.C. Anderson? I was gonna go to Knife Center to pick up a new knife fix, but I'm appearently "banned" with a 1015 error? Is this cuz I sent back the Avispa because it was shit made? Or because I traded a Swiza knife for the same knife with a screw driver instead of a cork screw? I'm confused, do you guys want my buisiness or not?
@knifecenter
4 жыл бұрын
We are aware of some technical issues with our site, and our team has been very busy to remedy them. You can email our customer support at support@knifecenter.com, or call us 1-800-338-6799 Mon-Fri, 9am to 5pm Eastern Time.
@305ssmonte5
4 жыл бұрын
Really nice knives. This is the my favorite knife channel.
@W1cked805
4 жыл бұрын
All the peńa knives sold out within minutes 😥
@brenthayworth543
4 жыл бұрын
love it
@The4cp
4 жыл бұрын
Ordering the SOG Friday!
@swcannon80
4 жыл бұрын
No cold steel knives? What the frick!
@knifecenter
4 жыл бұрын
No new Cold Steel models arrived this week
@roundingcorners
4 жыл бұрын
your site services are hokey, i tried searching for spydero knives and get a "webdna service is unavailable"
@knifecenter
4 жыл бұрын
We are aware of the technical issues affecting our site, and our web team is hard at work to resolve them as soon as possible. If you continue to experience issues, feel free to contact our customer service at support@knifecenter.com or call 1-800-338-6799 Monday-Friday 9am to 5pm Eastern Time.
@maulstik
4 жыл бұрын
LMFAO 170$ for a SOG, and 8.25oz at that, lmfao don't.
@alholsbo5934
4 жыл бұрын
Just subscribed...love them knives👍👍🔪
@nasaboy87
4 жыл бұрын
I wonder if Nick Shabazz is going to review the SOG. 🤣
@johndenham9999
4 жыл бұрын
👍
@mealex303
4 жыл бұрын
Price for the sog xr????
@mattmonsees2393
4 жыл бұрын
$170
@nellAyaR2034
4 жыл бұрын
No thanks. Y'all can keep the SOG. Overpriced paper weight
@4God17
4 жыл бұрын
Same. I've never had a good experience with their folders
@natek1993
4 жыл бұрын
I am I'm Love with that Lionsteel M4 Bushcrafter. Probably the best looking fixed blade I've ever seen. 😍😍😍😍😍
Пікірлер: 65