Love these informative videos - much more detail than a typical consumer might want but for a detailing enthusiast it's fascinating and well worth watching
@jt-2286
Жыл бұрын
Great video. Love Gtechniq products and really looking forward to trying Ceramic Wash one day. The music in the video is a bit loud and sometimes takes over the talking, please could the music be lowered slightly, just my hearing is a bit errrrr. Great work guys and great explanations by Lee!
@cholomondeleybiscuitt
Жыл бұрын
Thanks for explaining where the Ceramic GWash fits in; I never knew that it was a final stage product and thought that it was a GWash replacement. I can now modify my 3 bucket routine to suit this new product, as well as using it for my Pre-Car Show rinse off 😊
@michaelleyba5396
2 жыл бұрын
I love this discussion with the chemist! He does a great job explaining technical topics in an easy to understand way. I hope you do more videos with him!
@dashcam2417
9 ай бұрын
I use ceramic g wash in a foam cannon for chassis and wheel arches. It is excellent for the surface. My car is CSL and EXO v4 coated
@Jason-yo8nk
5 ай бұрын
What ratio with the ceramic Gwash you used for the foam cannon?
@dashcam2417
5 ай бұрын
@@Jason-yo8nk 10% ratio , it’s a bit wasteful but does a great job .
@lavautoprotect
2 жыл бұрын
Shampoing top 👍
@vasileiospetropoulos2046
2 жыл бұрын
I want please more video to explain how to. Maintane your ceramic coating how to. Apply them and also the differences between your ceramic coatings? Thanks. Great video. Looking forward for. More informative videos you can contact pan the Organizer and sponsor him to. Do more videos with your products? Thanks! Vas (from Greece) lives in UK
@vasileiospetropoulos2046
2 жыл бұрын
Sounds great!)
@EdwardSiiman
2 ай бұрын
Do you produce a coating for the fender wells, so that road grime, dirt, and rubber filings don't accumulate in the wells?
@GtechniqUK
2 ай бұрын
We have have C4 Trim Restorer for plastic surfaces. For fabric surfaces, you could use Smart Fabric.
@tafl-9198
2 жыл бұрын
Awesome video. Looking forward to trying the new G-Wash V2. Does V2 have better lubricity than V1 ?
@GtechniqUK
2 жыл бұрын
Yes, the V2 has better lubricity.
@tafl-9198
2 жыл бұрын
@@GtechniqUK how good is the long term shelf-life/stability of G-Wash ? Can I expect any issues ?
@GtechniqUK
2 жыл бұрын
@@tafl-9198 If you store it in a cool dry place then you have at least a year - probably more. You only really get issues when the product is exposed to extreme cold or hot temperatures.
@tafl-9198
2 жыл бұрын
@@GtechniqUK OK, when you say cool I assume you mean room temperature (20-30 C) ?
@GtechniqUK
2 жыл бұрын
@@tafl-9198 Anywhere between that range should be OK.
@tanha4446
Жыл бұрын
Can you still use C2V3 as a drying aid after using ceramic G-wash?
@GtechniqUK
Жыл бұрын
You can indeed!
@ColinDyckes
Жыл бұрын
I wish I could make out ALL of the details over the completely unnecessary background music. SO annoying!
@robsmith5914
8 ай бұрын
Agree. A little hard to hear with the background music.
@brendandonegan2150
Жыл бұрын
I have a Model Y (End Q2 2022) with front half PPF and Gtechniq Crystal Serum Ultra Black with 2x Coates EXOv4/Halo. My first three months washing regime, every week or ten days, has been: Autoglym Ph Neutral Snow foam; rinse with Spotless Water; two bucket method washing with Ceramic Wash; final rinse with Spotless water and dry. Now, based on various snippets of advice and rumour, I am concerned that a) I might have overdone by using snow foam and b) that I was wrong to use your Ceramic Wash, which, incidentally, I enjoyed using with its no foam properties. Now, with the Ceramic Wash bottle empty, I have switched to GWash. At last to my questions: Have I, during these first four months of "care" done any harm to my coating or PPF? And, should I now stop the snow foam and use only GWash? Finally, do you recommend any other of your products to enhance or protect the coatings? Thank you for your patience if you have waded through this post.
@GtechniqUK
Жыл бұрын
Hi Brendan, first off your maintenance regime sounds fine and there is no need for concern. Ceramic Gwash leaves behind dirt-repellent properties to make ongoing maintenance quick and easy. Whereas the Gwash is just a very effective car wash with no additional properties. It comes down to personal preference, but Ceramic Gwash is a great product for use during the winter.
@brendandonegan2150
Жыл бұрын
@@GtechniqUK Thank you very much for your swift response and reassurances. On the strength of your advice I have ordered another 500ml of Ceramic Wash and Gtechniq Citrus Snow Foam. Best wishes.
@noelsaw
Жыл бұрын
Can I use this as a quick detailer on a car with CSL and ExoV5? If so, what’s the dilution ratio?
@GtechniqUK
Жыл бұрын
This will not work due to the formulation of the Ceramic Gwash. It will streak if you try to water it down and use it as a detailer.
@mkflack74
6 ай бұрын
The answer you gave Noelsaw I has confused me. I have just put crystal serum light on my car plus eXOV5 and I’m trying to figure out the best shampoo. Is it the regular G3 or is it the ceramic wash that will make my coating. Stay good the longest?
@GtechniqUK
5 ай бұрын
If you are looking for maximum hydrophobic performance then Ceramic GWash would be the best product to go for. I think Noelsaw was asking if you could use the Ceramic GWash as a quick detailer rather than a wash - which is a no. Hope this helps clarify things.
@tishzman
Жыл бұрын
Is GWash fine to be used as the main shampoo to prepare the car for CSL application? Or do you recommend using a purpose built strip wash instead?
@GtechniqUK
Жыл бұрын
We recommend using a thorough decontamination wash process, which would mean that using a good shampoo such as Gwash would be a necessary part of the process. Heres a link to our recent decontamination wash video - kzitem.info/news/bejne/k6hq23V5gJtzaZg
@ado-yz9rb
5 ай бұрын
So....I have just coated my truck w/serum light and was wondering 1) do I use the ceramic G wash as a regular wash and how often to wash...is there such thing as washing too much and 2) how often can I use C2 on the truck ?? dont want to buy too much and go past the open container 1yr exp date
@GtechniqUK
5 ай бұрын
You can indeed use Ceramic GWash and use it as often as you like. There is no such thing as washing too much, but the coating keeps the truck cleaner for longer. In terms of C2, again you can use this as often as you like.
@ARehman11194
Жыл бұрын
I seem to be experiencing streaking with ceramic wash. I’m not sure if I’m doing something wrong or using too much?
@GtechniqUK
Жыл бұрын
Streaking will typically be related to a couple of things. Over application of the product or the panel being too hot. This product needs to be used on a cold surface with cold water.
@nickn7866
Жыл бұрын
Would it make sense to presoak with gwash in a foam cannon, rinse, then hand wash with ceramic gwash? My car is newly coated with CSU/EXO
@BarryCoombs1
9 ай бұрын
Wouldn’t you just use GTQ’s own snow foam instead as that’s what it’s designed to be used as.
@everettekupsche4038
Жыл бұрын
Do you dry the car after the wash!?
@GtechniqUK
Жыл бұрын
Yes, we recommend drying the vehicle after washing it.
@joshuamolina2986
Жыл бұрын
Can you use Ceramic Gwash with C2 ceramic sealant ?
@GtechniqUK
Жыл бұрын
You can indeed, the two are compatible with one another
@stephenmason9751
2 жыл бұрын
Hi, i have XPEL Stealth PPF applied to my car and they have advised not to apply ceramic coatings to the satin PPF as the appearance changes. Do you have any information on this and is the Ceramic GWash ok for XPEL Stealth?
@GtechniqUK
2 жыл бұрын
Ceramic Gwash is suitable for matt or satin paint and PPF finishes.
@ethanphillips447
Жыл бұрын
But what is honestly the purpose of W1 if you just use W3?
@GtechniqUK
Жыл бұрын
If you already use the Ceramic GWash then not much. It is entirely up to the customer. Some customers prefer a wash with no additives and some customers prefer a shampoo which leaves behind hydrophobic protection. There is no right or wrong, It all comes down to personal preference.
@salmanhphotography
Жыл бұрын
Ceramic wash it absolutely rubbish, leaves marks all over the black car, used it 3 times and same rubbish result 3 times until I binned it!
@GtechniqUK
Жыл бұрын
The black marks left on the surface will likely be due to the product being applied in hot temperatures or to hot paint. We always recommend applying this Ceramic product using cold water and on cold paint.
@ASRmann
Жыл бұрын
As above it’s probably because you chose to apply in direct sunlight or allowed to dry for too long. The product is amazing and is my preference over G wash and other similarly priced ceramic shampoos on the market.
Пікірлер: 54