Thanks To Rocky Talkie For Sponsoring This Video rockytalkie.com/discount/TALKWITHGT10?redirect=%2Fpages%2Fradiocomparison Automatic 10% Off When You Add To Cart
@rjg02005
Ай бұрын
CRKT has earned a whole bunch of respect for getting me out of the "gas station" knife world and allowed me to become a more discerning customer. Their M-16 and M-21 designs have served me well over many years. ... but they were just the first step out of that world, and I think they are that first step for many, but I'm not sure how many people with objectively higher-quality knives keep coming back to crkt.
@tacticalcenter8658
Ай бұрын
No matter what, crkt always uses the lowest heat treatment quality.
@gideonstactical
Ай бұрын
For $30 bucks it’s definitely holding its own
@tacticalcenter8658
Ай бұрын
That's also poorly designed, needs the Recaso or finger choil like most other lock backs, that can close one handed.
@tacticalcenter8658
Ай бұрын
$30 is too much for soft 8cr13mov
@charlessalmond7076
Ай бұрын
@@tacticalcenter8658Spyderco Tenacious in 8cr cost more. No one really complains about that.
@escapetherace1943
Ай бұрын
@@tacticalcenter8658 China River Knife & Tool is what I like to call CRKT. Absolute trash blades
@PatHappyDay
Ай бұрын
they remade the lock of the german's "Black Cat k55", dating from...1867; like a few;) years before the famous buck's back-Lock 110:))
@brianweiss9688
Ай бұрын
Lockback one handed operation: 1: Depress lock to disengage blade 2: Press the spine of the blade against your leg to start closing it. 3: move your fingers/hand out of the blades way. 4: Finish closing the blade by continually pressing the spine against your leg until it’s in the fully closed position. My dad has been carrying a Buck 110 for over 40 years and I watched him do this multiple times a day growing up. I grew up carrying the same knife and used the same method for years. It’s cool to see new designs but whether it’s a standard kickback or this new one it’s not hard to do it one handed.
@johndenny3607
Ай бұрын
Don't know anyone putting out so much content on a consistent basis as this guy. I appreciate it.
@gideonstactical
Ай бұрын
Really appreciate the comment!
@tvy-bdx
Ай бұрын
Al Mar used the front lock long ago.
@NMWanderings
Ай бұрын
Right! I've had mine at least 16-18 years. This is nothing new.
@davidlagno7717
Ай бұрын
I like the lock, don't care for the blade design. I don't mind 8c13mov on my Syderco or Kershaw. I've broken tips off D2 and even Magnacut. I hard use my folders at work everyday and it makes me not a steel snob. 154cm is probably my favorite from an old Emerson I carried for 15yrs. 14c28n,s35vn is ok. I really think all these real expensive steels that came out in last 5yrs are all hype. Most of these guys only buy them to collect and play with. In the real world 8cr13mov works. Rusts a lil, wipe it off and sharpen it when it's dull
@unholyabyss
21 күн бұрын
Some CRKT designs I like, but they are REALLY missing on quality checks every time I get something from the brand in recent memory to give them another chance. They need to work on consistent sharpening and don't get me started on my deadbolt M16, pivot screw so thin it stripped with such ease, which is the means in which it locks up and that could fly out any day. CRKT is just slipping up, the spring assist on top of bearings was one of the worst things they've done design wise because the knives without the springs are smooth in action but the detent is explicitly on whether the spring is in or not, so you can't de-assist them.
@anthonyrollins9825
Ай бұрын
as far as folding knives go 8cr13 is a great choice as far as budget steels go it holds its own even against 14c28n they both a edge retention rating of 3 ( main aspect for a folding knife - cutting ) at a much lower price point. even a decent choice for a fixed blade with ok toughness.
@cylentone
Ай бұрын
It seems that the shorter lockbar means you would need more pressure to disengage the lock because of lack of leverage. Is that the case? Living in Germany, I wish manufacturers that have good lockback knives would make a nail-nick or short fuller version as well so we could carry them here. Germany only allows one-hand opening or a lock, but not both in the same knife.
@gideonstactical
Ай бұрын
Not at all, as you so in the the video very easy to disengage the lock bar
@bobmccarney4772
29 күн бұрын
The last 8Cr13MoV I purchased was a Kershaw fixed blade about a year ago. I have no problem with the steel.
@charlescollier7217
Ай бұрын
Thanks for this, Aaron. You always put stuff on the radar that I might not otherwise be aware of, and I really appreciate that, even when I'm not necessarily into the item itself. I like the idea of this more forward lockback. It's similar to some of Cold Steel's Tri-Ad lock knives, but even more forward. As you noted, for it to work well, there has to be redesign of the ricasso or inclusion of a choil so that the blade doesn't become a finger guillotine. I expect they'll get that sorted out in subsequent designs. As for 8Cr...it's been a long time.
@lencycler1
Ай бұрын
A very small amount of Dremel grinding will fix that issue easily. I loved my Viper Turn but it drew blood on me more than once - just a tiny bit of grinding made the knife much safer and enjoyable to use.
@gideonstactical
Ай бұрын
Good tip
@shcmoly
Ай бұрын
Rear, middle, front - a lockback is still a lockback, nothing new. Tenacious 15 years ago when they were $30. New price has totally eclipsed inflation.
@TheTarman
Ай бұрын
This feels like a non-development. Even if bumping the mid-lockback placement up to a top-lockback placement is more comfortable for disengagement, the lack of a safe ricasso really does make this a redundant design. Even at that, mid-lockbacks have never been annoying or uncomfortable to disengage for me, including Tri-Ad Lock knives that had decent lockstick. CRKT is scrounging for basically anything at this point if they’re pretending this is truly innovative
@andyhayward1261
26 күн бұрын
Yeah the Seki city backlocks and the native 5 from spyderco are perfectly easy and comfortable to disengage safely one handed so I don’t know how much this would improve on it. And yeah not having a ricasso or choil to hit your finger on disengagement kinda kills it for me
@dlrmon1
Ай бұрын
As a red blooded American, you know, baseball, apple pie and Chevrolet...lol. 8cr13mov has stuck out one to many times for me and is currently spending time in the penalty box. I think the CRKT Fossil is the only one I still in service. I tend to lean towards the old Cold Steel, Ontario and Kabar’s AUS8 as a minimum. A bit more corrosion resistant...
@maxlvledc
Ай бұрын
I'm with you, really like this.
@drytool
Ай бұрын
The triad lock on my CS Broken Skull is far enough forward to not be awkward.
@gideonstactical
Ай бұрын
Very slicey blade though
@drytool
Ай бұрын
@@gideonstactical That's for sure. I have a back up one too, both in CTS XHP, one of my favorite steels. I do like that thicker area at the spine on the Rocky Tallkie (high sabre?).
@Dynotop1a
Ай бұрын
I think this lock design is actually older than the “mid back lock” that Spyderco popularized and typically uses. I’m not sure why it fell out of favor, but a lot of earlier backlocks from companies like Spyderco, including CRKT and others, were like this. I believe the feature is typical of the old school Al Mar designed knives, who was pretty influential. However, I don’t know the truly original appearance of the anteriorly placed back lock. It may be that some people didn’t like this feature because it could be prone to slightly disengage when used in a hammer grip. For example, I have this happen sometimes with my Spyderco Siren (which is a recent knife that has a pretty forwardly-placed lock). They also recently produced a run of their old “Goddard” model that is similar. I think it’s why Spyderco shifted the lock recess back slightly on their designs and added the “Boye Dent”. Regardless, I love backlocks and these have some potential, even if it just comes down to applying modern methods and wisdom to make an old design relevant again.
@marksaint2936
Ай бұрын
Thanks for a review on an affordable knife.
@darkwater1967
Ай бұрын
Did you try rotating the knife in your hand so that your index finger pushes the lock and the rest are out of the way? Seems like it would work...
@leonsoto8333
Ай бұрын
I have tried to like crkt. Just like everything you get what you pay for. I will say I'll carry a crkt over a spyderco. Just glad to carry benchmade bugout. 😊
@mistersmith3986
Ай бұрын
I've NEVER had a lockback fail on me. I HAVE had Axis Lick, Bar Locks and Liner Locjs fail on me. All doing the same kibd of work. I don't need a fidget knife like these sisdies out here. I need a knife, with a lock I can depend on.
@MrTuffCookies
Ай бұрын
I love back-locks. Kinda went full-circle with them, seeing them as just another lock type and appreciating them for their long traditional knife history, to hating them because I thought they were outdated and obsolete, to then actually preferring them in some instances for their generally robust nature. Caveat, though - I like *mid* back-locks and I generally only like them on bigger knives (a la Endura, Code 4, Recon 1, American Lawman). Small knives (i.e. Delica) seem too fiddly to handle with back-locks and the blades don't generally have enough weight/momentum to confidently carry them through an opening flick compared to bigger knives (generally, not absolutely, of course). I have an idea to (I think) revolutionize back-locks that I'd love to put into a concept and bring to market, but finding the time and resources to do it... psh.
@gideonstactical
Ай бұрын
Sounds awesome! And I would agree axis and lock back are my favorites
@MrTuffCookies
Ай бұрын
@@gideonstactical 100% agree. Especially Tri-Ad locks.
@livinglarge13
Ай бұрын
My only 8cr blade is a Spyderco Bow River wicked good blade easy to shatpi
@joshpulliam
Ай бұрын
My only blades in 8cr13mov are the Spyderco Tenacious and Soyderco Bow River. The Tenacious is my around the house beater knife. The Bow River gets used mostly in the kitchen and cooking when we are camping. With the other super steels out there like S35, M4 and MagnaCut, 8cr just doesn’t make sense for me anymore.
@PerceptionVsReality333
Ай бұрын
Some people are whining about the blade steel but I'm still going to buy the smaller one.
@maxlvledc
Ай бұрын
Imo 8cr13 at $40 is not adequate. Not when I can consistently find K110, Arrpm9, NitroV, 440C, D2(better brands), and 14c28N
@user-wd4ge2zh2c
Ай бұрын
Cold steel has done that for years.
@coryfisher7019
Ай бұрын
Last knife I bought in 8Cr13MoV blade steel was a SRM 9201-PL, love that knife!
@gideonstactical
Ай бұрын
Very nice!!
@sporg919
Ай бұрын
I like the blade shape on these. Very benchmade styled.
@ryansgr8
Ай бұрын
Sandvik,154CM, RWL34 or Nitro V is as low as I would go now on steels. Non starters are xxxCRMOV, D2, 420, AUSx
@CorruptionManX
Ай бұрын
Thank you very much for this video. Just curious, what do you use on your pocket knives to prevent the blade and locking mechanisms from rusting?
@gideonstactical
Ай бұрын
I live in a very dry climate so humidity isn’t something. I’m never really worried about.
@Zerglingdad
Ай бұрын
If you like lock backs, you should try both sizes of the farmhand by bear & son. American made and great old school design.
@John-gu7jq
Ай бұрын
Love your channel. I would love to see a review/comparison between the Helle Nord and the TBS Grizzly Bushcraft Survival Knife - Military Model fixed blade knives.
@gideonstactical
Ай бұрын
I will check it out. Thanks for being a part of the GT crew
@ataleph1
Ай бұрын
Thanks for the video! The idea of the lockback brought forward is not new. Such locks have been existed since the beginning of 20th century, perhaps even earlier. From the modern knives examples would be some EKA knives from Sweden, and there are more
@troyspurling1910
Ай бұрын
It's a cool design. I'll pass until we see more premium materials. I just received my new Michael Walker from CRKT that is made by LionSteel. Love the knife but dealing with CRKT customer service was less than impressive. They spent an extra week of emailing to verify this or that. I thought I was getting punked. When I told them I'd never order from them again, the knife miraculously showed up FedEx.
@stevebantersb
Ай бұрын
I love lock backs due to long lasting lock.
@erichall6627
Ай бұрын
8cr is a no for me. There are better budget steels in the $30 range. I just picked up the Pyrite Light with the controversial RPM 9 for $30. It's a budget knife I will actually carry. I do like the front lock on the CRKT.
@jimathybindlenim6359
Ай бұрын
Of all my folders my opinel no 10 stainless is by far my most used
@fatmangaming2720
Ай бұрын
Buck Spitfire is a lock back and the lock on it is close to the same position .
@ronp4529
Ай бұрын
Like the design and grind, would hope for 14c28n. I just gave away a Kershaw in 8cr that I carried for a long time. These days I prefer better steel, but if the design is good and it's cheap 8cr and aus8 are fine. I'd probably pick the Ka Bar Dozier over this, but it's definitely a cool little knife.
@thomasrobarts2399
Ай бұрын
But i bet the buck has a better heat treat like they always do.
@Chrisdolin
Ай бұрын
Buck had the best…!
@Cid_1
Ай бұрын
8cr is usually a no go for me, but might still just pick one up to check the lock. And hopefully, they make a version in better materials from one of their partners with great production quality like Hogue or something.
@Wyatt_Holiday
Ай бұрын
Cold steel recon 1 has a forward lock and a large recasso
@gideonstactical
Ай бұрын
Sorry, not accurate, it’s actually further back by a little bit then on the voyager and as you saw the video this CRKT is a whole thumbs width forward of the Voyager. Not saying the recon one isn’t awesome because it is.
@8608films
Ай бұрын
Hey Aaron hope all is well if I'm not mistaken The last knife I bought that had 8cr13 was the Spyderco tenacious
@eyeofthetiger4184
Ай бұрын
G'day Aaron, thumbs up for overall design and can't see them losing integrity having a shorter backlock. Personally, I'm happy to trade one handed closing, just to have a backlock, ... though it is easy peasy on the Recon 1 ...... without drawing blood ; ) Last time I bought 8Cr was the CEO, must be 10 years ago. Its ok for the office, though I wouldn't buy it again these days. On a really tight budget, yeah sure ........... as long as you get a decent sharpener to go with it. Incidentally, as far as alphabet soup recipes go, I've found 9Cr18MoV to be significantly, (no ... much), better at holding an edge, I'd be happy enough with that on these and don't think it'd be "much" or indeed, proportionally, more expensive, i.e. bang for buck. Cheers Duke.
@Blakdog333
Ай бұрын
Fox Mojo and Fox ANunnaki and the Boker Yukon....
@hificat101
Ай бұрын
Id consider buying that new 8CR Spyderco Tenacious with blue titanium scales. Other than that, I dont remember when I bought an 8CR knife.
@jcm5399
Ай бұрын
did you adjust the Kith to make it easier to flip open? Mine's vert tight out of the box..
@gideonstactical
Ай бұрын
No that’s the way it came. 👍
@Bayou987
Ай бұрын
Am I the only one who likes the buck clips??
@gideonstactical
Ай бұрын
Probably haha 😂
@Bayou987
Ай бұрын
@@gideonstactical haha!! Yea you’re probably right! they’re ugly but they’re tough which is handy because I use mine at work
@Desertzombies
Ай бұрын
Done with knives I have benchmade spyderco civivi there is always something new that’s expensive as hell what’s wrong with the ones I bought that were reviewed as the best ever now there’s vs videos and every knife review says I need this one more because it’s better I think it’s because they send you gifts to review
@gideonstactical
Ай бұрын
Bought both of these blades
@paulthelefty
Ай бұрын
Ambi lock, no ambi clip… 👀🤷🏻♂️
@The4cp
Ай бұрын
Not a bad idea. I like it.
@shelbyputman8577
Ай бұрын
WHOAH, THEY MOVED IT UP 3 CENTIMETERS??!!!!!!!!!!?!?!?!!!!
@andyhayward1261
26 күн бұрын
lol that’s so stupid in that info sheet you put up, they list ambidextrous as a benefit but then it doesn’t have an ambi clip. That along with 8cr and a dubious improvement over a Seki city mid lock back from spyderco kinda kills it. Oh and the lack of a choil/ricasso to catch your finger takes away from whatever advantage in disengagement this front lock is meant to have.
@clintonlewis1261
Ай бұрын
Wow , cool !
@DanoG-xf7jb
Ай бұрын
Make it D2 or AUS10 and then we'll talk.
@kid5Media
Ай бұрын
Really? I'm looking at my 50 year-old Buck mini and the lockback is at the actual back. Spyderco moved it way forward, this is just a tweak.
@robertbarker5802
Ай бұрын
How is this different than what Al Mar has done for decades now?
@PD-we8vf
Ай бұрын
So what is so innovative about this?
@ghozt9119
Ай бұрын
Test the strength before comparing it to the VOYAGER.
@MrLleyo81
29 күн бұрын
Absolutely HATE lockbacks
@Gloern24
Ай бұрын
Crkt has been doing this for waaaaay to long idk why people still buy from them. They take great designs and make them with shit materials and very questionable qc. 8cr is def a non starter for me at anything above $25
@cletus85
Ай бұрын
Not a new design
@CIGARURI
Ай бұрын
How much are they?
@gideonstactical
Ай бұрын
$29 on dlt link in the bio
@charlessalmond7076
Ай бұрын
Last 8cr blade i bought was a decade ago. Spyderco Tenacious at wally world for like 45 bucks.
@rileycoppicus1128
Ай бұрын
Too bad CRKT always shits the bed with steel.. heat treat, and quality.. literally fall apart after use for years. No lock tight from factory. Cheap hardware ect :( But I hope this mew one is a banger !
@artfisher1615
Ай бұрын
Ambidexterity?
@keepout7811
Ай бұрын
First real gamer!
@graybeardedsheepdog9037
Ай бұрын
8cr...blah, blah is a non starter..... so is D2 for that matter ........ in this day & steel availability 154cm is getting to be my minimum, unless it's a Buck with 420 boss heat treat...
@jaymailloux976
Ай бұрын
👍🏻
@helterskelter156
Ай бұрын
You couldn’t even remove the scales to show what’s “new”, after clickbaiting with this lazy title. My god… mouth breathing KnifeTubers are the worst 🤦🏼♂️
Пікірлер: 111