I just bought the Yamaha RX-v6a. Thank you for the walk thru on the app. It definitely helps me with the setup. You have a new subscriber.
@mchambliss2
5 күн бұрын
@@tfrench4366 thank you 🙏🏾
@polarisflyer
28 күн бұрын
I absolutely LOVE that my Aventage and my two sets of MusicCast (MC) speakers can be linked together to create a whole-house system. However, I find that the MC app is fairly limited, in comparison to what some of the native functions are for each of the music stream services. I am primarily using my MC app to launch into Spotify. Once running, I use the Spotify Connect to move through all of the features of the service, while falling back to MC to control volume or power off.
@hongkeotang2160
2 жыл бұрын
I have Yamaha RX-A6A thanks to your video I got the aura 3-D working 🙏🏻
@LichaelMewis
Жыл бұрын
How do you get Aura 3D to work with thid receiver?
@jaakanshorter
2 жыл бұрын
pure-direct support multiple channel sources. I just tested that Tonight on the A4A that I got over the weekend. LPCM, multichannel LPCM, DD , DTS, DTS MA all work in pure-direct.
@soundisfun2238
2 жыл бұрын
Yamaha A6A thoughts after 7 months. It keeps getting better! Max, I reviewed this MusicCast video again and picked up your tip on using the Surround Decoder in Auto mode. That setting sounds great in my room. Lossless music (Apple TV 4K) fills the room while keeping the speakers transparent. So far, my music plays either in Dolby Atmos or in Dolby Surround. Before using the Auto setting, I would flip between Surround AI, Auto 3D, and Straight. Those are good choices, I prefer DSur best.
@mchambliss2
2 жыл бұрын
The only thing that is missing is VRR and ALLM mode. Hopefully, that will come soon.
@soundisfun2238
2 жыл бұрын
Hi Max! Since all my content is some form of Dolby, I changed my Surround Decoder from Auto to DSur. The result has been quicker switching between DSurr and Atmos. When on Auto my A6A took longer find finally land on DSurr. That switching latency bugged me, so I'm even happier now.
@hongkeotang2160
2 жыл бұрын
Thank you Max! You have done a good job better than a techno dad ♥️
@soundisfun2238
2 жыл бұрын
Very Helpful ! Thanks for the great tip on using the Auto Surround Decoder. Loving the sound from my A6A setup (5.2.4)
@stevemears4137
2 жыл бұрын
Great video! Keep this type of content coming. Even the most basic information and tips are helpful to people like me. Well done!
@mchambliss2
2 жыл бұрын
Thank you
@marksmelter
2 ай бұрын
Hi there I’m thinking of getting this amp just wondering can adjust each speaker volume via the amp
@DonLeonM
2 жыл бұрын
VERY useful and informative, thanks!
@msoles30
2 жыл бұрын
Great tips and I think you should do a rant video maybe Yamaha will some thing after that
@charlesromney
22 күн бұрын
Anyone knows if yamaha will be adding the search option to look for specific track, artist, genre, etc?
@midmassguy
2 жыл бұрын
Thank you MR Max very good love your videos of this wonderful beast, maybe your next video or whenever you can do it would love to see settings in the menu under sound some settings I'm not familiar with. thank you keep up the great work. HAPPY HOLIDAYS.🙏
@mchambliss2
2 жыл бұрын
Yes, I can definitely make a video on that as well. I want to keep making these videos short because the material might get too dry. Yamaha AV Receivers have so many options, which are a gift and a curse at the same time 😁 Yamaha has Way more settings than my Denon 4500H which I think is a positive.
@midmassguy
2 жыл бұрын
@@mchambliss2 I agree on the videos and I tried out the Denon x4700H. didn't like the sound and not enough power with out hooking up external amps. Always been a YAMAHA guy and always will.👍
@mchambliss2
2 жыл бұрын
@@midmassguy I feel the same. On my Denon 450@H in the living room, I had to crank the volume up way too high. When I cranked the volume up, I’ve noticed that the receiver would start to get uncomfortably hot 🥵 I knew I had to try a different receiver.
@midmassguy
2 жыл бұрын
@@mchambliss2 Same here Max the Denon got really hot, didn't like that.
@chantals9301
Ай бұрын
Hello Max, please can you guide me, I just bought a Yamaha RX-A8 and when I go on youtube I see the image but no sounds? Thank you Chantal
@JF-le5nh
21 күн бұрын
Hola Porque me envia a aplicacion musiccast y no a ap yamaha el A8A
@krogers17
2 жыл бұрын
Thx for video. When you flipped to the receiver UI at the 7 minute mark is that still shown on your phone/pad, or is that just seeing wha is on the TV or projector screen from the receiver itself. I've not been able to get those shown on my iPad or iPhone, tho receiver to my TV works fine. I have to admit I find the Yamaha AV Controller clunky and nowhere near the class of the iPad/iPhone of Pioneer from 10 years ago.
@mchambliss2
2 жыл бұрын
I switching from the iPhone to the Projector.
@reviewforthetube6485
2 жыл бұрын
Very nice my friend
@mchambliss2
2 жыл бұрын
Thank you :)
@kev2tube
Жыл бұрын
How do I attach speakers with the Bluetooth transmission?
@JV220
2 жыл бұрын
Thanks, how quickly do commands made through the app take to the receiver? Is it instant? Does the app have any bugs or glitches? Thank you.
@mchambliss2
2 жыл бұрын
It's instant. I haven't discovered any bugs while using the app. I think the app is more responsive than the remote. With the remote, I have to constantly move it in the area where it can receive a signal. With the app, I don't have that problem.
@JV220
2 жыл бұрын
@@mchambliss2 thanks!! Do you know if you can run multiple Aventage AVR's on same app, in same household?
@JV220
2 жыл бұрын
@@mchambliss2 I got mine set up and you are right, the app is super slick 🤙
@ashishk5016
2 жыл бұрын
Got a RX2080 yamaha is there a way to stream youtube music via the music cast app
@davejones538
Жыл бұрын
hello sir do you get gapless play on your music media server ?
@n1kkri
2 жыл бұрын
How do I connect Bluetooth headphones to the RX-679. Bluetooth transmit is not available in the receivers menu. I was told I need to use the MusicCast App to turn on the Bluetooth transmitter. I can't get the MusicApp to connect to the RX-679.
@rockie071
2 жыл бұрын
How did you get to the settings at the 2:00 mark?
@courtneygiesman6005
2 жыл бұрын
Hi! I can get pandora to play on my tv, but it doesn’t display any album artwork. Can anyone help??
@timlemieux5942
Жыл бұрын
How do you do something as simple as changing the hdmi input? That was simple to do on the old AV Controller app but can't see how to do it in MusicCast. It shows me that its using HDMI1 and I can see all the sound settings for that, but no way to change it to HDMI2, HDMI3 etc
@timlemieux5942
Жыл бұрын
Never mind I figured it out. Had to go back one screen!
@mchambliss2
Жыл бұрын
I'm glad you found it 😁
@ryanfuller5
11 ай бұрын
Man if you have this much echo happening just talking, I can't imagine how awful those KEFs (?) sound in that room....
@bearzlla
2 жыл бұрын
I wasn't super happy with the MusicCast app. I'm just streaming Tidal to my Yamaha CX-A5200 with AirPlay2.
@Aragorn62
2 жыл бұрын
It says to hold the connect button but where is it on the RX-A8A?
@mchambliss2
2 жыл бұрын
On your RX-A88, do you have it connected wirelessly or through Ethernet? If it's wirelessly, select add a new device. Once you select add a new device, make sure that the A8A is on. Once it's on, the app should recognize the A8A
@cybernessful
2 жыл бұрын
@@mchambliss2 the questions was "It says to hold the connect button but where is it on the RX-A8A?"
@cybernessful
2 жыл бұрын
There is a sensor-button right below small menu nob, there is writing MENU (CONNECT), you need to touch this writing and hold for 3 sec until display shows CONNECT. Not very intuitive, I know.
@LichaelMewis
Жыл бұрын
Hold small button to the right of the actual receiver for five seconds until it connects.
Пікірлер: 48