I love these Star Trek builds, really takes them to the next level
@HobbieswithJose
2 жыл бұрын
What an EPIC build. Absolutely fantastic to see this process and how the obstacles were overcome. So much to learn and appreciate here. 👍🏼
@OtakuBuilder
2 жыл бұрын
Thank you so much for coming to another KZitem premiere my man🦊💙🖖🏾
@HobbieswithJose
2 жыл бұрын
@@OtakuBuilder Always a pleasure dude. Thank you for the amazing content!
@llmyth007
2 жыл бұрын
What a beautyful ship. The Enterprise Refit and the E are two of my all time favorite starship designs.
@EXTREMESILVERX
Жыл бұрын
350th scale of "enterprise e" maybe some day..... great work 👏👏👏.
@smacks999
Жыл бұрын
I have done 3 of these. I have NEVER been able to glue the dang nacelle grilles straight. I end up wth grilled spaghetti. I was all set to see how you were going to do it... but you skipped over HOW you did it, just showed the excellent result. The last one I gave up and actually made up decals with the grille pattern and applied them to the nacelle tops. Works okay, but not sure about longevity (they have been sealed with clear coat). Great build as always!
@mikegomintong8856
2 жыл бұрын
Just got my MG Virtue Gundam today, and can't wait to see on how you'll build yours....
@israelislaromero4079
Жыл бұрын
A awesome and great build! Nicely done!
@The-Story-Assassin
2 жыл бұрын
I’ve never really liked this version of the Enterprise until now! You made me love it. You turned a static model into a hero ship!
@johnnelson1446
Жыл бұрын
That was a great job. I do mine as static "Ready Room" model, I was never good at lights. Truly resistance IS Futile! As I have either blown the lights or melted the model. My model has the extra decal set from Aztec Dummy. And she was Named USS Angelfire NCC-75025 (based on the SFI chaper of the same name in Phoenix, AZ).
@OldManTheseDays
Жыл бұрын
This looks fabulous!
@smacks999
Жыл бұрын
As an addendum to my previous remark- I noticed in your beauty shots at the end that the nacelle grilles have separated from the plastic and are all wavy. So we are not alone.😧
@stevenloube6784
9 ай бұрын
Fantastic job!
@sorenzx1923
Жыл бұрын
Great build!! I realy enjoy your videos Otaku! If you are looking for a little bit of a decal hack, i stumbled upon this one not too long ago and it really sped up my decal game. Instead of using a bowl of water, use a wet pallet. Put the decals you will need onto the wet pallet (without the parchment) and they won't over saturate and float off the backing. Great for builds with alot of small decals or escape pods :P Please keep the videos coming!
@splinterrad1963
Жыл бұрын
awsome. Made me like this ship.
@stevengrant3219
2 жыл бұрын
Man, I wish star trek models just weren't so hard to come by. There's a 1:350 TOS enterprise 50th anniversary edition by polar lights at one of my local comic shops just tucked up on a top shelf in the back corner of the store that i'm contemplating getting, especially since he only has it priced at 150.
@camptube7621
2 жыл бұрын
Love the glowing engines.
@onixfieroandscalemodelworks
2 жыл бұрын
Beautiful build. I agree with you about switching things up and trying new things. On my channel I usually build cars but my last build of last year and the first of this year were gundams. I tried whole new ways of doing things and painting, I loved it. I’m going to be expanding my subject matter more often.
@dragonsystems5973
2 жыл бұрын
You just needed one more thing... at the very end, right as you where fading out, Spock whispering "space, the final frontier..."
@stevethefishdotnet
2 жыл бұрын
I've never come across your channel before, but it came recommended by a friend of mine who is a Hollywood prop maker. Good build.
@israelislaromero4079
2 жыл бұрын
Great job, but next time look after COB LED STRIP! That’s a led strip where the LED’s are covered with a “colored” silicone and prevents a bit the problems with hot-spots! Also make the strip in the nacelles a inch larger,so you can cover the whole nacelle cap… base color and build is AWESOME! Thanks for the tips and tricks!
@quipirrin4947
2 жыл бұрын
Awesome video, awesome channel, awesome builder, you are one of my favorite model kit channels please keep going !!!
@markkirk7305
2 жыл бұрын
Thanks for this one Patlabor and enterprise are on my list to build eventually
@SovereignKnight74
Ай бұрын
Wow!
@user-lynKx
2 жыл бұрын
Absolutely ecstatic for this build!
@chpunisher2005
2 жыл бұрын
Great job with the custom lighting! It's been a LONG time since I built a model kit (probably sometime in the 1990s), but I had to laugh when you said the fun part was beginning with the water slide decals. I remember feeling like the decal step was the worst part for me. Some of the larger ones weren't too bad, but I probably wrecked/lost about 60% of the little ones if not more! II can't remember what brand it was but there were a few kits that had straight glued decals and they were easier to apply for me, but they weren't too strong and the small ones fell off. I didn't know about adding a clear coating to protect models back then, but I suspect that might have helped. I'm currently in the process of renovating a room to be a display/gaming/maker room and once it's done I plan to start building models again and videos like this help motivate me.
@ProphetofBauu
2 жыл бұрын
This is amazing! I would love to see the Enterprise D in the future!
@CushionRide
2 жыл бұрын
i actually aquired the bandai version from a friend, the detail was amazing and the built in lighting kit was excelent
@a7xcss
9 ай бұрын
The two Warp Drive Engine Nacelles of the Enterprise-E should have been designed with double the size. In my humble opinion, their current disproportionately small size imparts a general sense of weakness to the ship's appearance, which seems at odds with its supposed war and speed capabilities.
@MetalmanX
2 жыл бұрын
Fantastic work!!!
@vernondelacruz7812
2 жыл бұрын
Bro you did a nice job as always. A little subjestion why not use the extra parts from the second kit and the failed parts to make crashed diorma. That would look really sick.
@boombasett6038
2 жыл бұрын
I can never have the patience to build any model.
@JJModelMaking
Жыл бұрын
Very impressive! Quick question though, with all those Pico LEDs at 3 volts, what do you use as a power supply? A usb charger?
@OtakuBuilder
Жыл бұрын
I use a 3 volt USB power supply.
@thinhnguyenduy4099
2 жыл бұрын
Im exited for this
@ZeroFilth
Жыл бұрын
Was that Star Citizen music playing in the background by the end? If so, great choice.
@rosembergarias50
2 жыл бұрын
Take my money.... I need at least 4 of them but diff classes of course.
@masteryoma5350
2 жыл бұрын
Well another great build but you really should looking into LED filaments for long places instead of many LED lights
@stormmartin57
2 жыл бұрын
same i just bought and the light set .. along with the galileo ( still looking for any extras on that )
@Bonez621
2 жыл бұрын
Absolutely gorgeous work! Always love watching your vids! I've been building for quite a few years now (mainly gundam and scifi kits) and I've always wanted to get into putting led's in my work, but I'm so intimidated in the wiring/powering part of it. Are there any beginner friendly vids you could point me to on your technique?
@bascodelagamma
6 ай бұрын
👍
@GermanNightmare1976
5 ай бұрын
Please tell me, did you install a different cable for the strobe lights on the backs of the warp nacelles? Did I miss the cable pulling while assembling the pylons? (I only saw the red/black twisted cable for the engine lights). How'd you do it? Turned out great and thanks for sharing.
@OtakuBuilder
3 ай бұрын
To answer your question no. The strobes are all on one circuit. But the limit is only four
@p.j.c.2.0
2 жыл бұрын
Oh I forgot to ask what kind of Glue are you using to put your Models together ?
@dases1
2 жыл бұрын
Awesome build as always, do you happen to have a link to the hand drill you used?
@leestuart2653
Жыл бұрын
I found water slide decals but the background was white instead of clear. Please help it looks awful. Do you have a reputable seller for me to buy the right ones from?
@chuckintexas
11 ай бұрын
👍❤👍!
@pantheraerospace752
Жыл бұрын
I built this model before, and it didn't come out well due to bad decaling skills
@senying
2 жыл бұрын
How can I help i am not living it the country of USA ToT
@wakurenai482
2 жыл бұрын
I have watched this channel a year, For the footage, I thing you put in too long for the color spray, It's so boring, I will jump many times to see any special things. Also I thing you should show longer for your final result, Like this episode you just show me around 1:20 for your final result, It just less then 10% for this episode, We can't see a lot details like colors, LED light, somebody details, weapon details etc. Wish can improve you for the channel and keep going, I very enjoy to watching you how to design Led light for the kit.
Пікірлер: 55