I've looked at alot of videos and u have helped me a lot more than all of them together thank u
@i2edeye
9 күн бұрын
Glad to help
@SuperRandombob
Жыл бұрын
Dude you actually really helped me. I ended up having my rod backwards cuz I couldn't see my timing marks on my custom install on a Datsun roadster. You help me tremendously. I ended up having the rod backwards which caused four 4321 firing order instead of one two three four. So I just switched out around the plugs and now I'm running.
@i2edeye
Жыл бұрын
Glad to help. Nice solution :D
@AndrewBaker-xt3dv
Ай бұрын
Love this. Getting ready to overhaul mine
@i2edeye
Ай бұрын
Thank you. I just picked up my dual cam from the machine shop :)
@billbirch3748
Жыл бұрын
The factory is not going to guess and stab. I was wondering what their trick was to get it timed without getting frustrated? Index marks. Thanks for sharing. This is helpful.
@i2edeye
Жыл бұрын
Glad to help
@KudosBlaine
7 ай бұрын
Appreciate the video, in the middle of a timing chain job on my 97. Replacing oil n wtr pump and all seals. Also putting a ratcheting tension on. Thanks again!
@i2edeye
7 ай бұрын
Glad to help. Wish I had known about the ratcheting tensioner before I put my last one together. Next time I will be upgrading.
@HookdFanatikz670
2 жыл бұрын
My bro thank you for the video that will surely help me out and others as well. Keep up the great content and God bless
@i2edeye
2 жыл бұрын
Glad to help. :)
@gabberpietor
Жыл бұрын
thank you. replaced my head, timing chain, and the sprockets on the head and crank. was having trouble timing my engine. video was a life saver. thank you again
@i2edeye
Жыл бұрын
Glad to help.
@BoostedPastime
6 ай бұрын
Thank you very much!
@i2edeye
6 ай бұрын
Glad to help.
@marwansuliman5487
Жыл бұрын
Thank you it's helped me 🙏🤝
@i2edeye
Жыл бұрын
Glad to help. :)
@szamitogepszolgalat
8 ай бұрын
THX!!! It was very useful!
@i2edeye
8 ай бұрын
Glad to help
@tatesack
Жыл бұрын
Great video
@i2edeye
Жыл бұрын
Thank you
@clementracing
7 ай бұрын
Lifesaver, bro
@i2edeye
7 ай бұрын
Glad it helped.
@DickGazInYa
Жыл бұрын
I've rebuilt and pulled the oil pump on so many KA-E's I've lost count. The drive gear is so easy to misalign it's pretty much a gamble. If its on a stand it's not too bad, but in the car going in at a 45 degree angle while trying to keep the shaft aligned with the oil pump dimple is literally just a guess. Once you've done it a few times, you'll know right away looking through the distributor hole if it's off a tooth. The good news is, misaligning it will not hurt anything, it just won't start or run rough.
@i2edeye
Жыл бұрын
Yep. The L-Series is the same. If the timing isn't setting correctly, this is usually the reason.
@adeelautosworkshop373
Жыл бұрын
Very nice
@i2edeye
Жыл бұрын
Thank you
@toddpeters9007
10 ай бұрын
Good info thanks
@i2edeye
10 ай бұрын
Happy to help :)
@martinbliznakov64
Жыл бұрын
Amazing
@i2edeye
Жыл бұрын
Thank you
@niloamg
Жыл бұрын
Sure helped!
@i2edeye
Жыл бұрын
Glad to hear it :)
@goat_horde
Жыл бұрын
I found that doing this when the engine is still in the car to be difficult. The crank gears move the tdc mark off a tooth and the timing is not correct. Maybe if i push it in a slight angle so the tooth on the gear realign correctly?
@i2edeye
Жыл бұрын
I show this in my latest video, it can be a hassle. if you find it keeps clocking a tooth on install, try pre-clocking it.
@goat_horde
Жыл бұрын
@@i2edeye im going to give it another try. It ran for a few weeks and started to backfire out the intake. Maybe bad valves too but i know the timing wasnt 100% confident on
@i2edeye
Жыл бұрын
@@goat_horde Checking the clocking of the drive tab. You can see it in the title screen pic on the 521 timing vid. The KA and L Series are pretty much the same.
@WhoopAzzRacing
2 жыл бұрын
Yeah man🎂
@andygonzalez6801
9 ай бұрын
Verify that engine is time but its off on the distributor since the rotor is facing the 3rd firing point on tdc i wanna say its 90° off is my only option ? to take off the oil pump and line up like or is there way i can without
@i2edeye
9 ай бұрын
If it is exactly 90 you can move the #1 spark plug to the #3 spot on the cap and reorder the other spark plug wires accordingly. Not ideal but doable. You could in theory put a slotted plate at the base of the distributor that allows almost infinite adjustability also. The issue arises if you are off a lot, you can damage valves and pistons or backfire hard enough to blow up a muffler. You want to be sure you are set to 12deg btdc (KA Ignition Timing) at the distributor before starting the engine.
@saintpeterson5275
Жыл бұрын
Is it possible to destroy or make the oil pump inefficient by rotating the distributor to make timing adjustments?
@i2edeye
Жыл бұрын
No. The interface between the pump drive and distributor drive doesn't move when you turn the distributor housing.
@shareefsha7439
Жыл бұрын
Gud.job
@i2edeye
Жыл бұрын
Thank you
@Nimbus.
2 жыл бұрын
holy fucking shit i think the oil pump shaft was off a tooth on mine making it not run unless advanced passed the point of adjustment
@i2edeye
Жыл бұрын
It's easy to bump the drive gear and get it a tooth off during installation. The 521 I am cleaning up has the same thing going on.
@Nimbus.
Жыл бұрын
@@i2edeye yea its a pain in the ass, i gotta rip it out tomo
@i2edeye
Жыл бұрын
@@Nimbus. Good luck :)
@Nimbus.
Жыл бұрын
@@i2edeye thank you, its a nightmare in this 105 degree heat
@i2edeye
Жыл бұрын
@@Nimbus. Drink lots of water
@eliuarona
Жыл бұрын
Can I tite the timing cover with. the oil. pump
@eliuarona
Жыл бұрын
Can you tite the oil pump and distrubtor with the timing cover please
@i2edeye
Жыл бұрын
@@eliuarona You want to install and tighten the timing chain cover before installing the oil pump
@NightKnight1776
Жыл бұрын
I have tried everything and lined it up 100 times and still cant get it to start... I did not mess with the chain just the guides and after installing i got no oil pressure (i solved that) now i cant get timing right even when everything is TDC and lined up as it should be.
@i2edeye
Жыл бұрын
Are you able to verify cam timing to the crank? If so, you should be able to set the static timing (not running) with no bolts in the distributor to see how far off you are on the drive spindle.
@NightKnight1776
Жыл бұрын
@@i2edeye so pull the valve cover off and verify i have tdc on piston 1 with exhaust lobe to the lower right and intake lobes to the lower left and the chain marks line up? if all this is correct im not sure why it wont go back to original timing.
@i2edeye
Жыл бұрын
@@NightKnight1776 the oil pump and drive spindle can go in any which way. Is the rotor pointing at the number one plug wire?
@NightKnight1776
Жыл бұрын
@@i2edeye yes it points to bottom right every time. also in the video you say the oil pump spindle must be lined up with the dot and which it is upon install and the half moon points exactly how you have it in the video yet it still refuses to start.
@i2edeye
Жыл бұрын
@@NightKnight1776 Sounds like you have another issue. Are you getting power to the positive side of the coil with the ignition on?
@fhitoracin8645
Жыл бұрын
I was finn make the video how to do it. Because I went through hell nd hot water😂
Пікірлер: 72