Idk what the context is. But that's a hell of a hammer.
@TheCoalDragonForge
Жыл бұрын
The context was a guy told me his uncle swings a 8 pound hammer one handed all day. Then shows me a video of his uncle straightening circular saw blades cold. The rebound let him use the heavy hammer easy.
@_BLANK_BLANK
Жыл бұрын
@@TheCoalDragonForge oh ok. Makes sense.
@RamboOnYaMom
Жыл бұрын
@@TheCoalDragonForge seems like you’re pretty emotional over that one comment
@princetulip8270
Жыл бұрын
@@TheCoalDragonForge bros uncle is a dwarf
@matthewedwards6454
Жыл бұрын
@@RamboOnYaMom seems to me he found a point to educate. I have watched hundreds of forging clips, and this has never been brought up before. And as I have never hit an anvil I had no idea. So you may take it as him getting "emotional " when in reality he may have found a moment to educate.
@ouzounicus6126
8 ай бұрын
He looks like hes preparing for a viking raid
@legendary_azil1238
6 ай бұрын
😂😂
@heisenburger-wj9zt
6 ай бұрын
If he took of the shirt and became older, he'd become a legendary blacksmith that hides in mountains
@jimmyc9095
5 ай бұрын
Isnt it not rebounding because the fact that the rod moves dissipate the kinetic energy as the andvil is stable so it sends it back? Like if you hit a red hot anvil it should bounce the same as a cold anvil? Because you can see the rod bounce instead of your hammer like if its the rod that receive the energy
@masonmp1889
5 ай бұрын
@@jimmyc9095 since the red hot anvil would be way softer it would just deform the anvil getting rid of the rebound an anvil has to be at least as solid as iron to really work effectivly
@emmanuelmadla9921
4 ай бұрын
"Looks like a midevil warrior"
@jardel_lucca
8 ай бұрын
HR: We concluded your hearing loss is not related to your work activities.
@boooster101
4 ай бұрын
"What?"
@lemonlord6965
4 ай бұрын
“This is unacceptable, how can I be on the council and not be a Jedi master?!”
@scr3aming3agle83
4 ай бұрын
Based medics in the military
@mr.voidroy6869
4 ай бұрын
Most blacksmiths are self employed.
@L-Coder
4 ай бұрын
He has got natural genetic ear protection
@tenibrosity3425
Жыл бұрын
“I hope that cleared things up” sounded personal asf
@zeroxdaknightz3276
Жыл бұрын
He has personal asshats in his comment section like every other person that does videos most likely
@orinbrim7019
Жыл бұрын
30 minutes before this he got in a screaming match with his friend who claimed there isn’t any difference between cold and hot steel.
@Aaron-ic3em
Жыл бұрын
lol it’s some guy he was arguing with i saw another video like about a week ago come across my feed the guy said why he doesn’t use the 12 pound hammer all the time and that he could swing it with ease or something like that
@zeroxdaknightz3276
Жыл бұрын
@@Aaron-ic3em oooh sorry this was the first short I saw from this smith
@OsirisT
Жыл бұрын
"Ya got that? y'understand now you lil shits?"
@sirsesamesalad
11 ай бұрын
“Whys one of your arms bigger then the other?” “I was pounding my hot steel last night”
@akeemt149
11 ай бұрын
😂😂😂
@commiecomrade2644
11 ай бұрын
Than** not "bigger then" ya dingus
@demeter-the-great
11 ай бұрын
@@commiecomrade2644gottem bro. He’s not coming back after that one. They’re is just no way someone with there lack of grammer can understand what champions like us can do. Their, I said it.
@MiroslawHorbal
11 ай бұрын
@@demeter-the-greati think you mean they're
@demeter-the-great
11 ай бұрын
@@MiroslawHorbal thanks, I meant to say “They’re. I said it.” You’re a real one for pointing out my error, I appreciate it.
@user-mx8yk2re8q
8 ай бұрын
somehow my man matches everything I expected what a blacksmith will look like💀
@steven401ytx
7 ай бұрын
Is he your man?
@arronjerden915
7 ай бұрын
He needs golden eyes.
@user-mx8yk2re8q
7 ай бұрын
@@steven401ytx i mean like this pal type of my man not MY man ok?
@steven401ytx
7 ай бұрын
@@user-mx8yk2re8q Yea I was just being a dick
@fantstic16
5 ай бұрын
Idk if im colorblind or not but he looks like a whitesmith to me
@Googeldybunkz
4 ай бұрын
It's insane how strong medieval smiths were to constantly forge swords and armors for armies.
@ThePizzaGoblin
2 ай бұрын
To be fair, the really heavy work, stuff a modern smith might do with a power hammer, was done by 2 or 3 young apprentices with sledgehammers
@proofostrich9061
2 ай бұрын
@@ThePizzaGoblinAnd later into the medieval period there were automated hammers powered by water mills to do the less detailed hammering.
@montagne4976
Жыл бұрын
This the blacksmith in every videogame. He's got the whole set with beard and everything.
@1800ItsLit
11 ай бұрын
Prithee, be careful… don’t want to see my work squandered…
@n1ghtmar3x28
11 ай бұрын
He got the dwarf build legitemetely
@jacksonburch487
11 ай бұрын
He looks like the guy from Thor when they make thors new hammer
@MagnificentMenace
11 ай бұрын
@@1800ItsLityes.
@silentxwxlf
11 ай бұрын
@@1800ItsLitcant forget the the ominous laughter… heh heh heh
@ferreusursus6120
Жыл бұрын
this just cleared up why blacksmiths sometimes strike the anvil between strikes on the heated metal, to keep rhythm while resting their arm
@SeanSnow64
Жыл бұрын
Had the same epiphany
@zanarkandace6821
Жыл бұрын
When he explained it in that context, it made so much sense. Dig it
@zackwatson2539
Жыл бұрын
Wish I scrolled down to here before I said the same thing because I thought he had a problem with the hammer size then it all kinda clicked when I saw him rebound and do a hit.
@jimmyjohnjuan
Жыл бұрын
maybe I thought it was to remove any debris
@faerhazar939
Жыл бұрын
Heyo! One of my friends is a blacksmith, and he & his buddies do it as a way to make sure they're holding the hammer the right way.
@shahidkhan-uq9mm
5 ай бұрын
KZitem shorts doesn’t have a lot of good videos but once in a while you find gems like these. It’s so awesome watching masters do their craft.
@TheNightmareTroll
9 ай бұрын
so youtube decided i’ll become a blacksmith
@ethanjavier6455
11 ай бұрын
Those blacksmiths in movies lookin a lot stronger now
@followhim.8543
11 ай бұрын
If you died TODAY, where would you be spending eternity? Have all your sins been forgiven or are you still hoping that you're a good enough person to earn a spot in heaven. The reality is that no one can earn a spot, our sin disqualifies us. But the God news is that Jesus paid for our qualification by dying on our behalf taking the punishment that we deserved. JESUS said, "For God so loved the world, that He gave His one and only Son; that WHOEVER believes in Him should not perish, but have everlasting life." - John 3:16 Nothing is more important than your eternal destination. Please, don't say, "When I get older I'll get right with God' or 'I'll get serious with Jesus one day when I'm ready.' Don't wait any longer, today is the day of salvation. Get right with God today, for tomorrow very well might be too late. We invite you to REPENT and accept that Jesus Christ is Lord of your life by praying this simple prayer out loud right now... 'Heavenly Father, I turn away from my old life and repent for my sins. I believe that Jesus came for me, that Jesus died for me and that Jesus rose again for me so that I can be forgiven and receive eternal life. I believe in my heart and confess with my mouth that Jesus Christ is the Lord of my life from this day. Through Him and in His Name, receive the gift of eternal life. I ask you to fill me with the Holy Spirit and lead me for the rest of my life. In Jesus name - Amen. 😊
@BolaiMoon
11 ай бұрын
@@followhim.8543 Nowhere. I'd be dead.
@shawn_1120
11 ай бұрын
@@BolaiMoonreal
@amgadpro
11 ай бұрын
@@followhim.8543what if a muslim reads this?
@StonePilled
11 ай бұрын
@@amgadproI don’t read it. I’ll let this king worshipper go about his day, letting a man who molests children claim to speak God’s word. Letting mega churches collect such untaxed wealth. I don’t need to say anything, do anything. I just need to observe and laugh
@portalcrusher5908
11 ай бұрын
And that's why blacksmiths have the most jacked forearms.
@TheTomsdrc
11 ай бұрын
And osteoarthritis.
@mixedmartialnutrition1746
11 ай бұрын
@@TheTomsdrc that's cause you're vegan
@amauricarroll315
11 ай бұрын
They're just heavy metal drummers essentially(I KNOW it's a mid joke, I've just thought of it and had to say it)
@TheTomsdrc
11 ай бұрын
@@mixedmartialnutrition1746 Yeah okay, clearly we have a blacksmith here.
@psychedeli_
10 ай бұрын
And armwrestlers
@michaelst9575
5 ай бұрын
Thats why smiths strong af
@HarryPotter-uv8yp
2 ай бұрын
That’s honestly fascinating. I’m always looking for little tidbits, facts and anecdotes to work into my stories. I’m grateful to you for adding one more.
@jordisimon9802
11 ай бұрын
That's because the hot one absorves all the energy to deform itself, the cold one just transmits it back to the hammer.
@wrestlingkid10
11 ай бұрын
that's why you should hit one in the anvil and one in the metal you're working
@vinvin_2lit
11 ай бұрын
Ohhh because it’s more malleable?
@suggondees4882
11 ай бұрын
@@vinvin_2lityeah cause like the guy said it absorbs the impact and thus taking away all momentum
@vitoschiraldi9762
11 ай бұрын
@@wrestlingkid10hitting one on the target and one on the anvil does not reduce the work needed to raise it back to operating height: that is going to be the same. BUT it allows you to spread the work over a longer (total) travel distance, thus requiring a lesser force. It's basically a leverage
@BPFACTS88
11 ай бұрын
thanks captain obvious
@HellGatyr
11 ай бұрын
That's why blacksmith always the respected NPC
@psilocycho2761
8 ай бұрын
All blacksmiths in game of thrones were respected aswell 😂 how could anyone disrespect people that work so hard in such conditions, it just doesnt happen
@minusSoahc
7 ай бұрын
not in stardew valley
@franciscoprado1836
7 ай бұрын
@@minusSoahci actually like clint
@enriquediaz3336
6 ай бұрын
Not me killing Andrei by accident in dark souls😢
@soumickghosh9852
6 ай бұрын
Andre,Hewg
@BunkerSquirrel
11 ай бұрын
It’s because you’re doing more work on the hot steel than the cold anvil. Because the anvil doesn’t deform, more energy is returned to the hammer providing an upward force (some energy is lost to heat and sound but not a lot). With the hot steel, the hammer doesn’t rebound as much because more of the kinetic energy is lost to the workpiece in the form of plastic deformation.
@johns9543
8 ай бұрын
now that's an intelligent answer
@captainzork6109
8 ай бұрын
That actually the kind of clearing things up I was looking for!
@Whizzo
8 ай бұрын
Plus as the work piece is moving, some kinetic energy is also lost into it
@lubrew5862
8 ай бұрын
I was going to give a very similar answer. But then I thought no. This guy and his audience seem more like they just understand… cold going bouncy bouncy and hot not so bouncy bouncy.
@Terrible_name
7 ай бұрын
or elastic deformation. Or non deformative movement. This would work the same way hitting a pillow or a pile of sand. It's a softer material. It absorbs impact.
@HungPham-jn8ch
4 ай бұрын
If my blacksmith doesnt look exactly like you, I won’t trust him
@mokajones74
Жыл бұрын
My God this perspective makes the Giant Blacksmith's technique from Dark Souls so much more impressive.
@s0nw0lf15
Жыл бұрын
ESPECIALLY THE MULTIPLE LITTLE TAPS THE GIANT DID
@AndrewKidd14145
Жыл бұрын
Andre was the best
@mokajones74
Жыл бұрын
@@s0nw0lf15 riiiiiiiiiiight!? The *wrist control*
@Codkilla896
Жыл бұрын
Best comment
@TurinTuramber
Жыл бұрын
Reminds me that on my first playthrough I accidentally aggro'd said Blacksmith and had to kill him. Was a pain in the ass not having him there but I did get a dope hammer.
@niabiii
Жыл бұрын
I'm a frail 22 y/o woman but watching these videos makes me want to be a blacksmith so bad, I've always thought it's so cool
@Jack_Woods
Жыл бұрын
I relate heavily to this, as a slim 21 y/o man who works in the fastfood industry but wishes to craft powerful weapons and use my hands to shape, destroy and put together things
@gaborfabian1239
Жыл бұрын
@niabi2321 If you have a place for a workshop just start it. Start small, 40 pound anvil (or even a big chunk of scrap steel will do), half pounder hammer, quarter inch bar stock, and a simple coal forge is all you need to start. The quarter inch bar stock is your raw material, you can make bbq grill utensils with a few simple steps. It will be fun.
@mateo10734
Жыл бұрын
Go look at forged in fire I’ve seen many “frail” looking blacksmiths. You can do it just might take a couple more hammers than a big dude
@Bangalangs
Жыл бұрын
They make treadle and power hammers for a reason.
@shadowcard6923
Жыл бұрын
Treadle hammer or smaller hammers, you’ll build up as you go
@jordangriffith307
10 ай бұрын
Seen this exact video 30 times ill never skip it.
@aneaglesnest
8 ай бұрын
This is truly fascinating to me. I’ve always wondered how a smith knew when the metal was too cold to work anymore.
@gaskamp2
8 ай бұрын
Very basically, if it stops glowing you need to heat it up again. You can still work it a little after that, but it's a lot easier when it's red hot.
@rootbeer666
8 ай бұрын
If it gets cold you are slacking. You're supposed to keep putting energy in with your strikes!
@jablosounds
11 ай бұрын
this gives me so much more respect for them dudes that be in infinite weapon making loops in video games
@THUMBLNTHRUBLUES
11 ай бұрын
Them mf are terminators no fatigue
@matchington1148
11 ай бұрын
I don’t claim to be the best blacksmith in Whiterun. Eorland Graymane’s got that honor. Man’s steel is legendary. All I ask is a fair chance.
@patrickgannaway8751
11 ай бұрын
@@THUMBLNTHRUBLUESput all their skill points into stamina
@SDSypher
10 ай бұрын
They dudes pause mid swings too
@pearl_the_raccoon_5805
10 ай бұрын
Have you heard of the high elfs?
@cavemanvi
Жыл бұрын
Your whole existence changed from when that guy commented your hammer was small 🤣
@PolishedMobileDetailing503
Жыл бұрын
5-6 videos deep on why use small hammer. Love it.
@poriccrompton
Жыл бұрын
Cavemanvi linkkkkk????
@wh1tew0lfalpha
Жыл бұрын
😂😂😂😂😂
@wh1tew0lfalpha
Жыл бұрын
I watched this 8 months ago and I specifically remembered this guy gettin pissed off someone uses a bigger hammer than him. Here I am 8 months later still laughing
@MuayThaiSabaiSabai
8 ай бұрын
He looks so happy while showing the difference.
@darkdestroyer4228
7 ай бұрын
I think it's because showing to other the job we do is always enjoyable if we like what we do.
@Rurik_Luci
Жыл бұрын
This man has dedicated his life to his vendetta against large hammers And it's very entertaining to watch Edits: God, I love the autism below. I FOUND MY PEOPLE!
@betafishjeremy7454
Жыл бұрын
More so a vendetta against stupid people who think you can use a hammer that big
@Rurik_Luci
Жыл бұрын
@@betafishjeremy7454 I mean your statement is open to being situational. There are guys who work in rail crews where their main job is swinging a 16lb hammer. I mean they are only going to swing it for maybe 3 hours out of a 12-hour day and they're going to be using both arms but they are using a 16lb hammer for their job.
@MichaelMorris1991
Жыл бұрын
This has been such a funny one sided argument to watch unfold
@chriswright8114
Жыл бұрын
@@Rurik_Luci yes, it's situational. the situation being blacksmithing. you know, where you aren't using a two handed sledge. so what's your point?
@chriswright8114
Жыл бұрын
@@MichaelMorris1991 it's actually sad seeing you post the same bullshit comments over and over for no reason
@TheJtube97
Жыл бұрын
Makes you think about how strong they had to be to work this all day
@andrew6464
Жыл бұрын
Not just strong but also the endurance it must’ve took it’s basically being at the guy all day every day most jacked people only go to the gym a few hours a day and they have rest days and they slowly lift the weights instead of rapidly lifting them repeatedly but with hot metal you gotta work fast
@patrickchef8303
Жыл бұрын
The heaviest hand hammer you would use would be around 4 pounds thats a small strikers sledge
@bennik9902
Жыл бұрын
How the fuck did they eat that much shit to be able to sustain swinging that mf all day? Like... thats a shitload of food man
@ComicusFreemanius
Жыл бұрын
Had?
@aarepelaa1142
Жыл бұрын
Doesn't take much strength, you don't need to be swinging a one handed sledgehammer very often, or i guess maybe you'll sometimes have to use one of them alot, but at that point you'd probably just use an machine that pounds the metal.
@playerunknownbattlegrounds7578
4 ай бұрын
I thank the Great Elder for imparting me with the knowledge of Greater Beings for someone as insignificant as me, a mortal. I hope to become a Cultivator and to reach The Nascent Soul Stage and become your disciple.
@-Dillion-
7 ай бұрын
I love your videos/shorts! They’re very very helpful! You’re also a very very good teacher, the way you teach you can teach anyone no matter how the learn! It’s very simple and to the point, I think that’s the best and most effective way of teaching imo!! Keep the videos going man! You’re seriously killing it!!
@nathanpetherick5539
Жыл бұрын
he is no simple blacksmith, the size of that hammer and majestic beard proves that he is Thor
@captainnelson9833
11 ай бұрын
He is Hephaestus himself
@ShrekThaOGEE
11 ай бұрын
I think that might be racist😂
@mysticlance4566
Жыл бұрын
Idk if I’m amazed by his set up or his shiny bouncy curly hair
@yuin3320
Жыл бұрын
That hair does deserve some credit.
@hi_its_jerry
Жыл бұрын
yo i didnt even notice his hair. looks majestic
@kanejordan5938
Жыл бұрын
Y not both?
@shadeaquaticbreeder2914
8 ай бұрын
Just the thought of how many times you would be picking up that big ass hammer just makes me die lol. You guys are monsters!
@therealbahamut
4 ай бұрын
This is a wonderfully important note about smithing that just may be useful in my writing. Thank you.
@_ZACK_-rz7kc
Жыл бұрын
Idk why... But i just feel calm hearing that hammer hitting the anvil...
@daytonraught629
Жыл бұрын
Memories of playing Skyrim as a child
@okname5335
Жыл бұрын
cuz it sounds awesome
@BlobBlobkins
Жыл бұрын
Memories from Gothic and Gothic 2
@gabrielc.4610
11 ай бұрын
Could be an ASMR
@AChunkyDog
11 ай бұрын
Could be genetic as well. Dig into your ancestry.
@davidguerra003
11 ай бұрын
Not only did it clear up questions I didnt know i had, it made me appreciate this as an art and a skill/trade
@taarminio
11 ай бұрын
And now you know the difference between a cold chisel and a chisel.
@isaac_aren
8 ай бұрын
I really like this effect. Really makes you feel like you are doing it right when there isn't much rebound
@Kspice9000
8 ай бұрын
"Working as intended, feature not a bug" -God
@ThomasJeffersonEdwardsIV
Жыл бұрын
If i keep watching this guy I’m gonna learn something
@kennymccormick8295
Жыл бұрын
A rare comment that actually made me chuckle. Thanks.
@benjaminholcomb9478
Жыл бұрын
Same, idk what else, but this is the first one.
@spinningchurro
Жыл бұрын
Same.
@DaGreenMarshmello
Жыл бұрын
Yeah… you might turn your device off and sit and bed… reflect on what you accomplished watching videos on social media and realize… holy shit I don’t remember much of that and I didn’t accomplish anything very productive for my own future.
@benjaminholcomb9478
Жыл бұрын
@@DaGreenMarshmello well, you go ahead and do that and let us know how it goes.
@DurzoBlint178
Жыл бұрын
This guy has single handedly waged war against heavy hammers and I'm here for it
@CasualTS
8 ай бұрын
Yes, you definitely cleared up a question that I'd never thought to ask.
@mysticalglowtv1796
2 ай бұрын
Was up all night thinking about this. Thanks for clearing this up for me..
@bio7noob
Жыл бұрын
He's just super strong and he's messing with us rn
@jaycole5353
Жыл бұрын
Thor's son, lol
@erisofterra8986
Жыл бұрын
Heated metal eats the hammers inertia more effectively because unlike the cold metal it actually gives way, acting as a cushion.
@ryany4n
Жыл бұрын
Or you just being dum dum and ignore the fact
@bolson42
Жыл бұрын
@@erisofterra8986 yes, the hot metal absorbs more energy which is also why it’s able to deform easier than cold metal.
@erisofterra8986
Жыл бұрын
@@bolson42 Thats what I said
@drewishaf
Жыл бұрын
This is something I actually had to explain to my new hires when they came to my bending department. We bent a lot of plate and angle iron for EHV transmission towers and the stuff under 3" flanges would usually be done by hand with a hammer on an avil table (4" thick hot rolled steel plates on a 40" table.) We mostly used 3lb hammers since we only had to move them about 5-10° on the flange, but we were doing this for 8-12 hours a day. After a few hours, your muscles will get sore if you're just trying to go with no rebound between strikes. That's part of the reason why I'd tell them to get a strike on your bend line, rebound up an inch or two, come back onto the anvil, and use that extra rebound into your next strike, then repeat. It gives just a little bit less tension on each strike, adds a bit of time between strikes, and gives you a chance to see where you're going. Plus, it made it always sound like we were working extra hard so the upper management didn't want to bother us 😆
@hawkknight4223
5 ай бұрын
God bless you man. Your patience is unfathomable.
@BladeLigerV
11 ай бұрын
Its one thing to read about physics properties like this. Its a whole nother world to see them in practice.
@ruvian7817
11 ай бұрын
That cold steel brining back my RuneScape days.
@carlitosway5204
11 ай бұрын
I see you’re a man of culture
@eatitwithyabooty
11 ай бұрын
I still play but this didn’t remind me of RuneScape lol
@MindedConscious
11 ай бұрын
@@eatitwithyabootyaudio cues my dude, audio. It's a nostalgic sound for many.
@d3s1r3dpk
11 ай бұрын
@@eatitwithyabootycuz u wasnt making money off them steel bars 😂😂🤝 them money maker guides back in the early 2000s were my sht. And pking
@Qwerty0791
11 ай бұрын
@@d3s1r3dpkBROOOO you just unlocked a core memory of being pissed off the inventory didn’t have enough to have a perfect 2:1 ratio for the bars lmao. Holy shit that must have been like 20 years ago
@banztagtv
11 ай бұрын
"nothing like cold steel on a hot day" ~some character who knows too much
@leonestello8519
11 ай бұрын
Underrated☝️
@itsvertx
10 ай бұрын
Oscar Mike 🫡
@lindholmaren
8 ай бұрын
Real men use ironsights? I use heavy artillery
@arekusu.
8 ай бұрын
"I got some good pieces out here if you're looking to buy. More inside!"
@jamescobb3037
10 ай бұрын
I figured the hot steel absorbed a lot of the energy but this did a great job illustrating it, awesome video!
@midievel8479
11 ай бұрын
Ah yes, a good old elastic and inelastic collision from high school physics class
@adr7ex
Жыл бұрын
That was a very good demonstration and explanation on how metal reacts when it’s cold and hot. I’m guessing when metal is hot, it absorbs the impact of the mallet.
@isopodlounge
Жыл бұрын
This is exactly it. When steel is cold, most force applied remains in the elastic region of the stress/strain curve, meaning that it immediately returns to it's original shapes and retains very little deformation. When the steel is hot, the energy that was bouncing the hammer up is now put towards deforming the material. This all happens because the steel has a new crystal structure when heated up, one that is more prone to deformation.
@lukehunter2362
11 ай бұрын
@@isopodloungeThis. The stress strain curve is called the Young’s Modulus and refers to the toughness of a material. As a material heats up it becomes less tough but more ductile so the Young’d Modulus would decrease and the strain of the material would increase I.e. the material deforms under impact force.
@calcium_skeleton
11 ай бұрын
It’s like how when you fall on the trampoline the ground goes down and when you fall on the hard floor your legs hurt if you don’t roll because the force gets sent back up into your legs since obviously the ground can’t absorb much or any of it, this is why when you jump off a very tall building you die.
@geodude210
8 ай бұрын
I feel like that one office guy that knows the book, but hasn’t been out in the field
@durere
7 ай бұрын
It cleared things up that I didn't even know need clearing up. Thank ya.
@BigCobra191
7 ай бұрын
Bro looks like the typical dwarf blacksmith from fantasy books and games
@vedarovski4110
11 ай бұрын
When you hit cold steel, most of the force is transformed back to movement. However, hot steel transforms that energy to change the shape of the metal.
@beniaminorocchi
10 ай бұрын
In other words, heating steel makes it more plastic, which is why you heat it if you want to shape it
@macduchesne1849
9 ай бұрын
Both of these comments seem so unnecessary, I thought both of these things are common knowledge taught at a.primary school level
@Sartorri4666
9 ай бұрын
The energy is NOT transformed. It is absorbed.
@arthurmoore9488
9 ай бұрын
@@Sartorri4666 And transformed into heat...
@Sartorri4666
9 ай бұрын
@@arthurmoore9488 The steel is already hot. No heat is transferred from the hammer head. The energy is absorbed!
@I3eyond
Жыл бұрын
Bro is bringing out even more the inner man in me. I wanna learn the trade of blacksmiths and lumberjacks lol
@m4rdoo
Жыл бұрын
Exactly lol Make another generation of such men by watching these
@elijones7926
Жыл бұрын
Why not combine them and create a whole new job? It could be called blackjacks. Or lumbersmiths xD
@Indiana_Jesus
Жыл бұрын
@@elijones7926 ya so i burn wood and smack it with the hammer until there's nothing left hopefully one day I'll make something🤣
@Gameprojordan
Жыл бұрын
blacksmithing sounds like alot of fun honestly. lumberjack I'm not that interested in
@jonathonsaavedra843
Жыл бұрын
Ive had an odd fascination with learning old skills like the ones you mentiones, wood working and black smithing. Also wanna learn more about bushcraft and outdoor survival, idky one day i just decided i wanna be an 1800s mountain man lmao, glad to see it aint just me with these random desires
@olympian1397
4 ай бұрын
Bro was a cyclops in previous life
@taiyana5194
5 ай бұрын
yeah, its softer and absorbs the impact WAAY more so there far less rebound, i love physics
@TheDreadedAssassin
Жыл бұрын
My man dispelled that one dudes claim using that heavy hammer all day lifting it every hit on a project without damn near dying lol.
@joelfryer4898
Жыл бұрын
What
@TheDreadedAssassin
Жыл бұрын
@@joelfryer4898 different video someone claimed they were using a heavy hammer all day with getting tired and this guy made a video saying that that same person was full of it. Then later I found this video and thought it was funny and cool how he actually made a video showing why it's probably not good for anyone's health to bear all that hammer weight all day, nor could anyone go the whole day without breaking a sweat.
@hollywafflez4722
Жыл бұрын
I love that he is not only an excellent blacksmith, but also looks perfect for it.
@Professional_loser
Жыл бұрын
He looks like the guy from infinity war
@khayaradebe2233
11 ай бұрын
Blacksmithing looks like so much fun, you can tell this guy really loves his job
@RawpowerINC
11 ай бұрын
Sorry about that our team will get right to it and patch up the bug. Thanks for the feedback!
@maxcarroll8639
9 ай бұрын
Coefficient of restitution massively decreases when one of the materials plastically deform. Hot steel permanent deforms so has a low coefficent of restitution
@abrahamlincoln9758
Жыл бұрын
I've been wondering why I see guys tap the cold steel when hammering. This clears it up perfectly. Thanks.
@ankylosaur1723
Жыл бұрын
I dont know if blacksmiths do this too but my ferrier buddy will hit the the anvil a bunch to make sure he has the swing down to hit the hot steel in the exact perfect way. Kinda like golf warm up swings i guess.
@burrowsforge3538
Жыл бұрын
It’s more of a rhythm thing, to keep your rhythm while you adjust a piece. Most smiths won’t want to hit their anvil face with a 12lb hammer if they can avoid it.
@RuneRaged
4 ай бұрын
I've learned more from this guy then i thought I would
@AnOrdinaryJoe
5 ай бұрын
That sound makes my brain *tingle*, I always mean to take blacksmith classes but I have none near me 💀
@DxnnyLy
Жыл бұрын
I love shorts like these! Knowledge is power, even if it doesn’t apply to someone’s everyday life.
@Manwhoassociateshimselfwithbat
Жыл бұрын
“No big hammer” Bro you’re literally wielding Mjolnir
@MichaelStem-bf6lv
9 ай бұрын
You mind telling me what your doing? Sir, giving the covenant back their 12 pound hammer.
@ImmortalLemon
7 ай бұрын
Man I know I learned exactly why this happens when I got my machining degree but it’s still so fun to watch and experience for myself over and over again
@WizardOfRhine
Жыл бұрын
Short, concise, and educational. Good short, have a like.
@headbangerforrozeiro3884
Жыл бұрын
this is the quality content I strive for
@Preston241
4 ай бұрын
That never occurred to me but makes perfect sense.
@higurashikai09
8 ай бұрын
I dunno what this video cleared up since I know nothing about metal working, but now I know that the sounds used in movies for metal working is just hitting the anvil rather than hot steel.
@codyjames7019
Жыл бұрын
I Learned something new today. I didn't ask to learn it or ever care, but u did it in such a way it was very entertaining. Subscribed
@amoose8439
Жыл бұрын
Bro the way you hit the breaks and let it down gently was the impressive part
@mattmarsh3614
Жыл бұрын
It's easier to slow down the fall of the hammer when you point the head up when you go to set it down. But that said I don't swing a 12 to often lol.
@err_4044
8 ай бұрын
As a machinist apprentice who works with CRS and hot steel everyday, I always wondered the difference. Thanks for clarifying it.
@Thundermuffin93
Жыл бұрын
Im just impressed you can lift that 12# hammer up like that with no rebound.
@thehashslingingslasher2708
Жыл бұрын
It's only 12 lbs man.
@RapTapTap69
Жыл бұрын
@@thehashslingingslasher2708 you've never swung a 12 pound hammer on that short of a handle then lol. The mechanical advantage it has on your hand is insane.
@trippin8585
Жыл бұрын
@@RapTapTap69 "*that short* of a handle" Are you implying that if if the handles was even shorter than that it would be difficult to pick up or because it is short, it has less speed and less impact as a result? A longer handle would make this hammer close to impossible to swing with one hand consistently by most people. Even if it gives the end of the hammer more speed most people would lose stability in picking it up due to the moment (torque) involved.
@RapTapTap69
Жыл бұрын
@@trippin8585 the "that short of a handle" was referring to using a hammer 12"-16" from the head. On a 16" handle you're fighting the entire weight of the head with 0 mechanical advantage. With a full length sledge handle, if you're holding 16" from the head, you have the entire rest of the handle to help fight against the leverage of the head. You wouldn't be holding a full 3-4' handle at the very end by one hand as it's far too inefficient and hard on your wrist. It would be easier to swing the hammer shown in the video if he held right at the head but you're losing all the advantage of the hammer Not sure if this made sense lol
@slmont8915
Жыл бұрын
When I see these vids pop up. I feel like I'm in skyrim visiting the smithy. Love it
@codymiller5173
7 ай бұрын
The hot steel absorbs the vibrations better, thats an impressive bounce i must add !!
@croc3453
2 ай бұрын
This is the most blacksmith looking man I’ve ever seen.
@rokumi1424
Жыл бұрын
Tony Stark in cave intensifies
@sparky8455
Жыл бұрын
This happens because when the metal is cool, its atoms are closer together and create a rebounding shockwave that travels back into the hammer. When it’s hot, the atoms are further apart and will not have as many opportunities to collide with each other.
@joehyatt3709
11 ай бұрын
Thank you 😂 i really didnt wanna google that.
@TastyMuff1n
11 ай бұрын
The anvils top surface is hardened which makes the hammer rebound so much, normal steel won't cause the same bounce. Cool the steel he's hitting down normally and it still won't behave the same as hitting the anvil
@darthpaladin15
11 ай бұрын
As a materials science PhD I have to correct the sentence. Good reasoning but the "chances to bounce back" argument is wrong. Is more about the energy of the atoms
@golden_glitch_
11 ай бұрын
I can confirm Metal is cool af 😎
@twisterthemonk
11 ай бұрын
Ummm awkually hahah jk thanks for the fact 😂❤
@vision4860
2 ай бұрын
"Let's get some steel that's *somewhat* hot." Pulls out from the kiln a piece of steel *burning with the heat of the sun.*
@geennaam1201
8 ай бұрын
Never thought of anvils as bouncy castles
@psun316
Жыл бұрын
Why does my back hurt from hitting steel with a hammer all day you ask? Because the metal is freaking HOTT
@eyespyyourspy1328
11 ай бұрын
This is why the older smith's go back and forth between the hot steel and anvil in a "musical" fashion. The anvil strike is to help with muscular endurance.
@Leto_0
8 ай бұрын
lol no... it's to keep their rythm and give them a chance to change the angle of the hammer or iron Everyone's gotta make shit up to sound smart these days 🙄
@eyespyyourspy1328
8 ай бұрын
@Leto_0 138 likes and one non-blacksmith disagreeing. Maybe you just don't understand the context and the vocabulary expression used.
@bigsmall246
8 ай бұрын
@@eyespyyourspy1328I think the better way to explain it is that the anvil strike is a way to let your muscles rest without losing momentum. The other way of resting, simply not moving the arm, causes you to lose all your momentum.
@lxcky21
8 ай бұрын
I was just about to ask if you could alternate them to strike with momentum every time! Thank you 😛
@Grunttamer
8 ай бұрын
No. So you don’t just beat the steel with a hammer, each blow has to be aimed and angled to push the steel where you want. So you strike the workpiece and then adjust with the tongs in the other hand as you strike the anvil so you have time to get things situated before the next blow. The consistency and rhythm is just because they are doing this for long periods of time and it helps with endurance if you arent constantly stopping and starting
@chillreznov0227
9 ай бұрын
He's grunting only because he's humble
@Iceburgh6901
9 ай бұрын
And this is a perfect demonstration of why rebound in an anvil doesn't matter as much as some people think it does. The energy that isn't going back into your hammer is going into the hot steel, deforming it. Which is kinda the point of heating up the steel in the first place. Hammer vs anvil makes for an interesting exercise routine, or better theatrics.
@TheCoalDragonForge
9 ай бұрын
Yes rebound in an anvil is very important! The energy goes back into the work. Not getting absorbed into the anvil. Try forging on a dead anvil it will suck
@hunterp7821
Жыл бұрын
Thanks for taking the time to show what you do, would love to see more skill sets
@isaack5141
11 ай бұрын
the reason there is no rebound from the hot steel is because the energy is going towards deforming it rather than transferring back to the hammer
@iiammon2677
9 ай бұрын
Now I’m listening to between hammer and the anvil 😂😂
@Suf8910
4 ай бұрын
Thats the most NPC anvil sound i’ve heard and i like it sm
@Kylegatzke1997
Жыл бұрын
My smithing on RuneScape brought me here... Love this content!
@kylehayden3113
11 ай бұрын
The number of times I've had a huge gym jock come to one of my classes and pick up the 4lbs hammer just to take half and hour to make a mangled bit of steel before getting too tired to continue is unbelievable
@ianblanchet5500
8 ай бұрын
Muscle power is not the same as muscle endurance. Big muscles mean being able to lift heavier loads, and while they do give you slightly more endurance due to the loads being lighter to you, the muscle fatigue still kicks in quick.
@Drekromancer
8 ай бұрын
This comment is so real
@bigsmall246
8 ай бұрын
Big muscles usually means more explosive strength, but low endurance. That's partly why sprinters are buff but marathon runners are skinny.
@kassiog.6595
8 ай бұрын
i use a 4lbs hammer, but for 40-45 minutes using a 2 pounder every now and then to "rest''
@lubrew5862
8 ай бұрын
Well since you are using different muscle and using them in a different way, then okay I guess. I get you were just trying to brag but it is just silly. The same goes with any job where you are using your muscles differently than you normal.
@FatChanceTheCouchDog
11 ай бұрын
Now I understand the tink tink from actual blacksmithing. First blow is on the hot while the second is the transfer blow to the cold to help rebound and make the work easier.
@Thomass-yc7wm
4 ай бұрын
It’s because as the heat makes the metal more malleable, it also makes it less rigid so your hammer can’t rebound off of it since the energy being converted from kinetic into shaping your piece.
@aPastelDragon
Жыл бұрын
This is the content I need in my life
@vince-zm8ds
Жыл бұрын
“Somewhat hot” Metal: *glows with the fiery power of satan running through it* Edit: it was a joke Jesus Christ
@Tntah
Жыл бұрын
The camera makes the metal look way hotter than it really is. I’ve tried filming my forging before and found I couldn’t tell how hot the metal was by eye because the camera picks up some of the IR coming off the hot steel.
@randoprior4130
Жыл бұрын
When a blacksmith is talking about metal, that is cold.
@SorenPrime
Жыл бұрын
That metal is barely 600°F you can work it but youre gonna have to redirect the material
@JohnRambo1947-July-6th
Жыл бұрын
@@SorenPrime but I'd be burnt to a crisp at 600F!!!!!
@SorenPrime
Жыл бұрын
@@JohnRambo1947-July-6th yes YOU would the metal on the other hand is barely glowing which means if you're gonna forge it you're going to be hitting it for awhile where if it was glowing between red orange and white you'd have more give in the material so hitting it less often getting more out of your effort
Пікірлер: 6 М.