Thank you for the pro trick with the screw drivers. That helps. Regards from Austria.
@LowCountryHarleyDavidson
9 ай бұрын
Always amazed how far our videos reach. Thanks for watching….Doc
@Big88Country
9 ай бұрын
Appreciate that Doc, good to see ya Sir!!
@BrewCityRider
9 ай бұрын
Love the little screwdriver pro tip. That cafe racer on the lift behind you is SWEET!
@kennethanderson1685
9 ай бұрын
Always great content :)
@steventwiddy3402
9 ай бұрын
Doc I want to wish you and your family a very merry Christmas 🎁🎄
@LowCountryHarleyDavidson
9 ай бұрын
Thank you so much….Doc
@billcorbin6174
9 ай бұрын
Doc Thanks again for the info!
@chrisbolton5461
9 ай бұрын
Cracking advice.
@joeharley87
9 ай бұрын
Great info.
@bigheadbiker
9 ай бұрын
Man thanks Doc your unbiased info is always appreciated! Keep it up man! Thanks for speaking the truth
@bradduffield9603
9 ай бұрын
Thanks for the advice. It'll help a lot I'm putting LED auxiliaries on my 2917 street glide.
@jondoe8816
9 ай бұрын
Doc. Love the XLCR In the background
@LowCountryHarleyDavidson
9 ай бұрын
Me too….Doc
@RandyCRR
9 ай бұрын
Patience Doc, patience Doc.
@dtork47
9 ай бұрын
Always helpful, thanks Doc. Stay safe.
@jimkelley5578
9 ай бұрын
Love that bike behind you on the lift!
@LowCountryHarleyDavidson
9 ай бұрын
Me too!….Doc
@Bikernewscanada
9 ай бұрын
Thanks Doc. I have a 2009 Road King. Bought a full set LED from amazon. Worked and fit very good but yes, no visor on the passing lamps. Price was very low. 👊
@MidnightExpressMC
9 ай бұрын
Thank you! 👍👍
@michiganborn8303
9 ай бұрын
I'd love to add some auxiliary lighting to my '20 Road Glide Special.
@roblow5522
9 ай бұрын
You always have great videos. Just to let you know, I installed a used set of LEDs in my 2012 Electra Glide Classic. I used the nesting rings and it all went together fine. I don't know the brand but they are not as deep as the one you had in the video. With used you don't get directions. I don't know if it would have worked without but they fit so I used them. I had the LEDs on my 2007 Ultra. I hit a deer and broke them clean off the bike. With some internal repairs and sanding and buffing I installed them on the Classic. Big improvement over stock. I just have to get the adapter harness installed on the Classic so they stay on bright and dim. You maybe could do a video on installing one if you are looking for new content. It is an easy install but I don't think a lot of people know you can do that. I have found that the aux. lights will come on if the switch is in the acc. position. You just have to turn them off with there switch.
@LowCountryHarleyDavidson
9 ай бұрын
Thanks for sharing….Doc
@Biker-Jim
9 ай бұрын
Upgraded my headlight and auxiliary lights on my 01 Roadking last year, I got lucky mine was just a plug and play. Glad I did what a huge difference.
@whip-its_dad4239
9 ай бұрын
I always learn from your videos Sir . thank you for making them .
@LowCountryHarleyDavidson
9 ай бұрын
Thank you for watching…..Doc
@stephendrake8145
9 ай бұрын
Beautiful XLCR over your shoulder Doc!!! FYI I used Kuryakyn Prism LED headlight & auxiliary lamps, they fit perfectly except for the headlight pigtail which I ordered separately. They are neat since the LED ring around the lamps can be any color. I matched green with the Radioactive Green FLHX & orange with the XLCR…
@stephendrake8145
9 ай бұрын
I meant to type XR1200, I wish I had an XLCR. Wouldn’t give up my XR1200 for one tho!!!
@LowCountryHarleyDavidson
9 ай бұрын
I bet that looks awesome at night….Doc
@getoffmygrass6974
9 ай бұрын
Upgraded my 2002 EGS AUX/Headlamp with LED's. I had to grind the lip down on the trim rings, only a 1/16" but it's enough to not fit. It's literally a night and day difference.
@LowCountryHarleyDavidson
9 ай бұрын
Thank you for sharing your experience and the results….Doc
@stlchuckhd
9 ай бұрын
Thanks Doc for the informative vlog. I especially liked the mini screw drivers tip! Any thoughts on LED replacement bulbs for the standard light bulbs? Thanks for your time
@LowCountryHarleyDavidson
9 ай бұрын
A good thought. Just remember they are adjusted differently than sealed beams. I think I have a video on that…Doc
@Old940
9 ай бұрын
Aircraft landing lights are 12 volt seal beams and will fit the passing light bucket great. Used them for years, but did go LED now on my 04 Ultra. Less amps for same amount of output.
@LowCountryHarleyDavidson
9 ай бұрын
That’s a lot of amps!!!!!…Doc
@Old940
9 ай бұрын
@@LowCountryHarleyDavidson yes about 17 amps.
@Old940
9 ай бұрын
@@LowCountryHarleyDavidson Do you remember grounding the field on the old 6 volt generator just to run the passing light?
@shameless6963
9 ай бұрын
Couldn't stop looking at that beautiful CR 1000 in the background.
@LowCountryHarleyDavidson
9 ай бұрын
And they wonder why I did the video in that location 😆….Doc
@roncoburn7771
9 ай бұрын
I like eagle make good lights
@okiemale1589
9 ай бұрын
😎👍 Big thumbs up for the channel...
@brianlevan339
9 ай бұрын
Thanks Doc ! I'm looking to upgrade mine,( 02 Electra) still deciding which way to go.
@lightninsadventures2692
9 ай бұрын
Can you make a video on installing the old tin style headlight visors(p/n: 67752-77T) on a road king or Electra glide. I've heard many people say they had issues getting them to fit tightly or could get the bezels to close up, said H-D's instructions weren't the best on those parts.
@LowCountryHarleyDavidson
9 ай бұрын
It really takes patience and dexterity….Doc
@garyzanghi9272
9 ай бұрын
Make sure they see you
@tobpitbull
9 ай бұрын
Upgrading to led can trigger your ECM as well
@LowCountryHarleyDavidson
9 ай бұрын
If you are talking about turn signals and the Turn signal module or BCM…Yes…Doc
@d1mennis
9 ай бұрын
So Doc! I upgraded my headlight on my 2012 Ultra with an LED one. It totally distorted my radio. I had to install filters on the wires to get rid of it!
@LowCountryHarleyDavidson
9 ай бұрын
Wow. That’s news to me….Doc
@TheRoadGlideRider
9 ай бұрын
I bet some will still get it wrong, or not be able to complete the change. 🤔🤔🏍💨🏍💨
@LowCountryHarleyDavidson
9 ай бұрын
Have faith in your fellow riders…..Doc
@jake6618
9 ай бұрын
Hey Doc, why don’t they make auxiliary lights for the Freewheeler? At least I haven’t been able to find them.
@steverollins4690
9 ай бұрын
What a shock to see an XLCR on the lift behind Doc, no dealer that I've done business with would ever touch one, probably because they don't know what the hell they are doing!
@stephendrake8145
9 ай бұрын
Someone else noticed the XLCR…
@LowCountryHarleyDavidson
9 ай бұрын
It was a pleasure to work on…A challenge…but all worth it…..Doc
@peteosinga8845
9 ай бұрын
Used to be a $7 bulb
@LowCountryHarleyDavidson
9 ай бұрын
And I grew up with a 5-10 cents stores you now have dollar stores…..Doc
@everettyost8639
9 ай бұрын
Doc, is that bike behind you an XLCR?
@LowCountryHarleyDavidson
9 ай бұрын
Yes it is…..Doc
@DennisD9799
9 ай бұрын
Having some issues with led turn signals, Throwing codes L turn & R turn open. All signal & running are working properly, However Gauge indicators show a fast blink. This is a 2013 FXDF, Harley service has replaced the BCM & ECM, No change. I have done many searches to correct this and several procedures with ignition switch and flashing signals. You might have something to correct this or should I just live with it?
@fowyb
9 ай бұрын
Possibly, if you've gone from bulbs to LEDs, your bike may need a resistor for the ECU to see the smaller current draw and voltage drop on LEDs. Just a thought. You'd think the dealership would have spotted that, but mine put a fairing door in backwards, so don't think all techs are Doc Harley.
@DennisD9799
9 ай бұрын
Ya think, They replaced with all incandescent. Then tossed the LED's, That was there fix. How would I add resistor?
@billyjones3787
9 ай бұрын
You need to call Custom Dynamics. They have a signal stabilizer that solves your issue. 2013 and older touring needs one to correct the hyper blink. Your dealer replaced the BCM and ECM?! A simple google search would have given you or them an answer to your issue. Post that shops name so the rest of us can avoid them.
@LowCountryHarleyDavidson
9 ай бұрын
Before 2014 changing to LED turn signals would affect the turn signal module. You haven’t understand HD created the system so the operation would turn off on its own ( yes older bikes you had to hold down the button). Change the resistance like bulb to LED and the “system” does not know how to deal with it. Installing a aftermarket “resistors” in the wiring with the LED units usually returns the resistance back to factory specs. In the early days these resistors would get so hot it would melt item’s nearby…..Doc
@DennisD9799
9 ай бұрын
@@LowCountryHarleyDavidson Thank you so much, They told me the can bus doesn’t the need resistors . However they did not fix the problem either. I will see if there is a plug in harness i’d rather not cut and solder wires. If there is not one it just throws the signal codes, I’d rather be seen with the additional working led’s. I can put up with the codes. Think you have a great channel, Love the tech tips😎
@Ironhorse360DEG
9 ай бұрын
in 2020 i bought a 2012 fatboy, it had/has a flies eye headlight. i believe the headlight is causing several codes 2151, 2261, claiming my brake light, and turn signals have an issue. since all the lights work, i ignore the red light telling me there is a code. i have cleaned the ground at the battery, that seem to help for a short time, but the red light comes and goes randomly. i've not pulled the flies eye out, but i accuse it of having a resistance difference from the other lights, thus setting the codes. any ideals?
@garyzanghi9272
9 ай бұрын
Load Balancer ?
@LowCountryHarleyDavidson
9 ай бұрын
Gary you always come up with the most interesting post. Hope you will like one of our 8 years of content or find a channel you can post positive….Doc
@garyzanghi9272
9 ай бұрын
@@LowCountryHarleyDavidson always I find your content interesting So much bad information out there from some of these wrench jockeys Your videos clear a lot of that up
Пікірлер: 73