Specs of this build (note these include affiliate links which may earn me a commission at no extra cost to you): Motherboard - Asus ROG STRIX Z790-A GAMING WIFI 2 amzn.to/46TdrYN CPU - Intel Core i9-14900K amzn.to/46xZ101 RAM - Corsair Dominator Titanium 32GB 72000MT/s go.corsair.com/baya19 GPU - Asus ROG Strix RTX 4090 OC White Edition (amzn.to/3tr1nzc) PSU - Corsair RM Shift Series 1000X Shift (kzitem.info/news/bejne/2pecyH93rqufp6w) Fans - NZXT F120 and F140 Core RGB Fans kzitem.info/news/bejne/zoaI2IR9o4iQnaQ AIO - NZXT Kraken 240 RGB amzn.to/45UfqKY NVMe - Crucial T500 NVMe 2TB Other NVMe - Crucial T700 kzitem.info/news/bejne/o2ZuqapuiZRqoX4 Crucial P5 Plus - kzitem.info/news/bejne/uqCF33d4cIiinaw Case - NZXT H6 Flow RGB kzitem.info/news/bejne/16qCyXeYr4WpeKw Vertical GPU mount - kzitem.info/news/bejne/k5qiqGeYhnh7iI4
@cunnilinguswithcaitlyn6345
7 ай бұрын
@TheProvokedPrawn just looking at making a similar build. The RM Shift 1000x is 210mm and the H6 flow says up to 200mm is compatible for a PSU. Was there any issues here?
@TheProvokedPrawn
7 ай бұрын
@@cunnilinguswithcaitlyn6345 nope
@Ash_ASMR_
6 ай бұрын
Can I ask a question, where did you buy the second nzxt RGB controller, the only one I can find comes with the fans? 🤔 hoping you reply as I’m building a pc within the next week 😢
@TheProvokedPrawn
6 ай бұрын
@@Ash_ASMR_ you'll want one of these amzn.to/432Oyc7
@Ash_ASMR_
6 ай бұрын
@@TheProvokedPrawn is that the same one that comes with the f140 core RGB fans or does the same?
@Jebfrombritain
2 ай бұрын
Out of all the KZitemr’s that build pc’s this guy is my favorite, very little or no cuts at all in the videos when installing stuff, clearly demonstrates it in case an out of case installing, simple and to the point. If I had to recommend any person to my friends, this would be the guy.
@TheProvokedPrawn
2 ай бұрын
Appreciate it. 🦐
@EyeofValor
25 күн бұрын
His product placements destroy this from being a good video.
@Charleyt302
9 ай бұрын
I appreciate this build guide because I bought this case but didn’t foresee all the other stuff that’s not included or is needed. Like you may need another fan and rgb controller or an usb hub for the controller and stuff. Helps me organize and put together my pc when I get all my components
@TheProvokedPrawn
9 ай бұрын
Glad I could help
@Airman2324
6 ай бұрын
What extra stuff do u need?
@Charleyt302
6 ай бұрын
@@Airman2324 a fan/rgb controller, and a usb hub
@KcKeegan
6 ай бұрын
According to nzxt, the bottom fans don't improve temps. Left mid-top fan actually harms the out take if you're using an AIO. So, if you're budget conscious, you could just keep the stock fans and add a 280 AIO and you're done. Positive air flow and again, according to nzxt, optimum airflow
@bradlqwerty4102
6 ай бұрын
@@KcKeegando yk where this is said?
@niko-vslds
10 ай бұрын
Thanks a lot for this step by step build. I’ll be building my first ever PC next month, with a H6 Case and Rog Z790, so this is perfect for me!
@TheProvokedPrawn
10 ай бұрын
Good luck
@claysmurthwaite2386
10 ай бұрын
I'm using alot of the same parts.. 360 aio. First build.. this is gold
@Candie-qw2vn
3 ай бұрын
I'll be doing it but with a X670 AX V2
@ArdaSReal
4 ай бұрын
Exactly what i have searched for! This is going to house my first ever pc build after so many years of wanting to build one
@TheProvokedPrawn
4 ай бұрын
I've got a playlist here which might be useful too - How to build a gaming PC: kzitem.info/door/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z
@ArdaSReal
4 ай бұрын
@@TheProvokedPrawn ill check it out thank you
@TsuDymphna
3 ай бұрын
I’m planning my first build in the near future and will probably be using this case, this guide was fantastic. What I really appreciate is showing the details of the cabling necessary, so many builds I have watched they just gloss over that. I’d much rather watch in depth cabling over how to insert components into a motherboard , speaking for myself the cabling is the part that seems most intimidating to newcomers.
@TheProvokedPrawn
3 ай бұрын
Excellent. Good luck with the build. This playlist might help too - How to build a gaming PC: kzitem.info/door/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z
@TsuDymphna
2 ай бұрын
@@TheProvokedPrawn Build went perfectly, booted on the first try, just need to do all the updates and whatnot. Beautiful system and really wasn’t too bad a process at all. Thank you again for the clear guide, will happily recommend your channel around to folks.
@fragasm726
17 күн бұрын
Beautiful build. I'm planning an all white build myself but I don't want any black cables at all. I am blown away by some of the prices these days but you sold me on this case for sure!
@FoundSolace
5 ай бұрын
Just moved from the Corsair 4000d airflow rgb to this case and moved over all of the fans and controllers from that case to the h6 and I love it Best upgrade in my opinion
@TheProvokedPrawn
5 ай бұрын
It is great.
@Stigness23
11 ай бұрын
Corsair needs to get off their butts and start catching up to all the great cases that are out there these days.
@djdeaddeer
10 ай бұрын
Fr tho
@westonwalker819
10 ай бұрын
I agree! Love my 5000D, but my wife’s H9 makes me want to swap mine out.
@metalovermetal
9 ай бұрын
Tbh I want quiter fans and less wires first
@Luui2x
9 ай бұрын
Facts but ur wrong corsair is top competitor. High quality and great performance just slacking a bit on dropping new stuff
@lawyerlawyer1215
8 ай бұрын
Or buy this instead of Corsair 🙈
@envyforme5790
9 ай бұрын
such a beautiful pc cant wait to follow this video again when i build my first ever pc thank you!
@TheProvokedPrawn
9 ай бұрын
Thank you. Hope it helps. Sub for more of it.
@Retiredat25
3 күн бұрын
Currently building in this case and i decided to go with the icue link system 😁
@TheProvokedPrawn
3 күн бұрын
Interesting. How'd it go?
@anotherdaysunday
3 ай бұрын
commenting for engagement because i’ll use this for my upcoming build in a few days which is pretty much identical
@TheProvokedPrawn
3 ай бұрын
Thanks for the engagement. Appreciate it. Here's a playlist that might help too - How to build a gaming PC: kzitem.info/door/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z
@anotherdaysunday
3 ай бұрын
@@TheProvokedPrawn thanks man
@furioustester4056
8 ай бұрын
Id close the top gap by placing another 120mm fan next to it so that more heat is exhausted, making the average heat the radiator recieves from the gpu less
@TheProvokedPrawn
8 ай бұрын
A 360mm rad would have been better really
@OGHawkeye
10 ай бұрын
man that 240 rad actually suites the whole build really well and gives it a good balance with the 2 140 fans on the bottom, its good symmetry. reckon you would probably wanna use nzxt duo fans? not totally familiar with all the nzxt products. they are more proprietary than other brands...but i really do like the rich bright color of the fans and the individual settings of them.
@bergdk237
9 ай бұрын
Personally i do not like that there is that empty space at the top, i would still prefer a 360 aio for a full aesthetically pleasing build, as well as giving the extra cooling for the cpu🙂
@izHobo
Ай бұрын
I am a slut for aesthetic asymmetry, and the 240 all-in-one in this case get's me going. I'll be doing a build with this case and while I could get a 360 all-in-one, I'll personally be getting the 240.
@Stephano999
Ай бұрын
Thank you for video, helped me build my f6 with 0 knowlage ♥
@TheProvokedPrawn
Ай бұрын
Glad it helped!
@SelinaMagoree
Ай бұрын
your video was a breath of fresh air. so uplifting! ️
@TheProvokedPrawn
Ай бұрын
Glad you enjoyed it! Hope you appreciated enough to subscribe 🦐
@garyc5245
9 ай бұрын
interesting vertical mount...saw another video where it stated it wasn't possible...very nice!
@ForwardLife
6 ай бұрын
always put the cooler mounted on the motherboard before putting it into the case. Doing the whole backplate and mounting the cooler on this case is going to be a headache. Do that out of case first.
@SportsClipsAndTips
2 ай бұрын
Would you need the rgb controller to change the colors?
@YUNGNOTNYCE
10 ай бұрын
jus got this case for my newest build and it's amazing!
@katzicael
10 ай бұрын
Same! Built in it on Friday, absolutely fantastic case. It's a lot smaller than I thought it would be lol. Much smaller than the 5000D "Airflow" it replaced.
@SabrinaBauknecht-s3v
Ай бұрын
A really cool case but unfortunate at some edges very tight especially at the bottom and on the side. I could not fit my lian Li sl inf uni fans so I had to cut the case a little bit, later I painted and ground it.
@nathan-xv8xx
3 ай бұрын
Is chassis fan same as pwm fan? because I want to buy 9fans including h6 flow case fans. And I want to buy pwm splitter cable will that work?
@ish2k9c
Ай бұрын
Excellent detailed explanation !
@TheProvokedPrawn
Ай бұрын
Thank you
@lilmisery1643
3 ай бұрын
Finna do a 4080 super build into this can’t wait
@TheProvokedPrawn
3 ай бұрын
Good luck and enjoy
@lilmisery1643
3 ай бұрын
@@TheProvokedPrawn I think ima use the phanteks nv5 instead, going for a black case and white internals
@TheProvokedPrawn
3 ай бұрын
@@lilmisery1643 ok well here's a playlist that might help anyway 🦐 🦐How to build a gaming PC: kzitem.info/door/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z
@lilmisery1643
3 ай бұрын
@@TheProvokedPrawn thank you very much , I will subscribe
@walkerdrae
3 ай бұрын
Just got this case. thanks for the helpful video
@TheProvokedPrawn
3 ай бұрын
Glad I could help! Good luck with the build
@AdamFrisch1
Ай бұрын
Hey! You probably don’t check these comments anymore as it is sort of an old video, but I had a quick question about the fans. First off, I didn’t quite understand, is there a way to connect all of the fans to one RGB controller? And secondly, won’t making the radiator fans exhaust be pumping hot air into the cpu cooler? I feel like it would make more sense to make those intake fans. Cheers for the awesome video!!
@TheProvokedPrawn
Ай бұрын
kzitem.info/news/bejne/zIqlyYmoaax8iKw
@TheProvokedPrawn
Ай бұрын
kzitem.info/news/bejne/0oeZ341-gKZypag
@AdamFrisch1
Ай бұрын
Cheers mate!!
@baltazar_ru
7 ай бұрын
Thanks a lot for the video! You have helped me a lot to competently assemble a computer from almost the same components) However, I have a question: at the end of the video, we see that you supply power to the fans from the motherboard, but why not connect power to the controller from the nzxt in addition to the backlight? You can also connect up to three fans to the pump from nzxt, they have a branch there.
@brianhoward9217
5 ай бұрын
Very well shot video - thank you! Have to ask an obvious question though. What on earth cools the 3.5" hard drive? Why only ONE HDD? I'd be using that drive for family data storage for our precious videos and photo storage (WD GOLD HDD - most reliable on earth). So what will be cooling this drive in this case to keep the temp down to the oh so important 42 degrees or less? There seems to be zero fan cooling in the 2nd section with the HDD and wiring. How could they stuff up this aspect in their new and carefully (almost) designed premium case. No HDD cooling - they HAVE to be kidding, right?! `
@jeniestreamz
5 ай бұрын
I gotta start all over with my build now 😅
@TheProvokedPrawn
5 ай бұрын
Why
@Matobit
2 ай бұрын
I've put a 3.5" hard drive but the holes of the disk bay doesn't t align with the holes in the drive so no idea where I'm going to screw the screws in!
@milithegod7702
9 ай бұрын
Can you connect a single nzxt rgb fan to the daisy chain ?
@snottypockets
8 ай бұрын
Gee this is a great install walkthrough , thanks heaps !
@JamiesRaptors
3 ай бұрын
Just what I was looking for!! Thanks
@TheProvokedPrawn
3 ай бұрын
Glad you liked it. Hope you enjoyed enough to subscribe 🦐
@JamiesRaptors
3 ай бұрын
@@TheProvokedPrawn thought I was 🤣 I always watch your videos too
@polaroidd1306
10 ай бұрын
i have a o11 mini with a 240 aio, i actually wanted to see how it would look if i transplanted & its not bad the angled fans makes it look less awkward
@svgmateYT
7 ай бұрын
all i heard was, an additional purcahse is needed over and over
@danielb8573
2 ай бұрын
Great video mate
@TheProvokedPrawn
2 ай бұрын
Thanks Daniel. Appreciate it. Hope you enjoyed enough to subscribe 🦐
@jugettaja
2 ай бұрын
Im planning on all these fans but except im using a 360 kraken aio but my mobo only has 1 rgb header and 4 4pin fan headers plus 4pin pump header is it possible to build it with these components
@aaronmattson8501
9 ай бұрын
I'm a little lost because everywhere I've read online states that you SHOULDN'T plug the NZXT proprietary RGB plugs into the 5vRGB headers on your MOBO. I'm planning a building the H6 and now I'm a little stumped
@omc8872
9 ай бұрын
i just got mine. is a great case, plenty of space. Unfortunately my b450m mobo doent have a-key header for usb-c in the front, so is dead.
@cypherbuddha
2 ай бұрын
Thanks for the video! Very helpful. I'm thinking of replacing my Lian Li 011D Original with this one. Do you think it's worthwhile?
@미시간
10 ай бұрын
Please watch the lighting setting video from the cam.
@Avidregion-esports
9 ай бұрын
im planing on getting one in one day
@TheProvokedPrawn
9 ай бұрын
👍🏼 enjoy
@Mayhemz.95
4 ай бұрын
Was looking at this case with the shift 1000w psu, but cant find a simialr spec rated a tier for a simialr price £140 as the corsiar shift
@youngpipedrilla5498
3 ай бұрын
Would I still need a controller if I only have 1 extra fan for the rear for now?
@Ohitsyaboi
9 ай бұрын
If I wanted to watch someone build a computer I would've looked it up
@TheProvokedPrawn
9 ай бұрын
Huh?
@Sunil_Sukumar
10 ай бұрын
Just ordered the case and ready to set up my first gaming pc. Thanks for the video, can you please explain about the solution for controlling rgb light of 3x system fan + 2 x 140 fans and 1 x 120 fans?
@FeiXenogears
11 күн бұрын
How should the fans be set up? top back bottom? intake and outtake? i got the NZXT Kraken Elite 280 RGB - RL-KR28E-B1 - 280mm AIO CPU Liquid Cooler and i got two fans for bottom and one for back.
@TheProvokedPrawn
11 күн бұрын
kzitem.info/news/bejne/1oZ_s6ppaYikZqw
@brendoYZL
5 ай бұрын
My power supply won’t line up with all screws only 2 fit in good
@gregchilders9660
Ай бұрын
Building this tomorrow. Quick question, i have an nzxt controller (the 6+3 one) and a 3 port rgb one from the 2 140 mm nzxt pack. By my understanding, i can just plug the first 6 fans into ONLY the rgb of the 6 port controller, then plug the final 3 into the 3 port rgb and those 3's 3 power cables into the usb section of the motherboard? Or do i have to plug the 6 fans also into a usb port? I also got the nzxt usb hub
@jaygolden5160
8 күн бұрын
What do we do about fan connections if we don’t use the nzxt controller. I think think my MB has enough headers for how many fans the case can hold
@TheProvokedPrawn
8 күн бұрын
kzitem.info/news/bejne/zIqlyYmoaax8iKw
@SaltyMaud
6 ай бұрын
Hmm, these included fans don't seem to be the same as F120 RGB Core fans sold separately. These included ones seem to be 3 pin DC fans instead of 4 pin PWM, and have different operating range. That's really disappointing when I was hoping to have matching fans.
@spoopatroopa8005
3 ай бұрын
question from noob PC builder. Where is the exhaust? is the AIO being used as the exhaust?
@TheProvokedPrawn
3 ай бұрын
yes and the rear fan
@Controllerplaayer
Ай бұрын
Hi so for the rgb or 5vrgb my motherboard (MSI PRO B650M-A WiFi ProSeries Motherboard) does not have a 5vrgb thing is there somewhere else I can plug it into?
@Muiurica2112
10 ай бұрын
Can a 140mm fan be on the back of the case?pls some1 answer
@ryuken7999
10 ай бұрын
Only 120mm fan can fit in the back.
@budinskee2
10 ай бұрын
Do the items like the power source come with those cables?
@absolutelyblasted
5 ай бұрын
I am buying a 4090 strix but I also want to buy a led strimmer extension. Which one do I get? The 8 pin and 24 pins is confusing to me.
@TheProvokedPrawn
5 ай бұрын
Have you seen my video on them? kzitem.info/news/bejne/tKCF36NogWhqqaw
@d.alhamlan
4 ай бұрын
The 15mm screws aren’t in the accessories box i tried to make the 140mm fans on the bottom fit with the 13.5mm but didn’t work any suggestions?
@cam881
7 ай бұрын
How do I change the built in fans rgb
@eternxl7080
5 ай бұрын
how did you change the rgbs on the case fans??
@pulsar.
7 ай бұрын
Great informative video! This'll help a beginner like me when i build my first pc in this case, would you recommend the rmx shift with this case or should i use a different psu?
@TheProvokedPrawn
7 ай бұрын
Should be fine
@Gigi-fk5qi
10 ай бұрын
so i have a question, i want to build in this case and im planning to add a 240mm kraken rgb like you did, which comes with an rgb controller. can i plug the the 2 aio fans and the 3 case fans all into that one controller, cause the case fans rgb are daisy chained, or do i need an extra controller?
@Luui2x
7 ай бұрын
im gonna use corsair fans all around with hubs
@TheProvokedPrawn
7 ай бұрын
Good luck
@Luui2x
7 ай бұрын
ur being sarcastic or what? im sure they would work on nzxt all im using is there case everrything else is on and connected by hubs ...@@TheProvokedPrawn
@Maettzle
7 ай бұрын
I have the exact same bottom fans, but the screws are too short to connect them? I 100% used the same ones, and the F140P fans from NZXT. What can I do?
@Maettzle
7 ай бұрын
EDIT: I fixed it by using what feels like a bit too much force, to force the rubber cushioning together.
@aboelrouk
6 ай бұрын
Are there any dust filters on this case?
@jorgealexander1055
Ай бұрын
Let me understand, is not necesary to buy NZXT RGB & Fan Controller, just a splitter is necessary and can i control everyting using Asus RGB Software?
@TheProvokedPrawn
Ай бұрын
kzitem.info/news/bejne/zIqlyYmoaax8iKw
@anubissx
4 ай бұрын
hi there, great video. Do you know if the Coolermaster MF140 fit on the case as bottom fans? Thank you. Reason is that Coolermaster fans are cheaper where I lived.
@TheProvokedPrawn
4 ай бұрын
I haven't tried so can't say.
@shadowthehedghog100
6 ай бұрын
Can you use 120mm fans on the bottom instead of 140mm because I don’t have access to 140mm fans where I live
@JulienBertozzi
5 ай бұрын
Not a big fan of the mix of black and white cables, like the rgb color choice though
@TheProvokedPrawn
5 ай бұрын
Fair enough. You don't have to copy it 😀👍🏼
@oldtimer666
5 ай бұрын
I have seen people remove the fans which comes with the case and they install something else. Are these fans that bad?
@TheProvokedPrawn
5 ай бұрын
It's just a personal choice I expect
@Matobit
3 ай бұрын
does the case not come with the RGB controller included
@Matobit
2 ай бұрын
Nope
@edinick2824
2 ай бұрын
Sorry for the noob question but do the front panel cables come with the case ? I mean like the usb and usbc cables
@TheProvokedPrawn
2 ай бұрын
They're attached to the case, yes.
@ZaynEditor
Ай бұрын
hey man idk why but my prebuilt 3 fans are argb and i cant find them in nzxt software i can see my aio and change its colors but the prebuilt fans are stuck to one color
@luyys12
5 ай бұрын
I bought the case without rgb fans so can i move the 3 fans in the front out? Put them on the top and buy 3 new ones with rgb and put them in the front ( corner?
@PizzlesTechTime
8 ай бұрын
Oh no I just bought four sticks of 48 GB RAM... I will look out for issues with this when I'm trying to post my system.
@wilcovanamersfoort6744
10 ай бұрын
Are the standard font fans PWM? Great looking build. I am looking at buying this case for my sim rig.
@godlyboimaxx9240
8 ай бұрын
For some reason the bottom 140mm fans do not screw in
@Avian202
4 ай бұрын
Super useful
@TheProvokedPrawn
4 ай бұрын
Thanks. Hope you enjoyed enough to subscribe 🦐
@Avian202
4 ай бұрын
@@TheProvokedPrawn subscribed :))
@OGHawkeye
10 ай бұрын
i thought that the dominator platinums also had a cap exchange that makes it look like the old dominator with the "tetris" like rgb lights? am i wrong about that? it only comes with what you used and also the rgb-less heat sink ones?
@xtqz9195
10 күн бұрын
hey guys, i need some help. i’m planning on doing a similar build like this and i don’t know what extra parts i need. is it just the vertical gpu mount? thank you for this guide btw.
@TheProvokedPrawn
10 күн бұрын
All the specs are listed in the description
@xtqz9195
6 күн бұрын
@@TheProvokedPrawn ohh ok, thank you!
@charlieman8503
6 ай бұрын
Would I be able to retrofit 2 3.5" hard drives in this case? I really like this but have 2 x hard drives full of files
@CLBCrew96
5 ай бұрын
I just got this case. The cords that come with it have a cable that I can’t figure out where it goes. It’s the one to use the usb type c in the front. I have a b550 gigabyte arorus pro. Does my motherboard support it? Would love to use it for playing vr
@kevineureka6996
10 ай бұрын
So I just assembled this case from micro center and on first boot the included fans don’t didn’t light up on plug in nor did the 140mm nzxt I bought for the bottom. Does the addressable headers not work for these fans?
@davebond2381
4 ай бұрын
On the NZXT site it doesnt show the vertical mount compatible with the H6, clearly by your video it works fine. Unfortunately I can't find it in stock anywhere in Canada. I want to vertically mount my 7900xtx. Any other brand of vertical mount that you would suggest?
@djvoo19
9 ай бұрын
Great straight forward video, thank you. So useful. 1 Subscriber earned :-)
@TheProvokedPrawn
9 ай бұрын
Thank you!
@effinericsloan
9 ай бұрын
i hope maybe you can help me. i had ordered this case and started building but i got into a confused state. i couldn't figure out where one connector went. i've looked all over i don't know what it is. it's a black connector almost looks like usb with teeth on each side. i thought i saw you plug it into your motherboard but on mine i could not find where to plug mine in. its with the connector that you plug in beside the 24 pin motherboard connector. i could explain better with a pic. when you first open the back of the case it was on the bottom of the case with the connector to the motherboard. i feel like it's for old hdd connection.
@zCroFTW
10 ай бұрын
What do I do if I have no 5v RGB header? (MSI b450 gaming pro plus). I have got the case, put in everything and now realised I’ve no 5v header. Any suggestions please
@im_anoobmm
3 ай бұрын
i am going to get that case with a 360 mm aio and that comes with a fan hub and i'm getting the same 140 mm fans at the bottom and am connecting a 120 mm fan at the back of the case to that hub but what will i do for the front 3 fans will the motherboard have enough ports for it all? i'm getting the Gigabyte B650 EAGLE AX ATX AM5 Motherboard
@devsreejith5917
6 ай бұрын
Hey I have a question for the fans airflow side can I mount another fan behind the three fans in the case
@yosmch
6 ай бұрын
Can you switch CPU and PCIE (GPU) cables? For some reason the PCIE cables are daisy chained which does not look nice if you build a minimalistic PC.
@TheProvokedPrawn
6 ай бұрын
You don't have separate ones included with your PSU? An alternative might be extension cables (Cablemod) or Lian Li Strimers
@yosmch
6 ай бұрын
@@TheProvokedPrawn No single PCIE to PCIE cables unfortunately.
@tannguyen-dg8su
5 ай бұрын
will that video card fit not vertically
@SigmaShrek69
5 ай бұрын
Watch the video 😂
@V1pperrzz
6 ай бұрын
I just have one question do I need the fans for the bottom that you used or could it be a different brand?
@00PIHUM00
4 ай бұрын
How much does this whole build cost ?
@nikolasvel
8 ай бұрын
Thabk you for the vid. I do have a question if you can help out. Asus X570-P mobo doesnt have a 3.2 USB connection point on the board. I connected the supplied 3.0 USB connector to the board but dont know what to do with the additional 3.2 USB connector from the case. Do I need a 3.0 splitter and an adapter for the 3.2?
@arinzishan10
10 ай бұрын
You should put the T700 in the top m.2 spot becuase T700 is a gen 5 SSD.
@TheProvokedPrawn
10 ай бұрын
The board doesn't support gen 5. So it makes no difference
@Imhaxxz0r
5 ай бұрын
👏🏼🤙🏼 one question bro I have rog strix 4070ti and I wanna to buy nzxt H5 elite flow and im not sure if my gpu will fit .. can you help me ? Thanks
@TheProvokedPrawn
5 ай бұрын
No idea. Not seen the h5
@nickfair1908
9 ай бұрын
What do you have plugged into the CHA fan 1 on the bottom of the motherboard? Building my pc right now with the same motherboard and fan setup wondering if I’m missing something
@painexotic3757
20 күн бұрын
Bruh why doesn't anyone ever show what screws they're using. It's like they just assume we should know. This is like the 5th build I've watched of people doing this
@TheProvokedPrawn
20 күн бұрын
the manual has details on what screws are for what, but thanks for the feedback!
@painexotic3757
20 күн бұрын
@@TheProvokedPrawn Sorry I was just frustrated. This was my first build but I did end up using manuals to guide me lol. It took me like 5-6 hours to finish my build.
@jay.c2097
8 ай бұрын
Should I still buy the NZXT controller if I’m not running any rgb?
@TheProvokedPrawn
8 ай бұрын
You don't have to. You could connect fans directly to the motherboard if you have enough fan headers
@jay.c2097
8 ай бұрын
@@TheProvokedPrawn I ordered the NZXT N7 B650e motherboard and I think I saw that one has a good number of headers
@Galactica1201
9 ай бұрын
Do you think, noctua NH-U12A & vertically mounting XFX Merc310 would fit?
@Erotez
8 ай бұрын
I’m completeøy new to Pc and i just bought the h6 flow rgb with NZXT kraken elite 360 rgb + 2x 140mm NZXT duo rgb fans and a be quiet 120mm non rgb fan. What do you reckon i should buy to be able to Connect and control all fans? I know you mentioned hub etc but to me thats a foreign language
Пікірлер: 376