I have a concern with that replacement rotor you’ve put into it - it has a centrifugal fan impeller on it which is the wrong configuration for the vent in the bottom of that router, the original “Makita” rotor (that you found had a short in its commutator) has the “correct” axle fan on it for the position of the vent. - repair the “original” rotor/try to swap the impellers over for the correct air-flow to cool the motor ✅. In its current form, a risk of it overheating ⚠️
@user-sl3il5sz2s
2 жыл бұрын
No, with black plastic, this is not Makita. ;) There are nagging, but overall a good job.
@claymt26
Жыл бұрын
I have two kids that are 2 and 4. After they have ran me ragged.... These videos are my peace. Thank you and keep up the good work
@garymucher4082
2 жыл бұрын
Now you can do a video on repairing the defective old armature. They do sell commutators for that armature. Just a thought!.
@samuelfellows6923
2 жыл бұрын
And that the replacement rotor had the wrong type of fan on it for the position of the vent in the power tool - risk of it overheating ⚠️, if he can repair the original “Makita” rotor with the axle fan = he could put it back into that router and have the correct air flow to cool the motor ✅
@paulorth2251
2 жыл бұрын
Interesting piece of work, like the upgrade, seems to really made a difference. 👍😁🇨🇱🇺🇸
@RESTORATIONOFSCRAPMETAL
2 жыл бұрын
Excellent but little known router, cool project and excellent restoration buddy 👍
@Darkassassin09
2 жыл бұрын
The fan on that new rotor won't be functional in that case... This things asking to overheat.
@matthewhopkins666
2 жыл бұрын
That was what I was thinking the fan on the new one appears to be designed for side vents and the case is a top vent.
@samuelfellows6923
2 жыл бұрын
⚠️ - yes, he needs to repair the the original “Maketa” rotor that has the axle fan on it, or what I would have done = try to swap the impellers over so it has the correct air-flow to cool the motor ✅
@Austeration
2 жыл бұрын
Very nice job 👍 there will be no stopping you now. You will be finding all sorts of jobs to use it for.
@cardinalrestorations
2 жыл бұрын
That's some good work. Nicely done !
@ryanpage6635
2 жыл бұрын
This saved me pulling mine apart, thanks.
@JamesDeese
2 жыл бұрын
Really good work. Well done.
@yeagerxp
2 жыл бұрын
Nicely done 👍👍👍Thanks for sharing
@Cradley684
Жыл бұрын
Excellent friend, have a nice day !!!.
@robertovillalobos4798
2 жыл бұрын
Mejor que nuevo , excelente , saludos desde Venezuela ciudad de Maracaibo.
@MsJangot
2 жыл бұрын
Good job. But I didn't like you that changed the colour. Because makita should have a specific blue color.
@churlepatakha
2 жыл бұрын
Good one, nice and decent color selection.
@jimwhite5964
2 жыл бұрын
Nicely done... thanks!
@lars-akeisaksson
2 жыл бұрын
Fel färg på handtaget annars helt ok
@boyna1987
2 жыл бұрын
I thought you would rewind the armature. That's a great challenge to you for a future project. Nevertheless, nice job! Congrets!
@ahacpatb8736
2 жыл бұрын
Подшипники надо менять.
@-Deena.
2 жыл бұрын
Looks great! 🧡
@RestorationAustralia
2 жыл бұрын
Nicely done.
@restaurandocoisasvelhas
2 жыл бұрын
Dude, spectacular video. It was excellent my friend. I'm already your subscriber. Like for everything.
@myrestorations
2 жыл бұрын
Great result 👏 👍
@HueMongus101
2 жыл бұрын
Do you know if the body was cast from a magnesium alloy or something else?
@oscargomezmadrid289
Жыл бұрын
El cambio del rotor afectará a largo plazo el funcionamiento?
@jurgs18
2 жыл бұрын
You need some Japanese Industrial Screwdrivers (JIS).
@lolcec81
2 жыл бұрын
Комментарий в поддержку канала и ролика, а также труда мастера.
@lihan4537
2 жыл бұрын
I have exact same model. Bought almost new condition from local Sunday market for $10.
@vlajkozr
2 жыл бұрын
what is that white powder you put in warm water? some kind of detergent?
@ezequielsilva2709
2 жыл бұрын
Muito bom 👏👏
@lukeolinger6000
2 жыл бұрын
You should have cut out the shape of the thumbs up button. The wood piece you had was perfect for it.
@THCvlogs
2 жыл бұрын
I think replacing the cooling fan shouldn't be useless
@jonfeuerborn5859
2 жыл бұрын
Nice work on the guts. Questionable design choices. 🤔
@suzyhendrix
2 жыл бұрын
What are you brushing on at 9:57?
@harrygregory6227
2 жыл бұрын
what year is that router from?
@germanmatias5521
2 жыл бұрын
Hola, muy bueno, que es lo que usas en el minuto 10:00. Pintura, barniz...??
@romeovidalrodriguez7754
2 жыл бұрын
hola el video está muy bueno: 🤜🤛👍👏👊
@petricabistricean1806
2 жыл бұрын
super tare
@janjan42gt
2 жыл бұрын
dont solder the wires because under load the solder can melt again and so i could cause wire burning or something else next time crimp thw wires only
@robertobezerra8376
2 жыл бұрын
Show 👏👏🇧🇷
@IanSmithKSP
Жыл бұрын
That cut you made at the end, freehand - very very dangerous. You don’t want to make cuts like that without straight edge guide. Routers climb, and when they start climbing they climb fast
@Mindtramn
2 жыл бұрын
black handle on the Makita? not canon !!!
@FerSniper
2 жыл бұрын
Лучший!!! Спасибо за потраченное время!!!
@kuzzmenka
2 жыл бұрын
Oh, that's old router? So what WiFi name it has?
@user-me1us4ln5h
2 жыл бұрын
На ручку посмотрел думаю что за електрокружка)) а нет фрезер
@KazakovNik
2 жыл бұрын
The slats at anchor are already falling off: the anchor is to be replaced. Ламели на якоре уже отваливаются, якорь под замену.
@user-xr5py3zm1i
2 жыл бұрын
Цвет много значит в этом инструменте
@richardraynor7197
Жыл бұрын
a bit too much use of the hammer and impact screwdriver
@arnepauly2285
2 жыл бұрын
Next time just tape over the parts you don't want painted (eg. th outside that fits in the handle.
@amirpourghoureiyan1637
2 жыл бұрын
That's a weird looking Network device!
@rust_hunter7867
2 жыл бұрын
Yeah probably because its from the 60's. Networking technology was wild at the time
@flaman2011
2 жыл бұрын
Painting it blk isn't restoring it. It's altering it
@user-qz2ez7st7s
2 жыл бұрын
Да. В чёрном цвете, это уже не makita
@DatBlueHusky
2 жыл бұрын
wish you didnt paint away the makita colors, now looks like shit
@jabuticaba2000
2 жыл бұрын
should have changed / kept the old vent..
@budwoodman1716
2 жыл бұрын
Why on earth would you make your test cuts on PARTICLE BOARD ??????? Next time try it on a real wooden board !!
@user-jv5th8ld9u
2 жыл бұрын
👍
@franciscosalamanca8174
2 жыл бұрын
🇪🇨👍
@samuelgalera4672
2 жыл бұрын
Horrible quedó pq tienen la costumbre de pintar las máquinas cuando son de aluminio xd lo arruinan no se pinta lo aluminio tiene que quedar pulido y laqueada y los plásticos de color Makita también tiene que quedar del mismo color xd de última quedé laqueada lo único que se puede pintar es la marca sea Makita del mismo color que ellos se identifican xd por eso cada marca tiene su color xd una hermosa maquina arruinada y pésima restauración xd
@farouq1983
Жыл бұрын
3:20 Unbelievable! You should have not cut all that material from the commutator!
Пікірлер: 66