I worked on my honda for the first time and broke a bolt on the valve cover. Smh. Glad this video was made. I even listened to the same song just for extra luck.
@nelsonrimas5434
2 жыл бұрын
Same issue with honda car boss
@JDMSTRT
Жыл бұрын
Me im experiencing this hays 10 size valve cover bolts
@maynorcorderoportuguez317
Жыл бұрын
@@JDMSTRT qxx""""“0
@SumProject18
9 ай бұрын
Mine is on my Zero Turn's starter bolt 😑
@Dwigt_Rortugal
5 ай бұрын
📻 Another one bites the dust... (Tools breaking)
@adamariemehani9110
5 жыл бұрын
As a mechanic, I come across broken bolts often and spend crazy time to removing them. Your method, will work better than an extraction tool that often does not work. Thank you.
@murisec54
5 жыл бұрын
Gracias por su comentario, le invito a ver: kzitem.info/news/bejne/1IKinWGhcmVkZ44 SALUDOS
@nealios93
Жыл бұрын
Facts
@shaunatate7740
10 ай бұрын
Broke off 10-24 screw while screwing into aluminum. Didn't realize the hole I tapped was for a 6-32. I picked up the wrong tap lol. So screw broke off while screwing in. All other vids used screw extractors. Not a fan. Definitely gonna try this one.
@nealios93
Жыл бұрын
You're a lifesaver. I spent an hour using an extractor and this method took me all of 5 minutes. About to pick up a set of torx sockets
@franceslambouths5742
22 күн бұрын
Oh my goodness you Rock I had that screw out in less than 10 minutes best advice ever 💯
@joependergraft6593
Жыл бұрын
Worked like a charm, thank you!!! I had a broken bolt in the head of my 454. Used 7/64 for a pilot hole & then a 7/32. #27 torn & it came out as smooth as butter. You ROCK!
@Username-ng8jy
Жыл бұрын
Dude my lq9 in my truck. Got all bolts free. Then noticed a bolt was missing. Looked and shit is broken flush on my head. So 7/64 then go to 7/32 then t27?? Fuck. My engine is in place. I can remove the wheel well and gain access. Luckily I’m small enough to fit and work. I just have to remove heat shields. This shit has been lingering in my head since thanksgiving man lol
@gearoidclancy8451
3 жыл бұрын
Probably one of the most useful Videos on KZitem..... saved me a trip to the hardware store and the cost of a bolt extractor!
@bnrz28
3 жыл бұрын
Great vid and very informative. I had a similar situation with an exhaust bolt. What helped me was using a left hand drill bit. It hollowed out the hole as well as loosing it up. As soon as I put the easy out in the bolt it was loose enough to loosen by hand .
@user-fp1ol4gu9g
Жыл бұрын
pulled me out of a deep mess as i had a set of long torques all the extractors to short you vid saved the day many thanks
@Talha1396
2 жыл бұрын
This works like a charm! Just extracted two snapped manifold studs from my RB25DET head!
@skippr76kz
10 ай бұрын
Store bought extractors were not working. This method actually worked great! Thanks!
@rpg500e
Жыл бұрын
Just had to add my comment since this saved my ass. Had a speed sensor bolt that broke off in the steering knuckle. It was a fairly small 10mm bolt head to give you an idea. Used a 3/32 drill bit and a smaller T10 torx (figured I'd start there and go bigger if I needed). Didn't drill too deep for fear of not drilling perfectly straight, worked like a charm. Thought I'd throw my testimonial and numbers here in case it helps
@nathancof
3 жыл бұрын
I spent over 50.00 in Bolt Remover kits that didn't work, but this did. Thank you!
@ernestinebass4371
3 жыл бұрын
Cool! By using this method I should be able to drive the broken bolts that held my ATV's skid plate to the frame out by reversing direction and actually driving them deeper in until they come out the other side.
@FaiiryTaiI
3 жыл бұрын
Thank you good sir for this video. This video saved me. Had a broken bolt stuck in a valve cover. I managed to get it out. Thank you for your guidance. ✌️
@murisec54
2 жыл бұрын
Gracias por comentar le invito a visitar mi canal y compartir. kzitem.info/news/bejne/ondpn5tmb5uqaH4 saludos
@rogerdouglas6405
3 жыл бұрын
used this on spark plugs works a treat, saves loads time
@alaspablo4307
4 жыл бұрын
I did it and it work. Thank you for this video. Very helpful
@mikelee2419
Жыл бұрын
Thanks for this video!!!! I bought a ez out kit and it couldn’t get the bolt out but I used your method with a torx bit and it worked out better thanks again for the video 👌👌👌👍👍👍👍👍👍🙌🙌🙌🙌🙌🙌
@ArZer
3 жыл бұрын
Saved me from catastrophe . Thank you so much.
@airallen9411
11 ай бұрын
Bro i love you so much for this. Im a Machinist and ive been trying to get a headless thread out for like 2hrs. My shop doesnt have thread extractors, so i looked up your vid and it just saved my ass! Without your video, i wouldve had to scrap a $900 mutli inserted drill shank. Take my sub and like even if you never make another video
@luisbuenrrostro4529
2 жыл бұрын
Thanks! Just saved me so much work. Didnt even know that we could use those bits on a ratchet. Thanks
@murisec54
2 жыл бұрын
Gracias por comentar! Si le gusta la mecànica le invito a visitar mi canal. SALUDOS
@spirodrossos955
Жыл бұрын
very helpful!!! i have a broken pcv valve and the thread part is in the valve cover hole gonna try with torx bits
@ibgeorgeb
2 жыл бұрын
Wow! I’m going to try this method. Thank you. 👌🏾
@mr.x8391
3 жыл бұрын
Simple dude with a simple toolbox getting it done. 👍
@murisec54
3 жыл бұрын
kzitem.info/news/bejne/loSb3qGgmoN2mm0 Le invito a ver y compartir. SALUDOS
@traceymillington1949
5 жыл бұрын
I have a bleed valve snapped off in the caliper. Most videos say weld a nut on the end. I can't weld so hopefully this approach will work. Thanks for the vid
@murisec54
5 жыл бұрын
enter my channel you can find the solution
@mkai8978
4 жыл бұрын
Same situation happen to me now. How about yours? Can you extract the snapped screw?
@kkkalvarez5137
4 жыл бұрын
Lol.... happened to me too..... i said to hell with that and bought a new caliper instead.
@taterthot1184
3 жыл бұрын
Happened to me a while back we fixed it by plugging it with a nail lol
@psmith1349
4 жыл бұрын
Hell, might as well give it a try. I ain't done nothing but screw it up so far.
@DavidNovaa
3 жыл бұрын
Nice one
@tylerconley3433
3 жыл бұрын
Exactly where I’m at lmao
@jio7270
3 жыл бұрын
Bro im changing the fucking brakes on my car and the caliper bolt head snaps off😐
@wildside1951
2 жыл бұрын
@@jio7270 Im trying to change my wheel cylinder and the T8 Torx bolt got really rounded cause I wasn't using the right size like an idiot then I tried using other types of sockets now im fucked. Beatin the shit out of it with a punch
@jio7270
2 жыл бұрын
@@wildside1951 see if its a torx head, go up a size or two, in your case a t10 would probably be best, but put the bit on the head roughly in the same pattern and beat the hell out of it until you fit the bit in there, that usually helps me undo a stripped torx screw
@josephguzman2375
3 жыл бұрын
Right on brother good hack. Use this on my John Deere lawnmower and it came out just perfect didn’t even have to go buy a kit thank you brother!!!👍😎
@murisec54
3 жыл бұрын
thanks for comment If you like mechanics, I invite you to visit my channel kzitem.info/rock/PP14v9RHOnCif52XqhGZ0gvideos
@josephguzman2375
3 жыл бұрын
I will brother thanks for the info stay safe
@SoundLabMusic
28 күн бұрын
Thank you worked a treat, saved me from a massive mess
@snipezgreased6952
2 жыл бұрын
Best video on KZitem for this.Straight to the point and also have good music
@chuckford4393
Жыл бұрын
What is the song I like the music also
@naijakem
2 жыл бұрын
Thank you for posting. Going to give this a try.
@JAWBR3AKER79
3 жыл бұрын
Thanks brother this helped me. Easy out wasn’t working for me. I’m so happy 😁🤙
@ELEVOPR
10 ай бұрын
OMG you came so close to fooking up your inner threads, Thank God you didn't or this would of been another video. Good stuff, Thanks for sharing.
@SpelunkaTV
4 жыл бұрын
Thank you so much, im from Brazil It worked
@learnandteach.108
3 жыл бұрын
Thats awesome, I was figuring out how to deal with such bolt. Thanks 👍
@yousufmusthaneer9738
3 жыл бұрын
Mine is small bolt sand I guess I can't drill its like ,,8 mm Dia bolt in KTM ',s oil filter side cover
@learnandteach.108
3 жыл бұрын
@@yousufmusthaneer9738 Do as he did, use 3mm and then 4mm, and don't forget to use lubricant before final step of removal.
@maikolim37
3 жыл бұрын
Excellent video! Thanks!
@iamGrowing
Жыл бұрын
This worked for me perfectly. I used a smaller size drill bit and a smaller size torx.
@michelesportelli9021
2 жыл бұрын
Very good, the best and simply solution that j've saw just until now.
@murisec54
2 жыл бұрын
kzitem.info/news/bejne/xZWlzqyHjV9enJg Le invito a ver. Saludos
@EXPENDABLE50
4 жыл бұрын
You are a life saver. This was the cheapest most effective method.
@omarsalamah2359
4 жыл бұрын
well done. Fantastic work.
@Moctify
4 жыл бұрын
Got a new sub cuz I just came across this problem 😂😂
@bahtjarkarpuzi9846
5 жыл бұрын
Thank you Mr.!
@123rickdicky
5 жыл бұрын
Worked like a charm! Thx sooo much!!🙏🏽🙏🏽
@murisec54
5 жыл бұрын
thank you for your comment I invite you to see and share: kzitem.info/news/bejne/loSb3qGgmoN2mm0 I'm from Catalonia, I like to share my little experiences, if you like enter between channels, you will see funny situations REGARDS
@4leafmetal
3 жыл бұрын
That was very satisfying to watch.
@EduVentiladores
20 күн бұрын
Excellent video
@MPjustaman
2 жыл бұрын
Nice.I definitely feel better just knowing some one else had success.
@WitcherDAD
3 жыл бұрын
yes, I was doing that way 20 years ago before came out first extractors on the market :)
@nekrasovnikolay2883
3 жыл бұрын
Yes, man! Many tools come to make working easier. In 2000 I was working as a mechanic and did it same way. Now I'm saling car repair tools including screw extraclors. kzitem.info/news/bejne/jn98r3utk5Wcp2U The only problem of TORX, if finally it will get broken inside hole it will be double trouble to extract it. So, doing this way should be very carefull with the torque you use for unscrewing.
@AntonioCarlos-jt1yv
Жыл бұрын
valeu muito a dica, retirei o parafuso com muitissima facilidade, parabens e muito obrigado
@MuslimTours
4 жыл бұрын
Videos like these is why i love youtube
@murisec54
4 жыл бұрын
Thanks for commenting, I invite you to visit my channel and see. Cómo sacar extraer un tornillo perno roto partido en lugar difícil. SALUDOS
@MrAssassinash
4 жыл бұрын
so satisfying to watch it unscrew
@Amtz900
3 жыл бұрын
Good job thank you for sharing
@diamondharris4963
5 жыл бұрын
It work perfect, thanks and I did subscribe to your channel.
@Johnwilliams-yi9xc
8 ай бұрын
I thought I've seen it all ,good one.
@Bossmobbin88
3 ай бұрын
Man listen you just saved me so much money bro 😂 thank you for that hack 🙏 🙌
@rickydakin4737
Жыл бұрын
Thanks man helped a lot had to use a different bit but same idea
@alanbrandywine8356
4 жыл бұрын
No no no. Must use left turn drill. I have had them spin out before using easyout. A right turn drill drives in further.
@dannylawson6080
5 жыл бұрын
I going trying it but slightly smaller broken bolt. That one thing I dislike when tightening a Bolt it seems not to be tightening but all the of a sudden u hear a Tink.
@adekunleogunlana4380
2 жыл бұрын
I tried it and it work as described, awesome 😎
@arai6147
3 жыл бұрын
mine hasnt broken in a flat manner. gonna try this anyway. good vid
@vishnucp476
8 ай бұрын
Is it possible to remove broken glow plug by this method??
@jeanfrancoislebon3378
Жыл бұрын
Bonjour et merci énormément sa ma sauvé la vie vraiment le top vous êtes un génie bonne continuation merci encore
@billdyer8431
2 ай бұрын
I used this method with limited success using an impact rated T30 bit. While trying to remove one broken stud which was below the surface, I managed to snap off the end of the bit. I just happened to have a 7mm diamond core bit handy (about $8). While time consuming, I was able to drill and expose enough of the broken bit to remove it. Hope someone finds this rescue tip helpful.
@johnny_nico
3 жыл бұрын
You just saved me time, aggravation and money... Worked like a charm, thank you!
@murisec54
3 жыл бұрын
kzitem.info/news/bejne/ondpn5tmb5uqaH4 Thanks for comment. I invite you to see my videos share them. Greetings
@meshimangi6824
2 жыл бұрын
your method is much better, i think. I will try using it. thanks
@neshifuturo
Жыл бұрын
I did this method not even seen this video, works well
@armanchannel84
3 жыл бұрын
Wow good tutorial👍
@BERZOprojects2022
7 ай бұрын
What is the diameter of the broken bolt
@kizilkurt4862
5 жыл бұрын
Good tactik dude
@chassdesk
2 жыл бұрын
Worked great cheers 🍻
@bruteforce6570
3 жыл бұрын
Thanks man your video helped me an my brother a lot 👏👏👏you are awesome 👏👏👏
Gracias por comentar le invito a ver: kzitem.info/news/bejne/loSb3qGgmoN2mm0 Si ha sido de su interés puede a suscribirse a mi canal, gracias y. SALUDOS
@jimmymifsud8353
4 күн бұрын
Yes it worked first go ! Thankyou !
@NuclearShot
3 жыл бұрын
Worked me for, thank you so much!
@murisec54
3 жыл бұрын
kzitem.info/news/bejne/ondpn5tmb5uqaH4 gracias por su comentario, le invito a ver i compartir SALUDOS
@ricardovelez958
3 жыл бұрын
I will try this on my brake caliper bolt that broke on my knuckle 😢 thank you very much
@ibcrenacimiento7478
9 ай бұрын
Excelente idea! Gracias!
@juanmanuelfrancobyrne
4 жыл бұрын
Gracias por este vídeo, resolví lo de un perno roto igual al del vídeo y salió fácil
@murisec54
4 жыл бұрын
Gracias por el comentario. Le invito a visitar mi canal y suscribirse. SALUDOS
@bryanjudesombrado6093
Жыл бұрын
Very useful. Nice. Very infomational.👍
@timyong6152
Жыл бұрын
Getting broken bolts out is so satisfying
@bigrob351
3 жыл бұрын
Awesome...quick and to the Point
@murisec54
3 жыл бұрын
Thank you for your comment, if you like the mechanics, I invite you to visit my channel and if it convinces you, I encourage you to subscribe. Greetings from Catalonia
@JimmyPtheman
3 жыл бұрын
Sweet jam
@Photostudioww
3 жыл бұрын
Great idea 👍
@ethanphillips45
4 ай бұрын
Any specific metal bits you like using
@Quasicrystal37
Жыл бұрын
Best part about this technique is that it can be applied to left and right-handed bolts.
@claudiodaxrepereira4779
5 жыл бұрын
Very good. Malaco of Brazil
@murisec54
5 жыл бұрын
Claudio Pereira Gracias por comentar Salut SALUDOS
@SA-jz6pb
5 жыл бұрын
Great job, bouna idea bravo.. bravo...
@murisec54
5 жыл бұрын
gracias por comentar SALUDOS
@joshuamoore1091
3 жыл бұрын
Going to try this tomorrow
@danceswithaardvarks3284
4 жыл бұрын
That looks like it will work for the problem I have. Thanks.
@danceswithaardvarks3284
4 жыл бұрын
Lucked out. The screw was not in a blind hole and came out when drilled. Thanks for tip anyways
@murisec54
4 жыл бұрын
Me alegro tuviera poca dificultad. Gracias por su comentario. Le invito a visitar mi canal. SALUDOS
@lazydayhohum
3 жыл бұрын
I need to fix my car but I can't stop grooving to the tune man !
@ricardovelez958
3 жыл бұрын
Lol
@chrisspears4302
Жыл бұрын
Thanks brother you saved me money and time
@foxjason6893
2 жыл бұрын
DANKE DU BIST DER KING HAT GEHOLFEN SEHR GEILE ZAUBER TRICK IT S MAGIC JEAH YOU ARE THE KING
@Bonerite
Жыл бұрын
Hell yes this video saved me big hubk of time and money. 66 Dollars to be exact. Bless
@hyderabadpkexplorer1556
6 жыл бұрын
very useful
@rubenr.otanez8037
2 жыл бұрын
Excelente idea 💡 👍 😍
@karinaferreira6663
4 жыл бұрын
Não tô conseguindo tirar parafusos do compressor de ar direto ele nunca foi aberto e nunca teve manutenção e eu já espanei todos os parafusos de tanto tentar tirar porque eles estão bem emperrados que nem se me chamou. .alguém me da um dica que funciona
@mastergarza2878
3 жыл бұрын
Finally what I was looking for but got no dam drill damit
@brennenhammer2415
3 жыл бұрын
Ommggg fr
@jrondyer1049
2 жыл бұрын
I am curious as to why threads that clean would have caused a bolt to snap from extraction?
@patrickhoule6818
4 жыл бұрын
Yes ! J'ai pris cette méthode et c'est super et simple et marche super bien
@murisec54
4 жыл бұрын
Gracias por comentar si le apetece puede visitar mi canal. SALUDOS
@udolucas7490
Жыл бұрын
Thank You so much. 👍🏼
@murisec54
Жыл бұрын
kzitem.info/news/bejne/ondpn5tmb5uqaH4
@joenucci5369
3 жыл бұрын
HOLY $HIT I LOVE YOU!!! THIS LITERALLY SAVED MY ASS.
@murisec54
2 жыл бұрын
kzitem.info/news/bejne/loSb3qGgmoN2mm0 Le invito a ver y compartir. GRACIAS Y SALUDOS desde Catalonia
@driver4818
3 жыл бұрын
Best video Ever! Worked 4 me!
@dincaadrian6851
4 жыл бұрын
Hola ,que tal?Quiesiera preguntar que marca de torx esta utilizando para sacar los tornillos?
@murisec54
4 жыл бұрын
www.amazon.es/dp/B07Z628TRZ/ref=cm_sw_r_cp_apa_i_hZDREb9T078FZ Gracias por comentar si le apetece puede visitar mi canal puede suscribirse es gratis· si lo hace no se olvide de darle a la campaña. SALUDOS
@ivanreis1538
5 жыл бұрын
VERY GOOD!!!
@murisec54
5 жыл бұрын
GRACIAS por comentar te invito a ver: kzitem.info/news/bejne/loSb3qGgmoN2mm0 SALUDOS
@murisec54
5 жыл бұрын
Gracias por comentar. Si te apetece puedes ver este otro video, kzitem.info/news/bejne/mZyHsmGGa2KajKg SALUDOS
Пікірлер: 401