The 292 is one of my favorite engines ever. I have had two of them in C60 trucks for many years and never had a problem with them.
@patrickcannell2258
3 жыл бұрын
I also like it's competitor, the Ford 300. Both great.
@jpsolo6910
3 жыл бұрын
Brother, these are great videos, specially when you know what ur talking about!. I own a 1960 chevy with a 235ci, 6 cyls that I've been rebuilding since about a year, it's a lot of precise work involved, not only wrenching. And time nd $$$ consumed.
@jpsolo6910
3 жыл бұрын
Keep up the good work, nd keep em videos coming. Thank you for passing on good information.
@charliehill995
3 жыл бұрын
I've been waiting to hear and see that 292 running. Wow, what a great job you did on that engine. This and the rest of your videos are as entertaining as they are informative. I just don't understand how you can work in a nice, roomy place without having to search for the proper tool(s): something I wouldn't know about. The little commercials are fun to watch and your points on faith are right on. God bless you and your family.
@markhenderson4194
3 жыл бұрын
The best breakdown and rebuild video I’ve ever seen! The ultimate how to video! If I ever need an engine rebuilt your the guy I’d hire.
@TheJayhawker
3 жыл бұрын
thanks a lot, and thanks for watching!
@henrytupper6959
Жыл бұрын
Like your SB lathe too. Mine is an 11” but short bed. 67 G10 van, 250.
@phil4677
3 жыл бұрын
High compression is a beautiful thing. A double edged sword, starter draw-dwell-timing-base carb settings-all gotta be right(or close enough). This was as exciting to watch as Jimmy Stewart feeding the last shotgun shells into the jury-rigged engine from a crash-landed Fairchild C-82 Packet cargo plane in "The Flight of the Phoenix" (1965). Great wrenching.
@TheJayhawker
3 жыл бұрын
Thanks a lot! I love old movies (big surprise) and I know " The Flight of the Phoenix" well! Great movie.
@deborahchesser7375
2 жыл бұрын
If they didn’t get it running on those last shells it was game over. And they weren’t happy when they found out the engineer had only designed model planes, cool movie
@chuys53chevytruck60
3 жыл бұрын
I cant wait for my 250 6 cylinder i had rebuilt that i am putting in my 53 chevy truck to get started for the first time ... great videos🙌
@Volfandt
3 жыл бұрын
One of the great joys in life, congrats.
@richardlucy3822
2 жыл бұрын
Very cool 😎
@foreverwood1963
3 жыл бұрын
Now do mine please. Excellent job!
@that86fiero
3 жыл бұрын
I have a 66 stepside with the same motor, I plan on fully restoring it so then when I'm around 25 I can drive a fully restored truck made way before I was born
@sarkisbarkil867
Жыл бұрын
well, as usual it's a very good job, but I prefer to adjust the engine r.p.m on 650 r.p.m not 500 r.p.m the reason why is: the air filter will cause a resistance which prevents the air from passing through the carb easily as u did without an air filter ... what's ur opinion ??? thanks a lot for you called for the mind this engine from the good time .. go a head
@johnkozero6842
2 жыл бұрын
Nice 👍👍👍👍👍💯
@howtoguroo2686
3 жыл бұрын
I HOPE I HAVE GOOD LUCK BUILDING MY 292 ,THANKS
@maggs131
Жыл бұрын
stop yelling 😒
@57bugman
3 жыл бұрын
hello, just ran across this channel a few episodes back, and love it. been thinking about doing a 292 build in the near future, myself. looking at putting the clifford upgrades on it, but noticed no one sells cranks, or stuff like that for them. do you happen to know of anyone off hand that make a performance crank for these? thanks in advance
@swflmotorsportsfan6667
3 жыл бұрын
nice videos
@russelltrupia4479
3 жыл бұрын
Been waiting for this, it sounds great, does it have to use real gas or can it run on the unleaded. Omg what happened to that heater core.Great job looking forward to upcoming videos.
@wymple09
2 жыл бұрын
GM made a damn good six. I never did like that 2000 RPM break in, always preferred a little less on an unloaded engine. Best break in to me was a short cruise.
@SOLDOZER
2 жыл бұрын
Yeah, just drive it and slow cruise.
@BG-pd6os
3 жыл бұрын
lets go for a drive!
@marcogamez3350
16 күн бұрын
Do u know where I can get the gas lines for the carburetor? I have a 1965, Sam engine.
@fr4nheick491
3 жыл бұрын
Excellent videos I'm looking for a 292 And see If someone makes shipments to Argentina for a company It would be very good a Greeting
@marcogamez3350
7 ай бұрын
I wanted to see how u adjust the timing..
@Thirteenhands
2 жыл бұрын
And how long was the rebuild?
@maggs131
Жыл бұрын
Till it was finished
@Thirteenhands
2 жыл бұрын
Wha was total cost for this rebuild??
@TheJayhawker
2 жыл бұрын
Do you mean the engine alone, or everything I did on the truck? As for the engine itself I had the machine shop order all the parts I needed to rebuild the thing because they get better prices. I would have to look it up to be exact but I paid them around $1500 for the block machining and parts. I did all the labor otherwise including the cylinder head.
@Thirteenhands
2 жыл бұрын
@@TheJayhawker yeah I just meant the engine. I have a 250 I’m rebuilding and I like the fact you kept everything original in this build. I want to do the same with mine. I will be following this video series when redoing my 250!! Thanks for what you do! Great information for people like myself! (Not a lot of experience)
Пікірлер: 34