Thanks for the 2 videos just put them on my 2024 Vulcan classic LT. wife can’t wait to try them
@N1834J
4 жыл бұрын
Thanks for the video; it was extremely helpful, and I found a photo of the floorboards on the rh side installed; the long bolts connect to the exhaust side with the long spacers; and the short bolts with short spacers on the other side.
@jaybird1837
4 жыл бұрын
Wayne, thanks for the video. It was a life saver. The instructions are absolutely worthless. I to also found out about the mount bolts. But, I figured it out by carefully looking at the picture and part numbers. Kevin is right about the placement of those bolts and spacers. If u just use the original bolts the floorboards will rub the coverings. Thanks again the videos were well done.
@john-xc3iy
Жыл бұрын
I can look at drawings, without reading the words 99% of the time and assemble almost anything successfully. I came here to verify what I thought the correct way should be on my 23 model Classic. Kawasaki gets low marks for their instructions on this bike so far....
@davidhall7532
3 жыл бұрын
Thanks so much, I am just about to do the changeover and you have made it easy for me. Cheers from Perth Downunder
@stevieteeesadvfnq7381
2 ай бұрын
Hi David. Where did you get the floor boards from to fit the classic. Do you have a link or shop or part number please . I'm in Cairns Queensland. Cheers Steve
@marknoe4244
6 жыл бұрын
This and the previous are very helpful. I agree that the installation instructions are nearly worthless, but something I learned; you need to use the new allen bolts provided especially on the exhaust side to extend floorboard beyond the exhaust pipes. I figured this out from the LH/RH Collar remarks, not from the instructions. If you flip the floorboard up and down during install you can also bolt it on after attaching step to holder.
@PaulHSmith-bp6kx
2 жыл бұрын
The long bolts and long sleeves in the new floorboard kit go on the right side of the bike, and the short bolts and short sleeves go on the left side. The instructions specifically say not to use the bolts from the pegs.
@hudsonrilke
9 ай бұрын
Good job. Looks a bit complicated. Like em
@jasonshapiro4895
2 ай бұрын
Crap, i watched the install video first. Oh well, such as life. Thanks man and yes the instructions from Kawi are terrible.
@williamfletcher1008
2 жыл бұрын
Wayne, what brand of seat do you have?
@waynegarrison1
2 жыл бұрын
That is a Mustang brand seat.
@williamfletcher1008
2 жыл бұрын
Also what brand of crash bars?
@waynegarrison1
2 жыл бұрын
I put those on about 7 years ago. I can’t remember what brand those are.
Пікірлер: 15