Perhaps the most beautiful bodyboard made with my hands is a developing house.
Perhaps this is not the most beautiful bizibord in the world, but it is certainly the most beautiful bizidomik made by my hands. You’ll be able to make the same carnival bizibord.
All links to materials, drawings of bisidomics and layouts of stencils can be downloaded for free on my website.
☑ Open the page of Bizidomics - 1000ss.ru/servi...
✂︎- - - - - - - ✂︎ - - - - - - -✂︎
☑ My VK group - - vk.com/diy1000
What you need to do a do-it-yourself board
Buy plywood sheet 10 mm thick. Open the sheet with a circular saw according to the drawings that are on the site 1000 DIY’s And Advice Cut the doors and clocks with a jigsaw. But, it is better nichrome thread through a step-down transformer. He made all the figures and square gears using stencils. Printed out .... glued with clerical glue and cut with a nichrome thread and a step-down transformer. In more detail, the whole process is shown and described in a video about gears. Rez nichrome is very thin and neat. Labyrinth, airplane and car tracks. I had to go through a manual fraser. Then he took off the stencils and cleaned up the remains with an orbital machine. The ends of the geometric figures were cleaned with sandpaper by hand. The longest thing I did with my own hands was elements of the slide. After all, I had to get the most beautiful bizibord made by my hands.
Everything had to be cut, cleaned and glued. At first I planted side parts and the inside on PVA ... Then, using clamps, I adjusted the optimal position of each element of the slide. After which he planted in PVA. While the hill was drying, he took up the roof. These are the same square gears. If it is possible to print on a 3D printer, print it. Because otherwise you have to tinker. Although, such a cool homemade is worth it.
Hourglass made from a bottle. I cut it in half and made two half-cones which I later planted on liquid nails. The walls of the bisidomics and the roof were painted with silver and greenish automotive metallic, all other figures were painted with spray paint from spray cans. It is cheaper. Lastly, before assembling, I shot pockets with a stapler and reinforced with thin plywood. The bisidomics frame is collapsible. He pulled it with metal corners, put it on the bolts .. Video from the last stages of assembling the most beautiful do-it-yourself do-it-yourself board was unfortunately lost. But, there is nothing complicated in the assembly. I hung the curtains, loops ... Double-sided tape has already been pasted on the LED tape. The paint of the roof of the bisidomics holds well. Clock hands made of plywood. Between the arrows put the washers and put on the screw. I printed the dial and other little things in the nearest printing studio on a self-adhesive film. Mock-ups can be found on 1000 DIY’s And Advice. The total weight of the bisidomics is about 15 kilograms. Too much of course, but there is a margin of safety. And the confidence that the child will not turn him over. The developing house turned out to be very cool. Perhaps this is the most beautiful body made by my hands, in other words, a cool homemade
I remind you that in the next video we will melt glass bottles and make plates of them.
That's all dear friends. Now you know how to make the most beautiful bodyboard with your own hands. The video was prepared by the author of the channel 1000 DIY's and Advice - 1000 DIY and TIPS. I hope you appreciated how cool this developing homemade homemade house is.
✂︎- - - - - - - ✂︎ - - - - - - -✂︎
💰 How to make money on Aliexpress - ePN Affiliate Program - ali.pub/2ubyb4
Негізгі бет Perhaps the most beautiful lifeboard made with my hands is a developing house
Пікірлер: 119