The final step before firing it up! ...unless I've forgotten something or find a huge leak, so I'd say it's time for fluid fills. PARTS: All the silicone hoses & t-bolt clamps from Vibrant Performance, all the mandrel u-bend pipes from Summit, & the "Jobber Do" bead crimping tool is from Ebay.
@smallblockfuelie
5 жыл бұрын
I’ve thoroughly enjoyed this series. I’m excited to hear it fire and see it move.
@Tinker1837
5 жыл бұрын
@@smallblockfuelie Been well over a year hearing this engine run, let alone driving the truck... so me too! I think it'll be a great sound :D
@smallblockfuelie
5 жыл бұрын
Tinker and the guy who HATES your other ride will be happy. 🤪
@karlososorio2960
5 жыл бұрын
Tinker finally !!!! 😭😭😭 someday My Range Rover Classic will be Diesel too
@samroy8628
5 жыл бұрын
Yes yes YESSSS
@TheRebelOne.
5 жыл бұрын
A supreme fabrication job. Better than factory. Well done👍
@Tinker1837
5 жыл бұрын
Thanks, it was fun for a relatively simple job.
@MbanziSD
5 жыл бұрын
Love the nod to AvE with the t-shirt!
@Tinker1837
5 жыл бұрын
Hopefully all this work keeps the schmoo where it belongs.
@MbanziSD
5 жыл бұрын
@@Tinker1837 Nah that's some excellent fabricobbling there
@Tinker1837
5 жыл бұрын
@@MbanziSD Thanks, can't wait to hear it chooch!
@atoieno
5 жыл бұрын
They say that God is in the detail. Plenty of godliness there!
@Tinker1837
5 жыл бұрын
Thanks :)
@jasonvenegas8264
5 жыл бұрын
Almost done tinker !!!!! Woooo I am very excited to ear the first fire it up
@Tinker1837
5 жыл бұрын
Same, so close!
@gaboonviper85
5 жыл бұрын
Dude the anticipation is killin me!
@Tinker1837
5 жыл бұрын
Same! I'm ready to hear that turbo sing it's song.
@gaboonviper85
5 жыл бұрын
@@Tinker1837 you already dun started it didnt you lol
@gaboonviper85
5 жыл бұрын
@@Tinker1837 you're holding out! I forgot....is that turbo a Borg?
@Tinker1837
5 жыл бұрын
@@gaboonviper85 Wish I was! Been gathering up all the fluids the last few days. That's a Holset "Super" HX30W turbo, tricky to get your hands on, but just about perfect for a big single.
@gaboonviper85
5 жыл бұрын
@@Tinker1837 oh ok that is a good turbo for sure.... what's your power goal?
@mrAudisubaru
5 жыл бұрын
It"s really enjoyable to watch this kind of work that you do. What amazes me is how you think about every single detail in the build process.
@Tinker1837
5 жыл бұрын
It slows me down but it's fun to fiddle around with all the details the way I've always wanted to.
@phx_obs117
5 жыл бұрын
Damn that engine bay is looking good!👌
@Tinker1837
5 жыл бұрын
Starting to look like it wants to start up!
@yjmsrv
5 жыл бұрын
Wow- that was an ancient reference- the warriors- and I got it!!!! Now fire that F*@K3R up!
@Tinker1837
5 жыл бұрын
Glad a few people got it & hell yeah you bet!
@حمودعواجي-ت8م
5 жыл бұрын
هذا رجل يشتغل بمهارة وصدق و أخلاص وكأنه يرسم لوحة...ياليت الناس كلهم مثلة
@Tinker1837
5 жыл бұрын
Thanks!
@wheelitzr2
5 жыл бұрын
The X's on the test joints!! I'm in stitches!!!
@Tinker1837
5 жыл бұрын
It works a bit better with zipties... Ha!
@MrEyad1990
5 жыл бұрын
You wont find this level of qualty work anywhere . You inspire me . Great work .
@Tinker1837
5 жыл бұрын
Thanks! Definitely pushing my level of work on this project.
@gafrers
5 жыл бұрын
Old reference at the beginning but worth the laugh and fitting. Another great video. Cannot wait for it to start.
@Tinker1837
5 жыл бұрын
My best intro ideas end up just randomly happening like that haha!
@roversteve53
5 жыл бұрын
A work of art, I am not sure I could bring myself to drive it in the MUD!!!!!
@Tinker1837
5 жыл бұрын
I probably shouldn't be so picky with something that's going to get used hard.
@michaelhutin5451
5 жыл бұрын
Another example of your great attention to detail, workmanship and video skills. Love the grease/rubber nibble idea. Your going to have a huge power bulge on the bonnet, or hood as your may call it.
@Tinker1837
5 жыл бұрын
Thanks :) Yeah it'll save the skin on your hands & I've had fasteners come apart like butter even after 5+ years of salt roads & offroad running. I've got an idea for the bonnet, something from the muscle car era 😎
@_Hangman
3 жыл бұрын
Love the greasing the exposed threads on the hose clamps then covering with rubber cap trick. As a big believer of using anti-seize it's the perfect way to keep them rust free.
@Tinker1837
3 жыл бұрын
Right, and saves your hand getting sliced up when wrenching in there! That's a trick I learned from the offroad world that I'll always use if I can.
@notj5712
5 жыл бұрын
I'm SO glad I only found this channel yesterday. I've watched all 34 Disco episodes and I'm not going to have to wait long for the first start! :D
@Tinker1837
5 жыл бұрын
Haha! Good timing for you, & I'm sure there are a bunch of people getting impatient with me by know :P
@PavelowGunner1122
5 жыл бұрын
That AVE shirt is the Cockford Olly! She's a skookum choocher, I'll tell ya what
@Tinker1837
5 жыл бұрын
I'm trying to channel it's power to keep all the schmoo in where it belongs with these pipes.
@67bajabuilder
5 жыл бұрын
aaaahhh the rubber caps.... who does that ? .....Nobody that's who, you are doing an excellent job.
@Tinker1837
5 жыл бұрын
It has saved my butt more than a few times with offroad builds, & thanks!
@dubfalcon4489
5 жыл бұрын
That pipe tool is amazing
@Tinker1837
5 жыл бұрын
Sure is, so simple!
@crashwrench
5 жыл бұрын
Oh yeah , love the pipe bead making tool !👍👍👍👍😍
@Tinker1837
5 жыл бұрын
Thing has paid for itself several times over at this point :D
@RobertLowery
5 жыл бұрын
I wasn't liking the block in Cummins Beige, but now that you have the pipes painted I have changed my mind.
@Tinker1837
5 жыл бұрын
Same! Coming together now with the black & beige.
@guyemmott4009
5 жыл бұрын
Have been throughly enjoying enjoying all your video content and eagerly await the arrival of the next posting. Keep up the content and style. Great fun! Can't believe there are just over 10K subscribers.. Come on everyone !!
@Tinker1837
5 жыл бұрын
It's been weird trying to find a balance between informative & entertaining... that & actually getting work done haha! Blows me away that there are anywhere near 10k let alone more than that now 😮
@cbrando190
5 жыл бұрын
“WARRIORS... coooommmmeeee ouuuttt and plaayyy!” Awesome!
@Tinker1837
5 жыл бұрын
Caaaan youuuu diiiig iiiiit haha
@Cchange4us
5 жыл бұрын
You see the difference between you and me is that i would have become impatient by now, done stupid shit and fired it up and wrecked something haha. Wow though, great work... like always.
@Tinker1837
5 жыл бұрын
Oh don't get me wrong, it's taking every drop of self control I have to not do just that!
@diywrenching4072
5 жыл бұрын
seeing this makes me more confident in my charge pipe routing for my turbo 4runner as it won't require any bends thank god lol.
@Tinker1837
5 жыл бұрын
Nice! Which engine? Yeah I thought it was going to be much worse, but was really happy it only needed real simple pipes.
@diywrenching4072
5 жыл бұрын
@@Tinker1837 Thanks! and its an 06 so it has the 1gr-fe v6. I actually just got all of my custom exhaust back from my welder and installed it today. I went with a rear mount setup but this will supposedly be the first one thats been turbo charged, as you might imagine its a lot of research and learning along the way. It sounds amazing lol. I'll be posting a video in the next few days
@Tinker1837
5 жыл бұрын
@@diywrenching4072 Oh yeah I feel you on the research & learning bit, but then again being one of the 1st to try someone is pretty fun. I bet it does sound fantastic! I'll keep an ear out for it 👍
@tab5812
5 жыл бұрын
Thing looks bulletproof. 👍
@Tinker1837
5 жыл бұрын
Lots of work but well worth the effort!
@otavioraats
5 жыл бұрын
Super well done video! Great stuff! Waiting for the next ones! Greetings from Brazil!
@Tinker1837
5 жыл бұрын
Thanks! Next one very soon I hope :D
@williamwhitted2490
5 жыл бұрын
I can’t wait until it runs! Watched the whole series, and now I’m going back to subscribe and give it all a thumbs up!!!
@Tinker1837
5 жыл бұрын
Same here, very exciting :D
@thevintagestitchgarage5524
3 жыл бұрын
You sir are truly a craftsman. Thank you for the video.
@Tinker1837
3 жыл бұрын
Thanks and glad you like!
@dbrown4bbl
5 жыл бұрын
Am I the only person who picked up on your derisive Warriors chant? Game Six kicks of in a couple hours! Go WARRIORS!!
@Tinker1837
5 жыл бұрын
Haha that was an old movie reference but hey that works out!
@rjl110919581
5 жыл бұрын
THANK YOU FOR DETAIL VIDEO ON BUILD DISCOVERY
@Tinker1837
5 жыл бұрын
You are very welcome!
@asandberg6
5 жыл бұрын
Love the warriors, good movie.
@Tinker1837
5 жыл бұрын
A classic!
@MrDavidelliottjr
5 жыл бұрын
This was fun to watch. Thanks. And well done
@Tinker1837
5 жыл бұрын
Glad to hear it :) I try & keep it entertaining while getting work done.
@roughcountry158
5 жыл бұрын
this is a sick build cant wait for it to fire up.
@Tinker1837
5 жыл бұрын
Thanks, same here!
@aRustyPatina
5 жыл бұрын
Look at all the LAZY thumbs down folks,, This Rig is a thing of Beauty! Your attention to detail is Incredible! Loved the start up video. Trying to source one of the 4bts for my ‘58 Ranchero project. Sure I’ll have purist haters but I’ll be cruising and they’ll be humping the gas pumps! Great Job Sir! W.
@Tinker1837
5 жыл бұрын
Hey thanks! Purists have their place, sure, but it can be a boring place too. Sounds like a cool idea to me! 👍
@iceman45ification1
5 жыл бұрын
I appreciate videos like this. I watch far too many videos of guys talking about what they're going to do instead of seeing the actual work. You did a fine job with that 4BT dude!! 👌
@Tinker1837
5 жыл бұрын
I try and make the video about the work and not about myself, thanks!
@russkielol
5 жыл бұрын
Wow, what a great video with a great talent. Both editing and the job
@Tinker1837
5 жыл бұрын
Thanks! It was a fun one, can hardly wait to drive it again.
@dandable
4 жыл бұрын
Dude this video is awesomely hilarious and you're a master fabricator to boot.
@Tinker1837
4 жыл бұрын
Thanks man! I still have a lot to learn, but it's damn good fun.
@imrancapricorn78
4 жыл бұрын
I love this man. A man with skill of all kinds.Solute you dear
@Tinker1837
4 жыл бұрын
Glad you like! All self taught or learned from talented friends :)
@wilfridkolarik6110
3 жыл бұрын
Very good job of professional and the quality video, tank you very much for the good moment. Champion.
@Tinker1837
3 жыл бұрын
Glad you like!
@bernatouhaenel3676
5 жыл бұрын
VERY NICE JOB !
@Tinker1837
5 жыл бұрын
Thanks!
@ДимонТёзка
5 жыл бұрын
Класс! Есть возможности и хорошие заготовки под свап, круто!
@Tinker1837
5 жыл бұрын
Thanks!
@alexwild9705
5 жыл бұрын
Закажи, купи,.. и тоже имей.
@mfasco84
5 жыл бұрын
Very well done, you are an inspiration!
@Tinker1837
5 жыл бұрын
Thanks!
@PatrickBaptist
5 жыл бұрын
Man that is such a better engine than what came in those, but the Disco was the best factory 4x4 I've ever owned. I even rolled it on it's side and was still able to crawl out of the hole, no oil pressure most the way LOL.
@Tinker1837
5 жыл бұрын
I liked the way the old V8 sounded... but that's about where the likes ended. They might not look like much from outside, but you crawl underneath & things become apparent!
@PatrickBaptist
5 жыл бұрын
I had a 02 year D2, little ol 4.oh V8. It atleast didn't strand me till I blew the engine, thought the trans would go first but neah the engine had enough after I froze it solid with just water for coolant in the winter, thawed it out with hot water and went on down the road and the rad froze on it because it was so cold and I had no clue the rad hose came off, funny thing is that it snapped the cam. Blam headgasket had went out at around 70k miles or something like that, was leaking oil before 40k... It made it to close to 150k before it was over, but I was VERY hard on the poor thing, 4" lift and 38s. Not much on power but it sure never let me down off road, going places that my jeep couldn't get into (before I lifted and put tires on the rover, just stock). I'd love to have another but my 5th child is on the way and they aren't big enough for my needs..... I just don't have the money for a toy and that's how I view them in my situation. I brought my first child home in my rover, I wish I'd never let it go.... Ohh well. Electronics were an outright joke on top of it, when I bought it it was 2 years used with only 17k on the clock, blame thing went through gas like it was nothing, put cheap fuel in it and you get to hear it knock like crazy, back when gas was over $3 a gallon and it was getting about 5-8MPG depending on how my foot was feeling. If I didn't manually shift the auto it would slam into every gear and shudder hard over it, this went on for a good 50k miles, I overheated the trans a few times over a leak in the cooler that I was too lazy to fix LOL. How that slush box made it that far is beyond me, I'm notorious for friggin up an automatic unless it's an Allison. Anyways sorry for the long blabbery, I really have enjoyed watching, thanks for sharing!
@americaninfidel9001
3 жыл бұрын
Very talented and professional
@Tinker1837
3 жыл бұрын
Thanks!
@DJInclined
5 жыл бұрын
That lifted rat wagon tho. Haha yes. 😏👌👌👌
@Tinker1837
5 жыл бұрын
Everything I drive/ride is getting pretty weird these days, but they make for a damn good time just about every day!
@СерыйГ-ь8з
5 жыл бұрын
как всегда все акуратно и красиво жду новых видосов
@Tinker1837
5 жыл бұрын
Thanks!
@euricoaraujo7639
5 жыл бұрын
Parabéns pelo profissionalismo, organização e qualidade no serviço e finalização nota dez!
@Tinker1837
5 жыл бұрын
Thanks! Very fun project :D
@panikos8001
5 жыл бұрын
Gr8 work man... Just look after the rubber behind the exhaust it will be very hot around there. ...
@Tinker1837
5 жыл бұрын
Thanks & will do, probably going to pop that strip off for the start-up.
@brendancooney9401
5 жыл бұрын
Really nice job, but I think I'll stick with the TD5 in my D2. Rechipping it has done wonders!
@Tinker1837
5 жыл бұрын
I bet! I've seen quite a few here on youtube that sound healthy compared to stock. Just not easy to get hands on them here in the US :(
@npr1508
5 жыл бұрын
ชอบๆๆดูแล้วแอบยิ้มอยู่นิดๆๆ
@Tinker1837
5 жыл бұрын
Thanks, it's really fun!
@dudeparistx
5 жыл бұрын
MOST AWESOME INTRO EVER!!!!! LOVED THAT MOVIE.
@Tinker1837
5 жыл бұрын
Thanks & me too! I can dig it 😎
@dudeparistx
5 жыл бұрын
Awesome attn to detail. got a 72 cj5 i'm working on now.
@Tinker1837
5 жыл бұрын
@@dudeparistx Nice! I've been trying to convince my Dad to get his hands on one that I can help him restore. I haven't worked on many Jeeps & would like to!
@comfort_in_discomfort
5 жыл бұрын
Another AvE referenc! Love it.
@Tinker1837
5 жыл бұрын
Gotta keep it skookum!
@danielsmith9500
4 жыл бұрын
Looks amazing and I bet it’s a blast to drive
@Tinker1837
4 жыл бұрын
Hey thanks! And oh yes... it's so good!
@marcelodossantossalgado3352
5 жыл бұрын
PARABÉNS MEU AMIGO! MUITO CAPRICHOSO! CONTINUE ASSIM! QUANDO VIR AO BRASIL VAMOS TROCAR UMAS IDÉIAS! BOM FINAL DE SEMANA!
@Tinker1837
5 жыл бұрын
Thanks :) I would love to visit some day, it is a big beautiful country!
@marcelodossantossalgado3352
5 жыл бұрын
@@Tinker1837 WELCOME IN MY COUNTRY IN MY HOUSE! THANKYOU VERY MUCH
@henryrollins9177
5 жыл бұрын
Excellent..! Well done!
@Tinker1837
5 жыл бұрын
Thanks!
@oebemuitomassa
4 жыл бұрын
the scissor cut was awesome... 😆
@Tinker1837
4 жыл бұрын
Lots of power in those things haha!
@jeffreytrapp8533
5 жыл бұрын
i love your videos keep up the good work..
@Tinker1837
5 жыл бұрын
Thanks & will do!
@QuantumAlchemyst
5 жыл бұрын
Nice job man! El 👏🏻👏🏻👏🏻👏🏻👍🏻
@Tinker1837
5 жыл бұрын
Thanks!
@BobSmith-ui4qu
3 жыл бұрын
Just wow and green with envy.
@Tinker1837
3 жыл бұрын
Glad you like :)
@extra7219
5 жыл бұрын
i thought that was a reference to the Golden State Warriors hahahha!
@Tinker1837
5 жыл бұрын
Was an old reference for sure haha!
@robertjuric
5 жыл бұрын
Loved that movie!!
@Tinker1837
5 жыл бұрын
Hey thanks :)
@Freisein.
5 жыл бұрын
2:58 thats a great Tool, never saw it before. Just know it with the two wheels.
@Tinker1837
5 жыл бұрын
Sure is! The "JobberDo" is only $50-60 & does a surprisingly great job at forming, plus it supports a local guy's business building cool tools like this & a bunch of vintage racecars.
@Freisein.
5 жыл бұрын
@@Tinker1837 Thanks Dude, maybe he will sent it to Germany. Thanks for the Video💪🏼✌🏼
@02honeydew
5 жыл бұрын
That looks so good I'm pretty jelly
@Tinker1837
5 жыл бұрын
Hey thanks :)
@02honeydew
5 жыл бұрын
@@Tinker1837 No problem man. So i have a question: would having the internals balanced decrease engine noise in addition to harmonics or are the two things separate of each other whereby resucing harmonics is it's own thing and engine noise another? I'm interested in swapping a 5.9 12v into something and was mildy curious if it would work on a noisier engine especially the 4bt
@Tinker1837
5 жыл бұрын
Separate, & while I think a "blueprint & balance" could help a little with vibrations inherent in the 4-cylinder, but I don't think it'll help with the clatter associated with any mechanical diesel. That being said, the 6-cylinder is smooth as butter in comparison to the 4BT, as with most straight 6 engines.
@02honeydew
5 жыл бұрын
@@Tinker1837 Oh alright thanks for the reply. Yeah now that you say it, it makes sense that most of the noise from a 4BT would be because it's fully mechanical Idk why I couldn't handle thinking of that lol.
@Tinker1837
5 жыл бұрын
@@02honeydew It's all good! There are so few mechanical diesels around anymore, let alone 2-stroke & air-cooled diesels, so it's understandable :)
@MVA6195
5 жыл бұрын
Parabéns pelo excelente trabalho 👏👏👏👏👏👨🔧👨🔧👨🔧! Brasil
@Tinker1837
5 жыл бұрын
Thanks!
@truckcaretv8649
Жыл бұрын
Good work 👍👍👍👍
@burtbrooks7731
3 жыл бұрын
Crackin me up when he says something when it’s not n high speed 😂😂 sick build 👍👍
@Tinker1837
3 жыл бұрын
I have a knack for switching between squirrel voice & stupid comments haha!
@juttiemenang1174
4 жыл бұрын
Cummins so powerful engine, lasting running engine in harsh condition.Been used cummins engine 6cylinders on piling 9k hydro hammer DCP Uk.
@Tinker1837
4 жыл бұрын
Agree! It's so good :D
5 жыл бұрын
Show amigão!ta ficando top!
@Tinker1837
5 жыл бұрын
Very close now! :D
@seniorxj2931
5 жыл бұрын
Very impressive work Sir!
@Tinker1837
5 жыл бұрын
Thanks! It's been a really fun project & learning experience so far.
@ar-diagnost
5 жыл бұрын
Hello from Russia! Good job, good machine, you good man!
@Tinker1837
5 жыл бұрын
Hello & thanks! You must have great roads for cars like mine :)
@ar-diagnost
5 жыл бұрын
@@Tinker1837Your car doesn't need roads. :)
@Backyardmech1
4 жыл бұрын
Very nice build. I get the exhaust pipe was temporary, but I myself would’ve put header wrap on it after painting. Just to avoid any extra radiant heat melting melting things on the firewall.
@Tinker1837
4 жыл бұрын
A good idea too since there's a hood deal that will need to be right nearby to it 🤔
@nate5102
5 жыл бұрын
I like the 6061 style
@Tinker1837
5 жыл бұрын
Had to look up what you meant (assuming you didn't mean the grade of aluminum) & now I have another interesting channel to check out, thanks!
@antalyadugunleri5298
4 жыл бұрын
Harika bir işçilik yaptınız üstat 😮
@Tinker1837
4 жыл бұрын
Thanks!
@antoniomancini1794
4 жыл бұрын
I had to subscribe when it started out with the warriors.,Warriors come out and play..
@Tinker1837
4 жыл бұрын
I've been kinda surprised how many recognized that reference :)
@rexhepnikqi6148
5 жыл бұрын
YOU ARE DOING A GREAT WORK.
@Tinker1837
5 жыл бұрын
Thank you
@joseoscarorjuelamorales4289
3 жыл бұрын
. Que buen trabajo amigo perfecto Oscar Fusagasugá Colombia
@Tinker1837
3 жыл бұрын
Thanks :)
@gorillaz308
5 жыл бұрын
Great work! Love the video.
@Tinker1837
5 жыл бұрын
Thanks! Was a fun one to make.
@kayorenan406
5 жыл бұрын
Muito legal... ✌😁👍 Sabe o que seria legal, que o Sr deixa-se as anotações das medidas, referencia e calculos nas peças. Pra quando as pessoas vissem o seu reforço do seu trabalho, eles olharem !!! Nossa que legal , que bacana 😎. Canal top de mais.
@Tinker1837
5 жыл бұрын
Thanks! I'll keep the videos coming 👍
@orlinmelendez1914
2 жыл бұрын
Good Job sir, amazing CUMMINS forever
@dingledooley9283
5 жыл бұрын
Give the v bands a little happy tappy as you do them up, seats things properly.
@Tinker1837
5 жыл бұрын
Good to know!
@benjaminreinhardt259
3 жыл бұрын
Just stumbled across your channel. Had to subscribe just for the Warriors quote. Love that movie! The Disco build is cool too. LOL.
@Tinker1837
3 жыл бұрын
Ha! Glad you like, was not sure how many would even understand the reference (which is why I tossed in the image)
@MrFakit
5 жыл бұрын
I'm afraid that shirt is cultural appropriation you'll have to send it to me and oh upsize it to XL :P
@Tinker1837
5 жыл бұрын
Ha!
@chucktaylor4958
Жыл бұрын
Great tutorial.
@mcalvert1000
4 жыл бұрын
work is clean AF
@Tinker1837
4 жыл бұрын
Thanks! My paintwork could use some improving though. Always improving!
@utahbones3094
5 жыл бұрын
Love your videos! 👍
@Tinker1837
5 жыл бұрын
I'll keep 'em coming, hopefully the next one is a noisy one :D
@hyipoymi
3 жыл бұрын
Круто!!! Прямо вдохновил) благодарю!
@Tinker1837
3 жыл бұрын
Happy you like! :D
@teeg3275
5 жыл бұрын
Only if it went this fast and easy in real life
@Tinker1837
5 жыл бұрын
That's no joke! The magic of editing makes it all but fly by.
@joejonasjonas1919
4 жыл бұрын
super clean and nice work good job bro go ahead
@Tinker1837
4 жыл бұрын
Thanks :)
@007Gofer
5 жыл бұрын
Love it, great video and fabricating!!
@Tinker1837
5 жыл бұрын
Thanks!
@rommelong6617
4 жыл бұрын
Pepies ko
@FluffleValveExpress
5 жыл бұрын
Very nice. Well Done.
@Tinker1837
5 жыл бұрын
Thank you!
@ldt_
5 жыл бұрын
Scissors... you got jokes.
@Tinker1837
5 жыл бұрын
And here I thought a spontaneous thing that far in the video would go mostly unnoticed... guessed that one wrong!
@ldt_
5 жыл бұрын
@@Tinker1837 Nah, my part-time job is finding spontaneous "things" in video's and calling people out on it. My job is done here.
@Tinker1837
5 жыл бұрын
@@ldt_ Roger that ✂️
@Cheetahtos
5 жыл бұрын
Magic scissor, I need that.....
@srobby98
5 жыл бұрын
Awesome work! ..from Italy
@Tinker1837
5 жыл бұрын
Thanks!
@257dieselrepairperformance6
5 жыл бұрын
Dude love the pride you put into your work. What does your shirt say? Lol
@Tinker1837
5 жыл бұрын
Thanks! The text is basically Canadian for "good shit" & the tool is a Scandinavian nut fucker with automatic thumb detection. Kinda weird out of context... but it's from a guy on youtube called AvE.
@257dieselrepairperformance6
5 жыл бұрын
Haha I gotcha well keep it up can’t wait for more videos
@carlosmenard3926
5 жыл бұрын
Excellent job
@Tinker1837
5 жыл бұрын
Thank you
@TJackSurvival
4 жыл бұрын
Strangely hyper entertaining
@Tinker1837
4 жыл бұрын
Glad you like!
@clintstallone
5 жыл бұрын
Nice job mate
@Tinker1837
5 жыл бұрын
Thanks!
@DJInclined
5 жыл бұрын
Ahhh yes, just completed my elaborate custom turbo diesel engine conversion on my prized possession truck. Time to close the hood and.... Wait shit, the engine is outside of the hood? Crap.
@Tinker1837
5 жыл бұрын
Hoods are overrated ...not the first engine swap I've done that didn't fit under it's stock hood, ha! I've got a cool idea for the hood. Might be a bit of a pain in the ass since the hood's aluminum, but hell with it... more fabricobbling!
Пікірлер: 713