pat and mick ready for the pub, all dressed up in their best shirt and wellies.
@jupiteral8217
4 жыл бұрын
Here in south florida, when we make stucco cornerstones like that- we call them quoins- we lay on the whole corner at once, ground to soffit, 3/4 or 1" thickness of stucco or so, no wood forms, nothing. Then as the mud dries, we lay out the cuts with a tape measure to the desired dimensions and cut out the joints that form the blocks or quoins with a tool that is the width of the desired joints. All that wood forming is 3x as much work
@MrFlynnytwo
3 жыл бұрын
You call them Quoins because it is French for Corner! Immigrants from Europe brought the technique with them to The USA. You have to be a real artist to do them freehand. I would love to see your work.
@kaisahfx1246
4 жыл бұрын
these dudes ate the best dressed plasterers I've ever seen
@jimmybaldwin737
4 жыл бұрын
KAISAH fx 😂😂
@daneapeterson
6 жыл бұрын
For those who cannot operate a simple level and a simple home made cutting tool (to any shape you desire). Congrats on making a tool that solves a problem that didn't exist
@davetynan5045
5 жыл бұрын
Dead true
@bajadhomedesigns4886
Жыл бұрын
Sir india me kaha par mil sakte ha ye kit please ans...
@pcjplasterer5661
4 жыл бұрын
I'll continue to do it my way thanks
@davidtynan3018
6 жыл бұрын
great bit of kit
@azzamatdardhk8643
8 жыл бұрын
Thanks for your new tool for plastering masons. I am cement and sand based plastering contractor in kingdom of Saudi Arabia. Please can you tell me any tool for plastering on doors and windows edges because it is very time consuming in conventional methods. I am searching for a new for this purpose. but I also want to buy this tool , please can you tell me how to buy it.with best wishes, azmat hussain from suadi Arabia
@kevinnoscoe6284
7 жыл бұрын
azzamat dardhk dear sir they are called quoin cutter these quite a few on the market, amazon have a few or eBay look for Dutch pin video etc. Peace 👍🏼
@azzamatdardhk8643
7 жыл бұрын
Kevin Noscoe , thanks for help in .Please can you tell me , are you working in cement based plastering field. With best wishes and regards azmat hussain
@kevinnoscoe6284
7 жыл бұрын
azzamat dardhk yes my friend since 1992 😁
@azzamatdardhk8643
7 жыл бұрын
Kevin Noscoe , thanks my friend, you have spent a long time in plastering, now are you a contractor in plastering, I have make a lot my efforts to become a plastering contractor here in Saudi Arabia
@kevinnoscoe6284
7 жыл бұрын
azzamat dardhk yes for a long time now if you go to my face book I can let you know a few guy you could watch and talk to. 1 in Ireland and 1 in the USA. But good luck 😉
@deribrown
7 жыл бұрын
Where can I buy one of these? I live in Wales.
@simoncrewe5625
2 жыл бұрын
Where can I get?
@concreteandplasterjobs812
6 жыл бұрын
Cool 😎
@sajidulislam5325
7 жыл бұрын
Is it available in Bangladesh?
@greyhairedphantom4038
7 жыл бұрын
RAG - ( rough As Guts!)
@davetynan5045
5 жыл бұрын
Have you ever done any plastering it's for people who can't come on site I will show how to do it without your plastermate
@simoncrewe5625
4 жыл бұрын
Where can I purchase this
@davetynan5045
5 жыл бұрын
I'm only speaking the truth if you can't do this without plastermate you shouldn't be in this game I thought you was allowed an opnion
@garydouglass9577
6 жыл бұрын
RAF.=rough as fuck!
@joefrugoli4970
5 жыл бұрын
I guess these guys never saw what cement mortar does to aluminum. It isn't pretty.
@MrFlynnytwo
4 жыл бұрын
What do You mean? I used to use aluminium darby's and feather straight edges for years with no deterioration, apart from wearing out after many years use
@cyderryder
3 жыл бұрын
@@MrFlynnytwo Not to mention aluminium hawks ;)
@davetynan5045
5 жыл бұрын
Any plasterer worth there salt don't need this tool waste of money what's the world coming to
@padraigcreighton1336
5 жыл бұрын
Thank you for wasting your time if i needed your opinion I would have asked for it.
@Kerritwyford
5 жыл бұрын
Ye headcase it's a perfect tool for quoins. Iv used the exact tool before and it saves u time
Пікірлер: 37