My friend I want to tell you something. Thank you for all your videos. I have learned so much from you. I’ve gained a lot of knowledge from you and it’s saved my behind many times. Just rebuilt my 12.7 and you walked me thru most of it. Thank you sir. Greatly appreciated
@anibalbabilonia1867
4 жыл бұрын
Another great video! Excelent job Gordon! You've done something not many people, young for that matter dare to pull off! Hats off to you Sir!😎👍
@57bagre
4 жыл бұрын
Thanks Anibal.
@billybobs841
9 ай бұрын
Liked and subscribed thank you agin you done a really good job on maken this video
@chuckychuck
4 жыл бұрын
Put the fan on I don't care about the noise, your health come first, heat stroke is nothing to play with especially when you're alone. I was caught of guard a few time when I was working on my car.
@Progressivehvacr
4 жыл бұрын
I agree 100% Mr Gordon , please be careful in the heat.
@billybobs841
9 ай бұрын
Hey bud I sure do appreciate you maken this video I got 1 I need to fix
@57bagre
9 ай бұрын
Thank you sir.
@ISXCUMMINS565
4 жыл бұрын
Never mind I watch the last video and saw put them in.. thanx your the man👍
@57bagre
4 жыл бұрын
Thank you sir.
@djperezhitparade
3 жыл бұрын
Mr. Robertson we appreciate this kind of videos and the fact that you are kind enough to share your knowledge and experience, thank you. Now, I have a question: what was the cause of that failure in the “Spider Nest” or whatever is the real name of that part?
@johnysilver1853
Жыл бұрын
My truck has problem when I turn differential switch on I hear air does something but only one rear wheel spinning on passenger side. What can be the problem? What's need be checked or replaced?
@ISXCUMMINS565
4 жыл бұрын
Did you put all 3 shims back in, the have moon ones?
@sunwaterflowz
3 жыл бұрын
Good Work Sir
@prevost8686
4 жыл бұрын
Gordon, how many total miles does your truck have on it? I can relate to you having to wrestle with stuff by yourself. My son was my helper but he’s in the USMC now and far away from home. Don’t help to to be getting old either.
@57bagre
4 жыл бұрын
1.5 m. miles. Good you had a son who would help. The new generation will never lay a finger on anything like that, and even if they would, they can't hear you with the ear buds on and can't see with the "gadget" glued to their eyes.
@prevost8686
4 жыл бұрын
Gordon Robertson DIY That’s true. Makes you wonder about the future of America.
@57bagre
4 жыл бұрын
@@prevost8686 America? it's everywhere now, just like McDonald's and childhood obesity. Don't let me get started!
@meradu2
4 жыл бұрын
Gordon Robertson DIY lol you are so Corect sir about the new generation 🤔
@k.lamareyev4418
2 жыл бұрын
What tye of divider is that? Eaton ds404?
@maximumpowertrain1433
2 жыл бұрын
Good job sir i have the same job as well, thank you for sharing your knowledge 👍🏼
@57bagre
2 жыл бұрын
Thank you for watching sir. I'll be taking a look at your channel as well.
@maximumpowertrain1433
2 жыл бұрын
@@57bagre thank you so much sir 🙏🏼 im your new subscriber.
@williamzoom
4 жыл бұрын
Nice job!
@57bagre
4 жыл бұрын
Thanks Will.
@excavatoree
4 жыл бұрын
my first thought was "that looks like a differential turned sideways, then I realized that's exactly what it is. instead of two perpendicular shafts to each wheel, it divides the power to the pinion of the front diff, or the shaft to the second. I take it your truck does not have a "locking" divider. Is that the equivalent of an "open differential?" I didn't see any clutches or anything like that to indicate it was some form of limited slip.
@57bagre
4 жыл бұрын
I don't know much about what goes on in there, I don't think there's any limited slip but both diffs are always in play just not all 4 positions at the same time.
@tajcolvin785
4 жыл бұрын
Gordon, I rewinded your video I think I saw the thrust washer facing down.
@57bagre
4 жыл бұрын
Thanks, but I'm not going to take it back apart to flip the washer.
@sunwaterflowz
4 жыл бұрын
Great job man
@57bagre
4 жыл бұрын
Thanks AJ
@franklindeza1624
3 жыл бұрын
Me gusta el trabajo
@57bagre
3 жыл бұрын
Thanks for watching.
@markarmstrong3394
4 жыл бұрын
Gordon never seen anyone only pull that part of one out or anyone rebuild one. Everyone is to lazy and always pulled it all out and had them rebuilt. But they usually have the teeth broke and lots of metal. Pulling the whole thing is a pain in butt.
@57bagre
4 жыл бұрын
Give the credit to Vince, I didn't know which way to turn. Thanks Mark.
@markarmstrong3394
4 жыл бұрын
@@57bagre what I love about watching you is you saved and bought your own tools. So many folks bumb tools. Most cant do anything without borrowing everything. But they have plenty of money for beer
@nfarnell1
4 жыл бұрын
Only repairing the power divider is a bit of a gamble, the crown and pinion are right under the divider and the pinion turns counter clockwise, SO anything that comes off the divider drops directly down between the pinion and crown gears. Gordon's divider did not seem to be missing a lot of pieces so he may be OK. The divider is very heavy and is quite a handful to install, measuring the end play and installing the right shims horizontally is also challenging. Doing this job vertical in a swing jig is much better and you also get to verify the other parts are serviceable and set right. Piece of mind is often under rated.
@nukenridge4921
4 жыл бұрын
Shop fan and you should be okay ,check out G2S fan section
@A-37Bdragonfly
3 жыл бұрын
Bad maintenance...never changed differential oil ....has to be changed once every 300,000 or every 3 years
@captainkirk3697
4 жыл бұрын
Gordon can you please share the driveline shop contact details. I'm in central mo a couple hours west of you and I'm getting some shaking on my 99 Classic. The dust cover came loose on the yoke pinion seal going into the divider and I'm trying to figure out the shaking. I may need to rebuild that divider like you did.
@57bagre
4 жыл бұрын
I'm not comfortable doing that because he might start getting calls from people to pic his brain who have no intention of doing business with him. I'm sure there'r plenty of dealers and driveline shops in Columbia, JC and so forth. As for the dust cover, you can weld it on or take it off maybe you can get a new one and press it on. If you're serious about doing business with Vince I could arrange it when you're in the area.
@captainkirk3697
4 жыл бұрын
I priced the yoke, $200.00 at Columbia Freightliner.....the seal is 65 bucks....25 on eBay...... But like I said I'm getting some shaking between 25 and 30 mph.... The beveled dust good worked loose from. The yoke and was flipping, so I cut it off. But something else might have caused it to work loose. I guess the first step would be to check the tightness of the pinion bolt. I can't get any play out of the u joints or carrier bearing.
@captainkirk3697
4 жыл бұрын
"beveled dust hood worked loose"....spell check fail...."it was flopping around, so I cut it off with snips"
@57bagre
4 жыл бұрын
You can live without it. I'm not thinking the driveshaft would shake at 25 - 30 only, it would continue to get worse the faster you go, so would a tire. Are you sure it's not an injector or something?
Пікірлер: 44