Thanks for the video. Mime was jammed and I took it apart. Would have never got it back together without this video.
@DrBDIY
11 ай бұрын
Great to hear!
@jackplunderbones
Ай бұрын
Thank you SO much for posting this video! My Craftsman 68514 broke and I was able to repair it using this video! 🤘😁🤘
@DrBDIY
28 күн бұрын
Glad I could help!
@zachcantrell3664
5 ай бұрын
This video was a lifesaver. Mine jammed up. Figured I’d take it apart and try to fix it before buying a new one….nothing to lose. Got it apart but couldn’t even begin to get it back together. Searched for a video as a last effort and lo and behold, here we are. $25 saved!
@DrBDIY
5 ай бұрын
Glad it helped. They are great staplers.
@JohnMarks-kj3zp
2 ай бұрын
thank you for sharing the video. it was jamming 2 /3 staples at a time and now it working as brand new.
@DrBDIY
2 ай бұрын
Glad it helped
@user-fk5pi8pf7p
7 ай бұрын
Thank you. When i took mine apart the pieces went everywhere; this video helped immensely.
@DrBDIY
7 ай бұрын
Excellent!
@TonySabaTS
17 күн бұрын
Legend. I opened it up and it all fell apart. Ah hell! Couldn’t figure out what you were doing with the spring. Your fingers were in the way but I saw how you did it at around 4:30. Thanks. I think that spring had jarred loose because there was no pressure on the trigger part before I took it apart.
@DrBDIY
16 күн бұрын
Glad it helped!
@patbird9694
5 ай бұрын
Too bad for me you didn’t make this video eight years ago. Had to figure it out myself. I wanted a video to check if I did it correctly. Thanks for posting.
@DrBDIY
5 ай бұрын
Glad I could help!
@sissymurphy9620
11 ай бұрын
thank you so much . I fixed my stapler so I could finish putting up the insulation in my new shed that I got for my 50th wedding anniversary from my hubby and sons THANK YOU THANK YOU . I ALSO SAW VIDEO on youtube that shows how to get a jammed staple out of the power shot by only taking out that back screw and pulling out the bottom staple feeder to release the staple that jammed . That is what caused my problem to start
@DrBDIY
11 ай бұрын
So glad you fixed the stapler!
@jackieofalltrades5328
8 ай бұрын
Thanks! I’m gonna take mine apart today. It’s never worked right since I bought it. The staples never go in all the way. Grrr! Real disappointing since mine was made in USA. I’m trying to reupholster my sons chair, so I need this to work properly.
@DrBDIY
8 ай бұрын
Cool. Take pictures as you disassemble !
@rpcool
Жыл бұрын
This was super helpful. Thank you!
@DrBDIY
Жыл бұрын
DIY ! thanks
@nal909
Жыл бұрын
So helpful, thank you!
@TheBeardyDave
Жыл бұрын
Very helpful, thank you
@DrBDIY
Жыл бұрын
You are welcome.
@mikekennedy2097
Жыл бұрын
Thanks for making this video.
@DrBDIY
Жыл бұрын
Easy fix. Enjoy.
@TienPham-qs1bm
4 ай бұрын
Thanks
@DrBDIY
4 ай бұрын
Welcome
@wmwinkle
4 ай бұрын
Could not find a diagram. Found this video very good minimum bs. Thanks
@DrBDIY
4 ай бұрын
Glad to hear it
@tathuen
Жыл бұрын
Thank you and amazing.
@DrBDIY
Жыл бұрын
Glad you enjoyed it!
@BigFarm_ah365
8 ай бұрын
I thought I had it all togerther perfect, but then I remembered why I took it apart in the first place a year or more ago, the hammer isn't pulling back
@DrBDIY
8 ай бұрын
Try again. All parts have to be laid in there precisely.
@BigFarm_ah365
8 ай бұрын
@@DrBDIY I don't know bud, the arm in the center is missing the piece sticking out of the hammer by a mile. Doesn't even touch it, swings right by in the inside lane like it owes it money and I ain't seeing what's going to change that. You Tube is telling me to shut off my ad blocker and I finally did, and it's still telling me to turn it off
@migyverman
7 ай бұрын
If the slant in the center groove of the white plastic piece is worn out, it won't move the arm that runs between the leaf spring under the striker to lift it.
@rondab16
Жыл бұрын
The main spring wasn’t that easy to set! I could not do it! Not strong enough. Is there a trick to setting the spring? You make it look too easy!
@DrBDIY
Жыл бұрын
Which spring? What minutes:seconds in the video are you referring?
@rondab16
Жыл бұрын
@@DrBDIY 3:16 the big metal rod that fits over the plastic piece and has two prongs at one end and the opposite end has to be bent back for tension. It’s like bending strong metal. It feels impossible. So some tips for that would be the real secret key to this problem for me! Thank you!
@DrBDIY
Жыл бұрын
Push down on the metal rod with your fingers and pry with your thumbs. It make take a few attempts. Otherwise, borrow some bigger hands from a friend? I hope it works for you.
@migyverman
7 ай бұрын
You can also use a small adjustable wrench on the rear outer edge of the leaf spring lengthwise for extra leverage while pushing down slightly on it so that it doesn't come out. Then push the edge firmly into place once it is lined up.
Пікірлер: 40