You have done nice job thanks for sharing the informative video ❤
@revathip0505
3 ай бұрын
Very neet and clear explanation for all type of students ❤
@kunika3282
2 жыл бұрын
Incredulous explanation 🙌🙌
@MicroChemsExperiments
2 жыл бұрын
Glad you think so!
@sonunegi4356
3 жыл бұрын
I am. Not understand at the time of titration u have taken 20ml NaOh intiial but at final how it is goes 30.2ml ?? On titration it would reduce reading because drops going out in flask??? Please answer
@MicroChemsExperiments
3 жыл бұрын
The titration reading, at the initial stage, was 20ml. After completion of the titration, the reading was 30.2. Burette scalling was that type that is increased the reading with time. So you need to subtract to find the actual volume which was 10.2 found in this video.
@louisapladio6206
2 жыл бұрын
SHARING THE VIDEO, THANKS
@MicroChemsExperiments
2 жыл бұрын
You are welcome
@savibatth5110
Жыл бұрын
Sir what ml of HCL we should take for 1N NAOH, and how many drops of phnolpthaleine indicator
@abdhjr4780
3 жыл бұрын
Hello is it the same procedure for preparation and standardization of 0.1N KOH?
@MicroChemsExperiments
3 жыл бұрын
Yes. Procedure is similar, except weight of KOH pellet.
@abdhjr4780
3 жыл бұрын
@@MicroChemsExperiments what is the weight of KOH pellet in this procedure?
@MicroChemsExperiments
3 жыл бұрын
@@abdhjr4780 2.805g KOH for 500ml solution of 0.1N
@xerophyte2004
10 ай бұрын
@@MicroChemsExperimentshow did you calculate the weight?
@gracefulheart7910
3 жыл бұрын
Great video Thanks
@MicroChemsExperiments
3 жыл бұрын
Thank to you too. Stay with us.
@prasannaudayakumara2319
3 жыл бұрын
Pottasium hydrogen pethlete using NaOH normality chek wrong or correct
@MicroChemsExperiments
3 жыл бұрын
You can standardize NaOH solution using potassium hydrogen phthalate and you can also use standard HCl solution
@mehulprajapati7105
8 ай бұрын
Is there possible to final reading is hier then initial reading???? Because if supposed we start a titration from 20 ml and add NaoH in the flask of Hcl then how can the reading is then the initial reading Reading is below to the 20 ml for final reading... Plz explain it
@ridamalik4561
9 күн бұрын
Initial reading of byrette before starting titaration was 20, after pink color it was 30.3 voulume of NaOH consumed us fi d ny subtracting initial reading from final , 30.2 -29 =10.2
@SohelRana-ln7bg
10 ай бұрын
Pls share how to calculate the purity of reagent. That's means Assay of NaOH is 98% Purity = 40* 100/98 is ot correct?
@kaushaldewangan6500
2 жыл бұрын
Sir... 0.098 Normality ke NaoH solution ko 0.1 Normality karna hai to kitna gram NaoH dalna padega ... calculation karke bataye.....ya kisi aur ko pata ho to bataiye .. please
@MicroChemsExperiments
2 жыл бұрын
I think it is difficult to calculate.
@elumalaihap4322
2 жыл бұрын
I'm full understanding & thank you so much
@MicroChemsExperiments
2 жыл бұрын
Thank you
@lucy9671
2 жыл бұрын
This was so useful tyy
@MicroChemsExperiments
2 жыл бұрын
Thanks
@rania5349
2 жыл бұрын
Well explained, thank you so much. I'm wondering about the reference if you can give it to me
@MicroChemsExperiments
2 жыл бұрын
No exact reference for this video. This is derived from the acid base neutralisation chemical reaction.
@ankitchauhan1505
2 жыл бұрын
Mam oxalic acid ka preparation batayiye
@MicroChemsExperiments
2 жыл бұрын
Noted.
@SohelRana-ln7bg
3 жыл бұрын
You mentioned HCl but how prepared 0.1 N HCL?
@MicroChemsExperiments
3 жыл бұрын
kzitem.info/news/bejne/zY6wp3ZusKFyl20 Please check all of our videos.
@anweshade39
2 жыл бұрын
Can we use this in place of 0.1N NaOH solution??
@MicroChemsExperiments
2 жыл бұрын
Yes. You can.
@serhafiye7046
3 жыл бұрын
Thanks
@MicroChemsExperiments
3 жыл бұрын
Welcome
@serhafiye7046
3 жыл бұрын
@@MicroChemsExperiments Your video just used in a distant education class, somewhere in Turkey :)
@MicroChemsExperiments
3 жыл бұрын
@@serhafiye7046 Awww, really? It's a great pleasure for me. Thanks for supporting me and conveying this news. I'm soo happy.
@manojchouhan8869
3 жыл бұрын
Pls make video ( KOH solubility).
@MicroChemsExperiments
3 жыл бұрын
Noted. We will work on it soon. Stay with us.
@ArchanaPawar-c9i
9 ай бұрын
How to check 0.02 h2so4 N preparation and standardization
@suridawar8656
2 жыл бұрын
Great
@MicroChemsExperiments
2 жыл бұрын
Thanks
@shriyanshdixit261
2 жыл бұрын
Please explain about initial buret reading that is 20, How it is 20
@MicroChemsExperiments
2 жыл бұрын
Look at 3.44 time of this video. You could see the solution in the burette touches the label of 20. That's why the initial burette reading is 20.
@bibabenouamane334
Жыл бұрын
Please can you explain to me why you use 2g of phenol on 100 ethanol i found just 1g
@MicroChemsExperiments
Жыл бұрын
It is just a indicator dye. Concentration can vary
@msanthosh4980
2 жыл бұрын
Is this standardization procedure applicable for all chemicals..?
@MicroChemsExperiments
2 жыл бұрын
No. Only for NaOH
@sathyapriya1786
3 жыл бұрын
Please make the video of sulphur test for hexane (White petrol)
@MicroChemsExperiments
3 жыл бұрын
Noted. We will make. Stay with us.
@IsraaHussein-r1o
11 ай бұрын
purpose of experment?
@jackdawson7385
2 жыл бұрын
How to take the initial reading...please help me
@muhammadtalha5284
10 ай бұрын
Thank you 😊
@kausarjahan2781
3 жыл бұрын
Superb
@MicroChemsExperiments
3 жыл бұрын
Thank you
@padmaboddupalli6369
2 жыл бұрын
Explain the initial value 20,NaoH is titrate through which chemical for standardization
@MicroChemsExperiments
2 жыл бұрын
Initial value was 20 because the burette reading was 20.0 when the titration just started. Take a look at the video - 3.42 min
@btspyrexia3648
Жыл бұрын
Final burate reading 30 kaise ho gya
@MicroChemsExperiments
Жыл бұрын
Look at the burette scale marking. After ending the titration, the solution in the burette is level with 30.2 marks of the burette scale
@ghufranyaseen9646
14 күн бұрын
Unknown concentration hmesha neche as a tirand li jati ha
@pi2745
Жыл бұрын
Hcl is also a secondary std solution. How did you standardise naoh with hcl?🤨
@benedictagifty6097
Жыл бұрын
I don’t also get it but I think she means performing titration with HCl ( known concentration) to ascertain or confirm the concentration of NaOH Prepared.
@user-nr6hc3es5r
5 ай бұрын
Reference of the method please ❤
@hudasultan9972
3 жыл бұрын
Hello, possible calculations, results and discussion for this experiment because I need it very much. I want it to write the report
@MicroChemsExperiments
3 жыл бұрын
Sorry we dont provide these types of stuff. Plzz do it by yourself. Thank you.
@kylamariztablizo700
2 жыл бұрын
what is the type of titration? pls answer asap thanks
@MicroChemsExperiments
2 жыл бұрын
Acid Base titration
@mailtonousad
2 жыл бұрын
great
@MicroChemsExperiments
2 жыл бұрын
Thanks
@rkvihari7773
2 жыл бұрын
Please make video on 0.1N Hclo4 strength
@MicroChemsExperiments
2 жыл бұрын
Noted
@luqmanmashwani6067
2 жыл бұрын
Amazing
@MicroChemsExperiments
2 жыл бұрын
Thank you! Cheers!
@ananditapradhan4809
10 ай бұрын
Pls send the chemical equation
@muhammadzohan8904
2 жыл бұрын
Good
@MicroChemsExperiments
2 жыл бұрын
Thanks
@myselfRavi2002
6 ай бұрын
Thanks💙
@MicroChemsExperiments
6 ай бұрын
Welcome
@jolll2469
2 жыл бұрын
Hello maam can you do 0.01 N of NaOH thank you
@MicroChemsExperiments
2 жыл бұрын
Just dilute the NaOH solution 10 times more.
@lokeshhr8596
3 жыл бұрын
Why hcl is added.. Mam..
@MicroChemsExperiments
3 жыл бұрын
To neutralize the NaOH with acid
@lokeshhr8596
3 жыл бұрын
@@MicroChemsExperiments mam naoh is secondary std it shld b titrated against primary std why v did with hcl not like potassium hydrogen phthalate
@MicroChemsExperiments
3 жыл бұрын
@@lokeshhr8596 There will be no error for standardization of NaOH with HCl. We have been doing this standardization by this acid base reaction and found no problem with it.
@ayajangi7798
3 жыл бұрын
Pls make a video using potassium hydrogen phthlate..and also the calculation
@fouziimii7884
2 жыл бұрын
thank you so much
@MicroChemsExperiments
2 жыл бұрын
You're welcome!
@SohelRana-ln7bg
2 жыл бұрын
How to calculate the factor of normality?
@MicroChemsExperiments
2 жыл бұрын
We will make video for it later.
@biswonathsahoo9821
2 жыл бұрын
Thanks ☺️
@MicroChemsExperiments
2 жыл бұрын
You're welcome!
@nipunpriydarshana5412
3 жыл бұрын
Thank s ❤
@MicroChemsExperiments
3 жыл бұрын
You are welcome. Stay with us.
@geethamedi8687
Жыл бұрын
Tqq mam
@MicroChemsExperiments
Жыл бұрын
You are most welcome
@Harum_ki_Amma
7 ай бұрын
Why 2g NaOH in 500 ml.
@RaulZayn
2 ай бұрын
To make 0.1N NaOH
@JatinderSingh-vr3jt
3 жыл бұрын
Standardise NaOH against oxalic acid which is a primary standard
@MicroChemsExperiments
3 жыл бұрын
You are right.
@JatinderSingh-vr3jt
3 жыл бұрын
@@MicroChemsExperiments your videos are wonderful
@MicroChemsExperiments
3 жыл бұрын
@@JatinderSingh-vr3jt Thank you so much for your comment. Stay with us.
@sakirhossain2016
3 жыл бұрын
How about alkali standardization with potassium hydrogen pethelet?
@rolandleka5342
2 жыл бұрын
Volumetric pipette of 10 ml should be used ad it is more accurate. Hcl is somewhat volatile and tends to loose concentration even slightly. And finally, before performing standardization you must treat the NaOH with few drops of barium chloride in order to remove carbonates which are always present. Solution must then be filtered and standardized
@abedhajjar5813
2 жыл бұрын
Your normality is 0.098 how can assure that it is 0.1N??
@MicroChemsExperiments
2 жыл бұрын
Use this solution as 0.098N. Not 0.1N
@kevalmajvelkar1134
2 жыл бұрын
Initial reading = 20 ml ???????
@MicroChemsExperiments
2 жыл бұрын
Yes
@zeelpatel4218
2 жыл бұрын
How to 0.1N HCl standard solution
@MicroChemsExperiments
2 жыл бұрын
kzitem.info/news/bejne/zY6wp3ZusKFyl20
@ArifHossain-hf1iq
Жыл бұрын
10 N how to prepared
@MicroChemsExperiments
Жыл бұрын
Add 10 times more NaOH pellet
@saliksiddiquee3254
3 жыл бұрын
Plz 0.1 N kmno4 video plzzz
@MicroChemsExperiments
3 жыл бұрын
Noted. We will make. Stay with us.
@OrcjaEnglish
7 ай бұрын
Ruined the whole video by adding the background music.
@MicroChemsExperiments
7 ай бұрын
We will lower the music next time. Use Headphone please
Пікірлер: 129