Whenever I have a good idea about a part that would be awesome I always check with JP and usually you’ve already thought of it.
@APBT-Bandog
Жыл бұрын
I wish you made the A2 front sight in an adjustable gas block that was NOT clamp on...but was set screw with the option to use pins/taper pin set up.
@philpeterson7182
4 жыл бұрын
Like Jeff Lebowski's rug which tied the whole room together, an AR15's gas block ties everything together 0:30
@monocogenit1
2 жыл бұрын
el duderino??
@philpeterson7182
2 жыл бұрын
@@monocogenit1 If you're not into the whole brevity thing
@johnzarollin2749
3 жыл бұрын
Adjusting the JPGS-9D on a LR 308, 20" barrel , 0.096" gas vent. Correct ejection angle of 3 o clock @ 18 clicks out. 25 is max.. Beyond that there was no difference in felt recoil or function. Hard recoil and bolt strike on upper has been a problem. I was expecting some felt recoil reduction but didn't perceive any. Scope is worth effort to reduce as much recoil as possible.. Would like to hear others experiences with this gas block. Great product, great company.
@stillenacht8518
Жыл бұрын
Sounds like you need a heavier buffer in the back end as well. You are running that block almost wide open, I assume you are shooting unsuppressed
@StuninRub
8 ай бұрын
@@stillenacht8518lighter buffer, not heavier.
@illestdomer2005
6 ай бұрын
It’s 308; so, it’s going to be spicy regardless. Use the least amount of gas necessary to cycle reliably. Play with the buffer weight and spring strength as secondary and tertiary adjustments.
@StuninRub
6 ай бұрын
@@illestdomer2005 308 is not spicy at all. You can get it to be extremely soft shooting.
@ElijahNMitchell
2 жыл бұрын
Damn, I’m thinking of building a Gordon inspired build and that A2 sounds perfect for tuning the suppressor that will live on it
@gannonbrown6637
Жыл бұрын
Thats what im doing right now
@albanfisher6857
4 ай бұрын
wow i watched this just to see the adjustable fsb and you didnt even explain how it works. how many adjustment settings does it have?
@StefanSu91
4 жыл бұрын
I just bought an 11.5" BCM Enhanced Lightweight Fluted barrel. Is there a specific gas block that I need for it? I hear numbers like .675 or .70... what does this mean? Also, aside from price difference, is there any real downside to going adjustable vs basic? It seems like a no-brainer but I feel like I'm missing something. Also want to run it suppressed at some point. Any reliability issues? Should I focus on the buffer instead and will it give me equal results? First AR build. Thanks, I subscribed!
@JPRifles
4 жыл бұрын
We love adjustable gas blocks and think that they are the must have upgrade for any AR platform. However, you could get away with a non adjustable gas block if you would like. The .675 numbers, are the contour diameter of the barrel were the gas block goes. Once you have that number you will look for a gas block that has the same measurement.
@Sp00kyV0id
2 жыл бұрын
That a2 one is now on my Colt LE6920
@mr.christopherp.4851
4 жыл бұрын
Y'all guys are going to make me spend more money lol I just got a db15 and it is a lil overgassed with the ammo I like to run with and have been looking at just this lately looking for a clamp on style just like what you showed.. thanks and like the vids a lil more technical explanation would be nice though
@JPRifles
4 жыл бұрын
We are working on videos to show you all more hands on and technical explanation. We wanted to start at the basics for beginners and work our way up to those who would like more detailed specs and understand it.
@zekethefishgeek8690
4 жыл бұрын
I just shoot a single rounds with my rifle... with each round loaded 1 @ time in my magazine. Adjust it after you shoot each time... Until you have just enough gas to cycle it fully & where it will reliably leave the bolt locked back & open after each round you single load in your magazine before test firing the weapon.
@Edc-Guy
Жыл бұрын
Will the one piece fit over a pin and welded warcomp ?
@CatholicRenaissanceMan
2 жыл бұрын
So I’m very interested in installing the A frame FSP block (JPGS-2FS) on a rifle that currently has a standard A frame. Will the existing cuts in the barrel that accommodate the pins effect the install of this new FSP? What do I need to know before I install?
@JPRifles
2 жыл бұрын
Since the JPGS-2FS does not utilize those pin holes, they should not cause any issue with installation.
@finleyfirearms4626
Жыл бұрын
Will the FSP model fit the RIS II or RIS III FSP models by daniel defense?
@StephenStine
Жыл бұрын
do you guys make adjustable gas blocks for AR gas piston kits?
@Kaydje
3 жыл бұрын
If I can get out of shit ass Canada so I can go back to AR tuning for competition, I definitely wanna grab an adjustable block, and throw it on a long carbon fiber barrel if possible to keep in line with my lightweight, light recoiling marksman rifle idea.
@livingintheLight.
3 жыл бұрын
Hoes it going up there under the queen?
@BarattaFamily
4 жыл бұрын
Outstanding
@JPRifles
4 жыл бұрын
Thanks
@derek3154
3 жыл бұрын
What barrel profile fits that FSB?
@JPRifles
3 жыл бұрын
It's a .750. www.jprifles.com/buy.php?item=JPGS-2FS
@derek3154
3 жыл бұрын
@@JPRifles yes, I know that…lol. I mean will it work on any barrel or does it have to be a Government or M4 profile? Thank you
@TheUnholyLordClownz
3 жыл бұрын
@@derek3154 if your barrel has a journal size of .750, it will work. Barrel profile has no bearing on gas block size fitment.
@irvin325
4 жыл бұрын
I have a question. I have a Hbar 16" carbine gas barrel. It seems a bit over gassed, ejecting 556 cases at 1:00 to 2:00, so I added a H buffer, still pretty much the same. Then moved up to H3, cases landing at 3:00. I would like the case to eject at 4:00, I was planning on going with adjustable gas block. Since I have the H3 buffer in the rifle, should I keep it with the Adjustable gas block or go to a carbine buffer? What are the pros and cons of leaving the heavier buffer on the rifle with an adjustable gas block? Thanks for the video and the info.
@zekethefishgeek8690
4 жыл бұрын
me too... I think I have a way to adjust at either end & my thoughts are... so, H3 buffer weight equals -more overall rifle weight - more felt recoil
@derek3154
3 жыл бұрын
Try the Geissele spring/buffer or stick with an H2 and a adjustable gas block. I’ve also put a folding stock and when doing so there is a spacer weight that fits in your BCG…just adding that will slow/smooth out that recoil.
@joshhansen6045
4 жыл бұрын
So, i bought a JPGS-8, thinking that it only required clamping (i don’t have a precise way to dimple the barrel, nor do i want to drill on it), but i see in the instructions that it apparently requires the set screws! What is the recommended method to accomplish it? It’s annoying, to say the least!
@zekethefishgeek8690
4 жыл бұрын
jackhammer... with just one thump...
@unleasheth
3 жыл бұрын
When men refer to gun parts as "this guy " it makes me question if you're playing with action figures or something, do u also fondle the gas blocks when no one is looking 🤔
@nomad155
3 жыл бұрын
You don't?!
@unleasheth
3 жыл бұрын
@@nomad155 I just call the part what it is 🤷♂️
@monocogenit1
2 жыл бұрын
Why are all the JP gas blocks the clamp style? Vs the set screw style gas block.
@JPRifles
2 жыл бұрын
We feel the clamp style gas blocks provide a more secure gas seal.
@monocogenit1
2 жыл бұрын
@@JPRifles cool. Thanks for the reply.
@wolfbear572
11 ай бұрын
@@JPRiflesare clamp on style reliable for hard use I.e. long shooting sessions, rapid fire, defensive use?
@79dogface
3 жыл бұрын
Cool stuff but some of these products have been sold out for months
@ironsights7028
4 жыл бұрын
and still no .625 gas blocks. smh
@JPRifles
4 жыл бұрын
I'm sure if we offered a barrel with a .625 contour we would offer a gas block that size
@abolishtheatfandrepealthen6014
3 жыл бұрын
I used to run adjustable gas blocks but unless its for suppression a quality traditional block is a better option imo. Use the buffer and spring to tune it rather than masking issues with the adjustable block
@johnviera3884
4 жыл бұрын
You cut the muzzle device off, not the gas block
@johnviera3884
9 ай бұрын
@@Chef-James I stand corrected
@JenkinsStevenD
2 жыл бұрын
I love companies that post videos like this but don't post videos of their installation......NOT. Looking at JPGS-2FS but since you guys don't have a video of the install, I am not buying it. Not a big fan of your gas block alignment technique. Recommendation.....move the rear clamp forward a bit and add some material on the underside for a set screw to line up. Still clamps....you can pin it....clamp it....and set screw it. But you guys do you....I guess.
@NortheastSurvival911
9 ай бұрын
Yet here you are on their channel they didn't go to your channel did they? Nope. They didn't.
@JenkinsStevenD
9 ай бұрын
@@NortheastSurvival911 That wasn't a rebuttal to anything I said, nor was it constructive. Congrats on saying "you here not there" caveman commentary! You guys crack me up!😂😂😂 Fkn stupid...
@bench175
2 жыл бұрын
please talk more and show less how the product works
@JPRifles
2 жыл бұрын
Thanks! That's our favorite thing to do! Glad you enjoyed it. ;)
@nickystackz1278
4 жыл бұрын
Dude look like connor McGregor
@Minutes-Mils
2 жыл бұрын
Ew clamp-on blocks
@JPRifles
2 жыл бұрын
And yet, they're our best seller. Different stroke for different folks.
Пікірлер: 59