I just want to say that your video helped me. The Handbook I got with the fqx50 does not cover this at all. Your video is very professional and easy to understand. After mounting my Core, I found out that it dod not hit where the crosshairs of my scope showed. After rereading the handbook, I found out that there is a sub-menu to correct this (Pg. 15/16). My sub-menu did not come up on the screen so I sent the Core and adapter to Pulsar. I was surprised that the missing sub-menu was caused by the adapter being defect. They replaced it and I noww get the sub-menu. It would be nice if your could share any experiences you have using this sub-menu. Would make a fine follow-up Video. Thanks again.
@robertthomson8946
4 жыл бұрын
I am glad it helped. The sub-menu appears when you hold pressed left and menu buttons together for maybe 2 seconds. There are two menu options in it - The first one is for zeroing or for fixing the factory screen position calibration if the unit was damaged. When you press it there are 2 stages. Stage 1- should be a small cross and a frame. You have to move the cross to the center of the reticle using X and Y (this is done to show the clip-on where the reticle's center is located, then after saving (holding the menu button pressed) second stage apears. Stage 2 - same small cross and frame and XY coordinates. But the cross no only moves inside the frame. At this stage the small cross has to be moved to the POI. This stage shows the clip-on where the POI is. Now when the unit knows where you reticles center is and where you hit it can move the screen so as to make the hit under your reticles center. But you have to save it of course after stage 2 - long press. Second option in this menu returns the screen coordinates to default factory settings.
@jbsports3422
7 жыл бұрын
Some basic questions not answered here: 1. How do you set focus on the scope? 2. What parallax do you set the scope to? 3. Do you need to adjust parallax for shooting at different ranges (like you do normally)? 4. If so, does the unit work with a variable objective scope? 5. If not, how does the unit affect parallax? ie: Does alignment of the unit affect placement of image over the reticule?
@amirmiri3308
5 жыл бұрын
How much is each Pixel covering the Target in 100m.? How much mm. is each Klick in 100m.?
@denhollander9575
6 жыл бұрын
Koop nooit een pulsar voorzet, tussen elk schot zit 5 tot 20 cm op 100 meter verschil. Pulsar ontkent dit en in Nederland is geen contact te krijgen met de importeur. Binnenkort probeer ik zelf film te monteren waar je het in kunt zien! Graag kom ik in contact met anderen die hetzelfde probleem ondervinden, zodat wij actie kunnen ondernemen.
@cedericmeuleman4009
5 жыл бұрын
Goed om te weten misschien interessant om dit te melden op jachtsite op face book zodat alle schutters dit dure miskoop kunnen vermijden
@yonal21
7 жыл бұрын
Hi, I want to know how to get the adapter ring? How much it cost and where to buy it?Thank you.
@franciscoramirez7066
3 жыл бұрын
cuanto cuestan
@tedbaxter5234
4 жыл бұрын
Automated Narration sucks...product is substandard. Thumbs Down
Пікірлер: 9