Attempted this today. Ordered everything you recommended. Worked flawlessly! Super stoked about not having to pump the sprayers anymore!!
@thedetailingworkshop2689
Жыл бұрын
Awesome!
@twinkletoes3051
7 күн бұрын
genius thank you! My lawn sprayer is getting this modification too!
@bobyoung5389
Жыл бұрын
Converted 3 pump sprayers using your exact instructions (29/64ths indeed!) about an hour ago. Easy, peasy. Works perfectly. I used some Sil-Glyde (Silicone) lubricant on both the nipple and the bottle to aid in pulling it through the hole and seating properly. Like you, I found using a pair of Channellocks really helps! Thanks for the great tip and explanation.
@thedetailingworkshop2689
Жыл бұрын
Awesome! Glad I could help.
@adrianr514
Жыл бұрын
A couple of tips. 7/16 bit is 11.11mm which is .39mm smaller than the 11.5mm/.453" RIM valve stem making a better tighter seal and you don't need to spend $10 on a bit you will only use for this. Valve puller tools also come in handy if you already have one to pull it through without worrying about damaging it with pliers. Also 20mm/.866" Long stems are shorter and have less clearance issues. Great vid through, straight to the point.
@thedetailingworkshop2689
Жыл бұрын
Thanks for the tips!
@michlin688
Жыл бұрын
90 degree stems are even better
@functionaldoc5054
9 ай бұрын
A link on Amazon for a shorter valve ? Thanks
@leexiong9962
7 ай бұрын
The drill bit 7/16 used didn’t work. That wasn’t a good tip. Too small for the valve to fit. Use what the guy says.
@adrianr514
7 ай бұрын
@@leexiong9962 I’ve done 20 of these with a 7/16s but and a valve stem puller with zero issues. If the valve stem you’re using is larger than 11.5mm/.453” then yes you will have an issue which is why I specified those dimensions in my post.
@altillman1448
Жыл бұрын
Awesome! Seen this covered a few times randomly around the internet but NEVER with the very detailed and specific assembly parts list. Going to look for an affordable of a that long schrader valve for visual aestics.
@AuthentikADG
Жыл бұрын
I agree Miranda nailed it! #ForTheAlgorhythm #FTA
@thedetailingworkshop2689
Жыл бұрын
Thanks!
@millerdetailing4176
Жыл бұрын
Good video topic Phil I did the same to all of mine . They work so mush better than hand pumping so much.
@fireball7671
Жыл бұрын
Great one Phil! Thanks for taking the time to share that! I will be trying this.
@thedetailingworkshop2689
Жыл бұрын
You are very welcome
@RichardsWorld
2 ай бұрын
I drilled and tapped mine and I have a screw-in Shrader valve. I also used a bunch of superglue on the threads to make sure it doesn't come out. The valves you used looks a lot easier to install than what I did. Plus you don't need the NPT thread tap. I keep it going with a small battery powered tire pump. I see iK sprayers have an airpump now, also.
@ludwigkirchner08
2 ай бұрын
which tire pump?
@Carlos.Rivera
Жыл бұрын
Gonna practice with Home depot pump sprayer before going with the expensive ones
@toreansprouls1063
Жыл бұрын
This will really come in handy. Thanks for the instructional video
@functionaldoc5054
9 ай бұрын
Thanks Phil for your DIY install .
@andrewmoore9716
Жыл бұрын
Thanks Phil! I'm going to upgrade my marolex sprayer as well 👍
@davestewart9146
Жыл бұрын
Thanks Phil 👍😁
@ryanmulhearn8843
8 ай бұрын
Definitely will do this. Great video!
@MirandaDetailing
8 ай бұрын
Thanks!
@aldaley3537
Жыл бұрын
Excellent idea. My next project.
@verdantacres4460
Жыл бұрын
Awesome!!! Thank you.
@shanepowell4720
Жыл бұрын
Great video. Thank you.
@thedetailingworkshop2689
Жыл бұрын
Glad you liked it!
@randyhicks6463
Жыл бұрын
Great idea! Throw a lil grease on that valve to help push in👍
@thedetailingworkshop2689
Жыл бұрын
Good tip!
@michaelm1739
Жыл бұрын
Phil Great tip, especially for a DIY'r
@thedetailingworkshop2689
Жыл бұрын
Thanks!
@helifan2346
Жыл бұрын
Use some silicone base grease to slide the valve through the hole Silicone grease would not affect rubber as petroleum base lubricant does, it corrodes rubber. Don’t use wd40 (Water Dissipation 40) it’s not a lubricant. It dissipates water, humidity, that’s what it does, after using wd40 you have to clean the parts and use some real lubricant if that’s what you want, to lubricate Plumbers grease is the one that you want. To check for leaks, mix soap-water, dish soap, foam it up and spread it around valve. If you see bubbles popping, that’s a leak I would doubt that you have a leak as the grease would help to avoid that
@thedetailingworkshop2689
Жыл бұрын
Excellent tips!! Thanks for sharing!
@IntervalePC
Жыл бұрын
Great hack, Phil👍👍🧠🤔 Love it👌👌
@AuthentikADG
Жыл бұрын
Did this to my multi pro 2 & Marolex Axel foamer thanks for the in depth tutorial. #FTA #FORTHEALGORHYTHM
@matsudakodo
3 ай бұрын
Where did you place the valve stem?
@ericrainey5361
Ай бұрын
I have the Axel 3000 foamer. I used the 7/16-bit, dish soap and channel locks with no issue. The only issue I'm having is the pressure relief valve does not activate?? I filled it with water to the 2250 line. I put 45 psi and stopped because I'm afraid that it may blow up!! Could the relief valve be defective? Even by pumping it, the valve doesn't open.
@juliejones1776
24 күн бұрын
How long does the sprayer work between re pressurising
@chrissemsch8781
Жыл бұрын
Tip: before pulling the valve thru, spray a little wd40 or foaming glass cleaner on it. It’ll slide thru a bit easier. 😁
@thedetailingworkshop2689
Жыл бұрын
Great tip! Thanks!
@aresident7745
2 ай бұрын
spit or get some other type of slippery stuff on the valve stem first and it will pop right in. even a little soap. i'd like to have it set up to where i can just hook my compressor to the sprayer, carry it around and spray spray spray without stopping, unhook and bleed the air out, etc. that way i'm not always filling my pancake compressor for 30psi of air
@rickbarg3980
2 ай бұрын
The tire valve is different than the schrader valve.
@VassRulez
10 ай бұрын
Hi Miranda, has there been any long term issues with such a modification? Is this still something you would recommend?
@MirandaDetailing
10 ай бұрын
Hi. I still use them to this day. Phone of them have failed.
@EromliG1995
4 ай бұрын
just so you know they make those schraer valves in a shorter stem length. same size entry hole.
@thedetailingworkshop2689
4 ай бұрын
Cool! I haven’t seen them. I’ll have to search for them. Thanks
@AntLive29
Жыл бұрын
Cheap alternative to a rechargeable sprayer
@davidboyce6427
Жыл бұрын
How much pressure could the M Marolex x 3000 hold Phil? Nicely done.
@thedetailingworkshop2689
Жыл бұрын
Actually, I'm not sure because I didn't look at the pressure gauge. I simply fill it until the safety valve pops but I think last time I saw it was maybe around 20psi.
@davidboyce6427
Жыл бұрын
@@thedetailingworkshop2689 understood 👍
@Sean-ij3mi
6 ай бұрын
Awesome hack, i was wondering once filled with air to maximum if you can have enough pressure foam a car down without going to hand pumping?
@thedetailingworkshop2689
5 ай бұрын
Hi. That really depends on the size of sprayer itself. Usually these small ones will do about half the vehicle.
@wrthrash
10 ай бұрын
Mind blown!
@challengeronrift
Жыл бұрын
Great mod. Can you do this mod for a 5litre? I live in a flat and want to clean my TTS (It's a small car so can do the foam by pump but need more power for water..) Thanks!
@MirandaDetailing
Жыл бұрын
Hi. Yes you can. If it’s plastic you can do this.
@jeepinspence
Жыл бұрын
A little soapy water will help it slip in and will bubble if its leaking.
@MirandaDetailing
Жыл бұрын
Thanks! Excellent tip!
@jjazmin
Жыл бұрын
@the detailing workshop how has this been holding up? I just bought everything to do this soon and seeing how well it’s held up since you’ve done it. Thanks for the tips!
@thedetailingworkshop2689
Жыл бұрын
Hi. They work perfectly. I have had these stems on other bottles and they work great after a year of use.
@jjazmin
Жыл бұрын
@@thedetailingworkshop2689 I just did them over the weekend to 4 of my bottles and they are PERFECT
@thedetailingworkshop2689
Жыл бұрын
Awesome to hear!
@taylorshiver3284
Жыл бұрын
What about the cheaper HDX bigger garden sprayers from Home Depot? Do these styles have blowoff valves as well?
@thedetailingworkshop2689
Жыл бұрын
Hi. Yeah I have this one www.homedepot.com/p/HDX-2-Gallon-Multi-Purpose-Lawn-and-Garden-Pump-Sprayer-1502HDXA/307766539
@kimnewling5728
Жыл бұрын
Pretty cool. How long does a charge of air last on that sprayer? 1 car? Hi wife.
@thedetailingworkshop2689
Жыл бұрын
That really depends on how you're using it. for a quick app rinse you can get all around one vehicle before you need to refill. but also if you fill the bottle with too much product there isn't enough room for the air and it needs to be filled more often. lots of variables on that one.
@RMyly
Жыл бұрын
a little soap on the valve where it meets the plastic...will pull thru much easier
@thedetailingworkshop2689
Жыл бұрын
Great tip! 😎👍🏼
@wesoakes
Жыл бұрын
Do you store air in your compressor or refill it every time you work on a car?
@thedetailingworkshop2689
Жыл бұрын
Hi. My air compressor is always filled in the shop so I can use it at any given time.
@SkylarsRnD
Жыл бұрын
Curious if this would void any warranty from factory? Also is Miranda a Firefly reference?
@thedetailingworkshop2689
Жыл бұрын
Well I'm not worried about the warranty on spray bottles, but probably would void the warranty. Miranda is our last name. but Firefly is awesome!
@SkylarsRnD
Жыл бұрын
@The Detailing Workshop heck yea its awesome!!!!
@flowinthrou
Жыл бұрын
And a battery air compressor and the job is completed.
@thedetailingworkshop2689
Жыл бұрын
True! kzitem.info/news/bejne/sZhu1WZ-qWVnoHo
@1stfrompuertorico568
Жыл бұрын
First Pump it, pump it a little more. Haven't you heard technotronics song?
@thedetailingworkshop2689
Жыл бұрын
😂😂😂
@jjjjjjjjjjjhjjjjjhjj
Жыл бұрын
Why don’t the IK pump sprayers ever work I have bought about 7 of them and they all never worked what a waste of money
@thedetailingworkshop2689
Жыл бұрын
REALLY? ever since I installed the valve on my small one it works great. the problem seems to be pumping them. they need constant pressure.
@evanleebodies
5 ай бұрын
Is it a good idea to do this hack on a bottle without a pressure relief valve? Isn't there a danger of over-pressurisation and explosion if one over-pressurises the bottle?
@evanleebodies
5 ай бұрын
Correction: meant to say DON'T do this on a bottle without a pressure relief valve.
@thedetailingworkshop2689
5 ай бұрын
Hi yes. Very true. I wouldn’t install on cheaper bottle sprayers that don’t have a pressure valve.
@evanleebodies
5 ай бұрын
@@thedetailingworkshop2689 I've just converted one of my (regulated) bottles and it works like a charm! What a brilliant idea, kudos to you Sir!
@matsudakodo
3 ай бұрын
Look at the max psi and don't exceed that. Might be good to print a label with the max psi and stick it on the bottle.
@thedetailingworkshop2689
3 ай бұрын
You can. However these spray bottles have a release valve. I just fill it until the valve releases. It’s full and need exceeded the max. If it doesn’t have a release valve then yes, a label is good.
Пікірлер: 90