Sweet looking awesome build thanks for the ride along
@Littleevil9975
4 ай бұрын
Very nice I like how you set that up, I would like to build a frame like that someday that’s pretty cool
@MX-fo2nu
Ай бұрын
Cool
@jmrides777
3 ай бұрын
Cool! What size rear sprocket do you have on that build? Oh got it 96 tooth rear, nice. Now where's my crank I ordered??🤔😁
@juggaloslovejy
3 ай бұрын
One or two carburetor set up
@tonyevick434
4 ай бұрын
This is how he talks to people. Now resorting to name calling. Yes he's correct I sent alot of messages. About MY MONEY! This has been going on & on for TOO LONG. Like I mentioned...he sent $50, less than half and said "you got free parts". Not free, I paid for the parts. Im honestly afraid to just send him the parts for the balance. Itll be some other excuse & take forever. Just read how he talks to people & that's nice because #public. I said in front of everyone Id send the parts, Im not going to ruin my reputation over this. I just want my money.
@marcalampi5036
3 ай бұрын
People have made parallel twin's from the pocket bike 2 stroke engine's
@kimreeg3698
4 ай бұрын
It needs to be 'on the pipe' when the clutch engages
@ryandarrah4247
4 ай бұрын
Yes, 2800x2.1111 = 5700~ a bully set up 3600+ would hit harder. Even with its current set up performance is improved dramatically at low speed, torque at 5700 is far higher than it would be at 3k coming out of a slower corner
@ryandarrah4247
4 ай бұрын
That’s the engine, all packed. Call whenever you’re ready
@tonyevick434
3 ай бұрын
See how long that will take.
@syndeko1632
4 ай бұрын
Hey Ryan Im just wondering about my order #3060, you still havent shipped out the clutch spring and Im wondering when that will be sorted out. you already told me twice that youre shipping it out over the period of 4 months but still no updates.
@tonyevick434
4 ай бұрын
I'm serious! He gave me $50 back on a clutch I just wanted to return & he wants to debate over every word said & nit pick every aspect of it. I just wanted a simple refund and have been getting the run around for a couple months now. It's a pissing match with him. Just give me my freakin $127+ shipping minus the $50 he sent and let me bo on my way. He's dragging it out and the lawer said if he continues to drag you around and accuse you of being the bad guy we have enough on file with complaints from many others We've had contact with. This guy is SO manipulative he even tried to tell me HOW to communicate my concerns. I am the guy that IS going to sue him for multiple reasons none of which I'll go into too much detail giving him any edge. If I set up a blog explaining & showing our correspondence you'd be appalled. Over like $80 dollars now is what he owes & gave $50 & said...there free parts. Not free, I paid for those parts and want a refund. I feel as if I send back said parts I'll NEVER see my money or the parts again. Sell the stage 3 clutch parts dirt cheap or keep wasting my time with this putts. Told him over & over...I'll send the parts back with PUBLIC NOTIFICATION upon receipt of my $77+ dollars. I just can't & don't trust him now after how he's talked to me and treated this transaction like a joke. He'll reply with more BS & name calling & questioning my morals, ethics, honesty, integrity & values to misdirect readers from knowing how he performs business. I would never & have no reason to wreck someone over a $77/$80 something balance on an order. That would make me just as much of a scumbag as him. It's about principles
@syndeko1632
4 ай бұрын
@@tonyevick434 I just want my clutch spring I payed for lol
@tonyevick434
4 ай бұрын
Get your refund & I'll send you the 5th gen pressure plate, monster spring that needs modified or won't go in your case...not mentioned...stg 3 clutch pads/puks, Spacers missing 1, missing the woodruff keys but semi complete. "SEMI". It's .20-.25 longer shaft to move the drive gear out for tire clearance. Also comes with spacers to move the cover out accordingly with a longer buck bar. Nice stuff if it was complete like it was supposed to be. I went another way. RMH is a no hassle way and ya git what ya pay for.
@syndeko1632
4 ай бұрын
@@tonyevick434 Not sure if you are joking or not, how much would that cost?
@jasonburque
4 ай бұрын
Hate to be a pain but I was hoping for an up date on my order #3111 post office hasn't received the package for the label?
@tonyevick434
4 ай бұрын
Again...like on his last video post...don't hold your breath. Demand your money back NOW! Or chime in somehow with contact info & pursue this lawsuit with us. It's too many people now to just be a mistake. It's fraudulent and a felony in most states. Too frequent and way too simular story's from him, excuses. I even had someone else purchase from him and it was the same old stuff...excuses. He WILL work you over the time line & make it even tougher to get your money back. I'm NOT gonna stop posting until I get ALL my money back. I'll be on every post he makes & have people scratch their heads about sending any money. Like this flim flam video to get unsuspecting people's money & tie it up for months & months. Pipe dreams on other people's dime.
@tonyevick434
4 ай бұрын
He doesn't even deliver complete orders. And when or if he does it takes forever with threats from purchasers. How he's still in business is a crazy thing. He makes great parts but screws people over & over again
@jasonburque
4 ай бұрын
Ghosted... 😂 This is what my bank needs to see to get my money back....
@ryandarrah4247
4 ай бұрын
@@tonyevick434 who got screwed? Nobody. Glad you’re both enthusiastic about the hobby. Typically people that get emotional like you end up becoming big in the hobby. If you’re so surprised and you really think you can talk down on my business, compete against me, should be easy right? I enjoy the competition we’re all friends.
@Op1zilla
4 ай бұрын
Cool Stuff, Ill be doing a 4Stoke build one Day 👽👍🏻
@ryandarrah4247
4 ай бұрын
HD version should be available around 8 ET, same link
@WillB-lv1xg
3 ай бұрын
You're on to something with the little 4 stroke I have a gx50 clone I need to do something with my idea was put it on a goped riot. Maybe a single 50cc 4 stroke version of a China girl would be a good start that's something I'd buy
@ryandarrah4247
3 ай бұрын
thanks! definetly consiering a single chian doll style build
@ryandarrah4247
3 ай бұрын
fyi i have a LUSQI version that says "out for delivery"
@tonyevick434
3 ай бұрын
Sure it does
@breezetixmoto
3 ай бұрын
bro thats a huge fkin sprocket wtf xd, what size is that? 26" wheels? what's your max rpm?
@marcalampi5036
3 ай бұрын
I will purchase one or several once your done and selling
@tonyevick434
3 ай бұрын
Your a fool if you send him a dime.
@spongeimperium126
4 ай бұрын
Could probably make a boxer out of 2 while top ends
@rodriguezfranco3839
4 ай бұрын
Oh you still have that frame ? What kind of weld is that , I want to make me a custom frame just like that one
@kjsmolik
4 ай бұрын
Not welded. He used brazing rod
@ryandarrah4247
4 ай бұрын
Need oxy acetylene set up, ideally a gas fluxer set up. Materials are expensive all in all, lots of labor, but you can make a frame first try because the nature of the process alleys you try over and over until satisfactory quality
@jasonburque
4 ай бұрын
@@ryandarrah4247 any update on when #3111 is going to be received by the post office? It's 10 days with a label created order placed on Feb 1 for 5x mandrels, shafts, cam actuators each $521... You're not the only one who likes to ride these bikes
@ryandarrah4247
4 ай бұрын
@@jasonburque do you want it? i saw you saying you submitted a refund request, i didnt see anything on my end, but i held off shipping so i dont end up shipping parts and you get your money back.
@jasonburque
4 ай бұрын
@@ryandarrah4247 I said that to get your attention because that's what happens if you don't ship them in a reasonable time... It's up to you... I wouldn't have placed an order if I didn't want the parts... I asked about shipping time etc... Tracking something sitting there and no reply till now.. I can't get my money back if you ship them only if you don't... By starting the charge back process it protects me if they don't...
@alexanderwhite1020
3 ай бұрын
That thing is bad dude gooooood shit
@tonyevick434
4 ай бұрын
Or a 2 speed.
@jasonburque
4 ай бұрын
I have a solution for the slipping clutch??? Anyone interested? Cheap too... Nobody? Ok I'll keep it to myself 😢
@tonyevick434
4 ай бұрын
Tell me! I'm stuck with it now anyway.
@jasonburque
4 ай бұрын
@@tonyevick434 Tractor Supply Huskee 1/2" x80 'A78K/ 4L800K #44-61208 kevlar arimid belt for a mower cut up in 8mm chunks with a Coaxial Cable Cutter (the rectangle one)... Matchs the profile of the pad to the belt H-W-L in a stock clutch... It won't slip O% so it's all or nothing no feathering It will bend the pin and eat the shaft... So make a pin from an expensive drill bit and press it in there... No heavy clutch handle
@jasonburque
4 ай бұрын
@@tonyevick434 use Bell Ray Molly grease for Polaris CV joint in the clutch... Use the regular Bell Ray in the wheel bearings and the Blue and Tacky on the chain
@leonardarola
4 ай бұрын
Get a dang Merk clutch.
@tonyevick434
4 ай бұрын
Not a V twin.
@jasonburque
4 ай бұрын
No HD version of those gas tanks either
@tonyevick434
4 ай бұрын
Presale without a working prototype? So you want "US" to finance your Theoretical Concept? And if, it doesn't work out how long do the invesrors have to wait to get their money back? Just bein real.
@tonyevick434
4 ай бұрын
Presale? Hmm🤔
@ryandarrah4247
4 ай бұрын
How do you think the engine in the beginning of the video was created?
@ryandarrah4247
4 ай бұрын
What is theoretical or a concept exactly? I see an easy project in general, the challenge is how to keep prices as low as possible. The presale is the key.
@jasonburque
4 ай бұрын
Your pre pay pays for what you're seeing... Like and share you paid for it 😂
@tonyevick434
4 ай бұрын
I wanna do some cool shit to my bike. Send me money and I'll charge you for my R&D & parts & dinner with my chick & then make you wait forever till your so frustrated that you'll probably give up on me ever making good on my word. I'm gonna make it my mission to expose you Ryan. Your attitude & Snyde comments are appalling. You need a lesson taught to you to learn how NOT to treat people the way you do. I'll post mine & they will post theirs & we'll see what others think about it Ryan
@tonyevick434
4 ай бұрын
Your missing a cylinder and we cant hear any shifts from 1st to 2nd. V×2 + 2 spd is a pipe dream. Finance it with your money and then post a working "MULE". I work as an engineer in a engineering department. Your BS might get into some people's wallets but not mine ever again. Just give me my money back Ryan. I'll send your incomplete order right back to you. My name is on this post & "I" don't screw people around. Ill post the tracking number & everything for everyone to see. Better yet I can post every word of every contact we've ever had and let them decide. Your not gonna want that huh? They'll see how you talk & treat people once you've got their money.
@ryandarrah4247
4 ай бұрын
I agreed to a refund, waiting on parts. Again stop with the long message, your belief that you’re entitled to unlimited amounts of my time to correct your order is outrageous. I asked you to stop writing me chapter books and keep it brief like 20 times. You refuse. There’s literally something wrong with you. I have no idea how you’re employed
@ryandarrah4247
4 ай бұрын
I send return label, You say I still have parts can you refund anyway, I give you generous partial refund abd you still have parts…. Why write all you wrote but not actually summarize the situation!? Not interested in a pen pal or your emotions or opinions about my business
@ryandarrah4247
4 ай бұрын
FYI, insisting on telling a long story recapping everything in detail while asking for service is a common well known manipulation technique. I don’t think you’re sophisticated enough to be doing this intentionally, but none the less that’s what you are effectively doing. Sorry it didn’t work for you, I don’t respond to manipulation.
@jasonburque
4 ай бұрын
@@ryandarrah4247what about my short and to the point messages? Order #3111... I waited a reasonable amount of time after that label was created? I wanted to know when to expect these... Didn't get that answer...
@ryandarrah4247
4 ай бұрын
@@jasonburque yes, i see you saying you submitted for a refund days ago, i was going to ship that day but then held off, i also told you there was a hold-up. you ordered a wholesale deal straight from a manufacturer. if you expect amazon service go wait 3 years for China to copy what you ordered. i don't mind a refund.
Пікірлер: 74