Need to get these rust spots under control!
This is a very common issue with these bad boys. But there is a way.
I'll load up some links for the guy who goes through a more in detail way to do this.
• 80 Series Tailgate Rus...
Goes through the long way. But totally worth it.
Supplies needed:
Toyota Weather Seal (68291-60050)
Sika Primer 207 and Swabs
3M Windshield Urethane (08690)
Professional Caulk Gun (highly recommend power gun)
Toyota Factory Touch-up Paint
Alcohol or Acetone Solvent
Painters tape (highly recommend yellow Autobody tape)
PB Blaster Penetrating Oil
3/16” Diamond Braid Nylon Rope or equivalent
Sand Paper (80-220 grit)
Foam Painters Brush
Straight Razor Blade
Extendable Razor Knife
8mm Socket
10mm Socket
Phillips Head Screwdriver
Flat Head Screwdriver
Pocket Screwdriver or Bit for 3rd Brake Light Clips
Needle Nose Pliers (preferably 90 degree)
Paint Scraper
Wire Brushes (stainless bristled)
Pneumatic Grinder or Electric Sander
Body Filler Squeegee/Wedge
Plastic Trim Wedge
Windex
Paper Towels
Негізгі бет Rear window rust removal - 80 series land cruiser part 3
Пікірлер