Thank you for sharing. Been searching everywhere then I found this... 👍👍👍
@ReindeerBork
2 жыл бұрын
NP! (:
@Cmc7799
2 жыл бұрын
What seat post is that
@ReindeerBork
2 жыл бұрын
@@Cmc7799 TranzX I believe? I’d have to double check. Basically the same as any of the low end droppers.
@richardtiznadoc
2 жыл бұрын
Muchas gracias, había buscado y hay muy poca información . Excelente video 👌
@ReindeerBork
2 жыл бұрын
Cheers! (:
@davidjuarez2881
4 ай бұрын
Richard, te siguió funcionando sin causar problemas al dropper ?
@Genuino99
Жыл бұрын
Thanks for sharing. Working on mine.
@ReindeerBork
Жыл бұрын
Glad to help!
@SorinFiriza
Жыл бұрын
Thanks for the hack! Saved me from buying a shorter dropper!
@ReindeerBork
Жыл бұрын
Glad I could help!
@dakrush319
Жыл бұрын
Awesome thank you worked perfectly!
@ReindeerBork
Жыл бұрын
NP!
@jtrink
11 ай бұрын
Not sure if this will work on my Giant Contact Switch dropper…this is what I need though. Literally only 10mm to dial it in.
@santaslittlehelper760
Жыл бұрын
Legend thanks mate! Worked on my brand x ascend
@ReindeerBork
Жыл бұрын
No problem 👍
@JonssonCarl
6 ай бұрын
Thank you!
@ReindeerBork
6 ай бұрын
No Prob!
@stecifra7147
5 ай бұрын
Thanks for the video ! Do you know if it this works with crankbrothers highline dropper post?
@malloryetzkorn203
2 жыл бұрын
It looks like I have the same dropper but can’t find slots on the sides, only the front and back. Any idea why?
@ReindeerBork
2 жыл бұрын
What kind do you have? It must be a different design. There is a way you can test each key way to see if it will limit travel or not. I might be able to walk you through or just tell you what would work but without knowing what kind I would not be able to find out any more info on the design
@BenBenBenJohnson
Жыл бұрын
Hi Mallory, did you ever find a solution to this problem? Mine also only seems to have front and back slots
@robertsteven9448
2 жыл бұрын
Does this work with TranzX KITSUMA dropper external post (not the AIR model)?
@ReindeerBork
2 жыл бұрын
I have no experience with that dropper. This would probably work only with droppers that look very similar like the Brand X Ascend, PNW Ridge, Etc
@josemanueloliveira7524
Жыл бұрын
@@ReindeerBork yes it works with the TranzX there are two on the side you can feel where it is first with a zip before cutting it the one in the front the zip goes all the way in. Thanks for the video.
@DividE546
Жыл бұрын
Found the video too late and one got lost somewhere in the dropper lol. Do you think I have to take it apart or it can just chill there?
@ReindeerBork
Жыл бұрын
Personally I’d take it apart and retrieve it. But it might be okay ¯\_(ツ)_/¯
@ME-vw6tg
2 жыл бұрын
At 25mm cable length is that the height it will reduce too
@ReindeerBork
2 жыл бұрын
25mm is what I’d suggest as a minimum length to help with ease of extraction. The travel reduction will be the length minus 10mm, approximately, so 25mm shim would reduce the travel 15mm.
@ME-vw6tg
2 жыл бұрын
@@ReindeerBork thanks for the info.
@alfonsomedrano3280
Жыл бұрын
it will work on fox kashima???
@ReindeerBork
Жыл бұрын
I’m not sure, It May but I have no experience with Fox droppers
Пікірлер: 32