I swear, these CV axles are more persistent than dogs in heat.
@okamithekid9398
7 ай бұрын
Weird
@RhugidLeeHansum
Жыл бұрын
Aside from the broken axle flying out and whopping me in the back of the head giving me severe brain damage after it came out, great idea!
@fabtube7177
Ай бұрын
Now how do we get out the rest of the xv axle is what im wondering
@mmark300
10 ай бұрын
Don't go to the auto parts store -Guy with auto parts shirt on
@braidenakrtyler210
8 ай бұрын
He insinuated the majority of people who may not have the time to go and just want to do a quick method with whatever might be laying around
@closeenoughmechanics
2 жыл бұрын
Good way to get summer teeth too! Sum are here, sum are there…. Lol
@Spartan-Of-Truth
3 ай бұрын
😂
@robertcoleman9225
17 күн бұрын
Great way, I have watched a lot videos on this, this guy seems for real.
@alnorth612
2 жыл бұрын
Axle is gonna pop out most of the times and hit u on the knees at least 80% of the times, but u gonna get that axle out
@nightmaremike1092
Жыл бұрын
Lol
@touristtom5675
3 жыл бұрын
You've just earned my subscription
@The_BEXpedition
11 ай бұрын
Just used a version of this for my atv with the inner cv being the only thing left for the axle. Placed a clamp on each side, wrapped a strap around both clamps and swung the hammer, sucker popped right out! Thank you so much!!
@justaguy427
Жыл бұрын
I used this method on a toyota corolla today. Worked good. Took about 4 swings.
@nevinkuser9892
Жыл бұрын
haha. That's awesome. I thought he was just gonna throw the hammer.
@fiercefix
Жыл бұрын
Tie another piece to something heavy the other side with a bit of slack enough to allow the shaft to come out but not fly like super shaft & smash something like a leg . Otherwise good tip .
@yensabi
Жыл бұрын
I pulled a couple of my teeth out during no dentist lockdown using a very similar method , worked a treat..... 👍
@gmanrc1576
Жыл бұрын
Screw my cv axle puller, this worked like a champ
@WKRP187
Жыл бұрын
You sir are a hero without a cape on!! I've fwd this to at least 5 shade tree mechanic buddies of mine
@normanmartin2497
Жыл бұрын
You deserve a raise
@bbblahoo7
Ай бұрын
I wish this would work when the cv is stuck in the wheel hub but that’s a really cool trick! That pop sounds was satisfying
@user-ld2oh8du7x
Жыл бұрын
Thanks so much for this tip! I tried this yesterday on my 2017 Polaris Ranger's rear cv axle shaft and it worked! I used a sledge hammer and a tow strap. It took me about 20ish swings, but it eventually came out. This saved me from bringing it into the shop. Thanks again!
@BertKoorn
Жыл бұрын
Used the technique on a propshaft on a yamaha outboard... worked perfectly. Thanks!!!
@shanewestphal1557
9 күн бұрын
Good idea. My control arm broke and tore out the cv axle. The housing is stuck in there fairly well. I may give this a shot.
@callmecuz
8 ай бұрын
My Man ! You are a Freakin Genius !!!!
@HiTheNameIsBj
3 жыл бұрын
I just tried this and the cv just popped apart. Sportsman 700, I've tried everything at this point.
@jakesatvrepairandmore1346
3 жыл бұрын
Exactly the same thing happened to me any suggestions
@HiTheNameIsBj
3 жыл бұрын
@@jakesatvrepairandmore1346 I ended up getting a 3 or 3.5 inch muffler clamp from autozone and clampdd my tow strap directly to part of the axle before the cv joint. Pretty much the part thats the size of a soup can.I still had to beat the ever living hell out of it to get it out.
@futileskills
3 ай бұрын
Yo! Thanks man! This shit just worked with my 91 toyota celica lol.
@LegoDude182
24 күн бұрын
Wtf im about to use this on my 90 celica.. small world hahaha
@futileskills
24 күн бұрын
@LegoDude182 that's awesome lol. How's your build going? I'm stuck on month 2 waiting for the new connector rods
@LegoDude182
24 күн бұрын
@futileskills oh boy, well I got my cv in like 5 mins ago! I have a 3sgte im going to build and swap in, it'll be easy because I have a 3sge in mine, it's a gtr trim from japan! Wby?
@futileskills
24 күн бұрын
@@LegoDude182unfortunately mine is the stock 1.6 4afe. I got the engine and trans pulled and I dropped the gas tank last week to clean and replace the pump. I got all the parts in for the total rebuild besides those rods lol. So I'm just waiting to get those in so I can put it back together. (I'm just praying I can remember where all the bolts go. God knows I'll have extra when I'm done lmfao)
@ObeyDeFi
Ай бұрын
He's watched him fight with it for over an hour and finally shows him 😂
@ozzlyblime
11 ай бұрын
Tried and true... Thank you. You saved me a $100 tool.
@taylorhaworth3983
Ай бұрын
Worked like a charm! Was fighting that damn thing and it came right out
@meandmycrazyworld8705
Жыл бұрын
Thank you for this video we tried everything and then this, with a few hard pulls the axle pooped right out!
@portawrap2
9 ай бұрын
Thank you saved my sanity! Worked like a charm!
@ED-es2qv
Жыл бұрын
Nice! Reminds me of bolting a logging chain to a drum brake and making a whip motion. I like yours way better.
@brentranger8115
2 жыл бұрын
That was awesome! I tried your method on my ATV, it worked perfectly! Thanks
@optimoprimo132
Жыл бұрын
Thats what i have done in the past as well. Sometimes they come right out by hand and sometimes you could be dragging the quad around the garage by the axle. I used a strap and full sledge and a bungee cord to hang the axle as straight as possible and then pull. I didnt give full swing but started lightly and then increased swing till it popped.
@tylerb3023
5 ай бұрын
Risk snapping the cv axle in half and you will end up with the inner spline still stuck in the trans. This is a good method if you are planning on replacing the cv axle
@elkhunter307
3 ай бұрын
Dude….. you just saved me a 45 min ride to row. To get a slide hammer! Thank you!
@jahleelpouncil5240
5 ай бұрын
It worked! A makeshift slide hammer, was trying to get it off with pry bars etc and saw this video, had to try for a good 5 minutes and harder each time, but it finally came out. Was about to take it to a mechanic :(
@jahleelpouncil5240
5 ай бұрын
Ps I did this trick on my 2013 Chevy Malibu
@andreh.dupuis8475
2 жыл бұрын
interesting and simple, again a few ways to remove the axle, depending on the rust and seizure some methods will work, if not you need to escalade to other methods.. hard to say a single method works everytime since it’s a case by case basis, will add to my list, thanks
@levichandler1800
14 күн бұрын
I tried it as a last resort and can confirm it works
@xface22
11 ай бұрын
I grinded a slit into it and used the claw part of my hammer to yank it out like a nail. it worked
@chasemika3836
Жыл бұрын
I’ve been fighting with mine for about 4 hrs. Imma try this out.
@cloudnurdz6331
Жыл бұрын
did it work?
@jayonefive234
9 ай бұрын
nah homie died@@cloudnurdz6331
@Brandon-yq1tm
4 ай бұрын
I used a rope tied around the axle and wrapped the rope around myself and tugged while also using my body weight. Fell on my ass but I was laughing because it was finally out.
@clearview2311
2 ай бұрын
best idea I've seen yet!!
@bradytrotman4726
2 жыл бұрын
Just tried this!! I was very skeptical about this at first!! But I’ll be damned if I worked lol 😂
@pedrohdz1964
Жыл бұрын
Let's go y'all 👏👏👏👏
@user-uj1fe1ud6s
Жыл бұрын
Thank you I been fighting for hours
@russelljay4256
4 ай бұрын
Tried it and didn't. So went to plan B. Items used: 1.Jeep trailer hitch chain hole 2. A Come along 3. Extra watch strap tied around the axle and tied in to a loop 4.Vice grips. 5. 5pound sledge.. Hook the come along to the jeep, hook to the loop tied to the axle. Add tension, use Vice grip and clamp to axle and use sledge and hit vice grip. Worked like a charm.
@jermainephillips5179
4 ай бұрын
Ill try this tomorrow after work.sportsman 600 front aint cooperating
@thomasevans2309
6 ай бұрын
I was thinking this is a Joke 😂😂
@johnyindiveri7744
7 ай бұрын
Man that looked like it was about to go bad 😂😂😂 fuck yeah man awesome tip 🤘🤘
@user-ip5ox4gy9g
Жыл бұрын
It works!! Thanks guys
@joshmclemore6238
10 ай бұрын
Thank you
@nickchristopher6961
Жыл бұрын
Thanks a lot
@bingk398
2 жыл бұрын
This worked!! Thx you soo much
@yaekobsefu6352
Жыл бұрын
Really you are so awesome!
@Sunsworn
Жыл бұрын
is that just one end of the cv axle though? if the part that goes into differential is stuck take some vice grips and clap on the metal boot going in diff and use old axle bar as a slide hammer.
@mpaxton6686
Жыл бұрын
Worked amazing
@shealdedmon7027
Жыл бұрын
Thanks a million!
@Thomas998822
6 ай бұрын
I thought he was gonna chuck the hammer into the next yard
@guss1470
6 ай бұрын
I have an 8 lb sledge with a short handle... you think that will work???
@danmack9827
7 күн бұрын
Hey buddy I’m thinking of trying it on my Honda Legend 2007 hope it works on a car, anyways hope you do well 👍
@landonhollowell4802
Жыл бұрын
that helped alot man thx
@Chu3505
7 ай бұрын
😂..So you do it with the HEMAN ways.Uses yours GOD giving muscles 💪..
@kellykolnes1954
Жыл бұрын
What's the tourque on the axle nut
@BlckJack-vk6cq
21 күн бұрын
🔥🔥🔥🔥
@yrusonoz5574
10 ай бұрын
I did that to my wife's 2k Pontiac grand prix because the cv was stuck except I used 20lb sledgehammer and a long chain lol
@user-vd7vw2pv9g
Ай бұрын
Well I'd love to see ya get the one out of my ram I'm working on,I used a chain and big sledge not a mini and ya it broke cv still in I used a roughly 15 to 20lb lead weight and got momentum and fired that som bitch and I'm here ta tell ya it was a big jolt and yep still in
@mikeryan3188
10 ай бұрын
The ol "Guten tight" method if you're scrolling through comments, go get the slide hammer, yeah you can be a dumb and impatient but you risk damaging the rear diff. You can rent the slide hammer and return it full refund
@The4thshodow
6 ай бұрын
Gold
@nickchristopher6961
Жыл бұрын
It worked in my sportsman 850
@rocksev21
2 ай бұрын
There goes my rotator cup
@jrod7065
9 ай бұрын
The best cheapest and easy way and more money stay on the pocket
@lucasschomaker7380
10 ай бұрын
I just had this problem a couple days ago with my car. Ended up welding a piece of 1x20 plate steel to it, throwing a pipe over it, welding a piece perpendicular, and slamming the pipe up against the perpendicular piece got her loose.
@user-gs1hw1gg7m
5 ай бұрын
i been fighting with my Honda 300 front dif axles for 2 straight days wasted money on slide hammer.. broke a winch cable on side by sideit will not come out either one of them...
@chrisemerson7743
10 ай бұрын
Atta boy!
@raylewis4410
Жыл бұрын
Hill Billy style
@davidschlarp1606
3 ай бұрын
Not everytime. I tride this and first pulled the boot and cup off. Then tried again and pulled the axle out of the other cup. The cup stayed in the diff
@MintyFreshTurds
Жыл бұрын
W.T.F'n.F 😳🤯. No more pry bar marks left behind changing CVs.
@krunk9644
2 ай бұрын
gangster
@joehayward2631
11 ай бұрын
Im hoping this works removing the rear axles. Thanks
@steve2jz664
Жыл бұрын
Ima try this one
@randyrhodes9124
Жыл бұрын
well dang boy do a video on how to get a stuck axel out the hub lol
@Jay2Raw
Жыл бұрын
@usarmykirby nah fr tho
@ThatTinyOutlander
Жыл бұрын
Genius
@Michael-Benjamin1224
9 ай бұрын
How about I tie that strap to my Louisville slugger & go DEEP. I’m thinking that should work, no?
@frankmontez6853
10 ай бұрын
About to go to junkyard and get me one . I hope it’s not that hard to pull out . I forgot my strap…
@Walkermccreight
Жыл бұрын
Help please my axle won’t come out
@jamescameron2134
Жыл бұрын
I thought he was gonna throw the hammer
@christopherhall4270
3 ай бұрын
Used this on my buick
@chrisvazquez4080
Жыл бұрын
Dude, I've been stuck for 2 hours. Watch this and f it, and a few wacks later popped right out
@user-be4ok4ir2f
4 ай бұрын
Joking 😂😂😂
@YouTube_Executive_01
2 ай бұрын
Now u have to remove the part still stuck , you gutted it
@alexparker9503
Ай бұрын
So that how y'all do it
@waynewoodz
11 ай бұрын
Like pulling teeth.
@thename9552
Ай бұрын
Great way to brake your wrist
@thename9552
Ай бұрын
Trust me. Mines on ice
@JesusRodriguez-rd6lq
Жыл бұрын
😂❤ DAMMMMM
@rory506
Жыл бұрын
Lmao did this with my 21 1000hl and the cups on the end of the cv axle stayed it the diff while the axle came out cups been stuck for 3 months
@jacobkoon2119
3 ай бұрын
Mine was way more stuck than that
@lucada8538
Жыл бұрын
That doesn't work all the time, try that once and it left just the tulip stuck into the transmission
@Fit.For.A.Firefight.
2 жыл бұрын
This doesn’t work on an suv or truck, just fyi
@tylermoore7777
2 жыл бұрын
It definitely does. Takes a little bit more force and multiple tries.
@optimoprimo132
Жыл бұрын
1. He isn't demonstrating on a truck unless my eyes deceive me. 2. Having said that however... Why wouldn't it? Both CV axles in quads, side by sides, cars and trucks are designed to be taken off by hand in normal circumstances. Most people tug truck and car cv joints out by hand as their suppose to. However sometimes they need some encouragement and better leverage. That is why a slide tool was invented for all vehicles. This is just another version. Funny thing is you were so confident in your comment.
@Fit.For.A.Firefight.
Жыл бұрын
@@optimoprimo132 1. I was working on an old jeep which was about the size of an ATV. 2. I’m aware of slide tools, but didn’t have one when I was working on that project. 3. You’re a tool. I’m very confident about that.
@optimoprimo132
Жыл бұрын
@@Fit.For.A.Firefight. Yes. You are correct.
@gregberube723
2 жыл бұрын
That's bad *ss gonna try it before making a slide hammer
@joshsanders4786
Ай бұрын
Year make and model lol
@mattthomas1369
2 жыл бұрын
And deal with a bruised leg
@dec0y0ctopus62
2 жыл бұрын
How do you get the axle bolt out when the axles already broken and it just spins
@sienile
Жыл бұрын
Jam the brake so it doesn't spin.
@carrollrichardssr.9842
11 ай бұрын
All that's gonna do is pull the spindle part out the part that has the spline and goes into trans gear will still be there !
Пікірлер: 124