Thanks, your video 0:31 was helpful & it was an easy repair. Your suggestion and hands on with video made a big difference when doing my job.
@appliance63
Ай бұрын
Glad it helped
@JerryPearson-di3wd
2 ай бұрын
Thanks for the instructions. Water pump went out with the OE message. Fixed it thanks to you
@appliance63
2 ай бұрын
Great job!
@user-gi1xr8tf1p
7 ай бұрын
Is 12:30 at night, I’m female and have never worked on a washer before but, my drain pump went out and husband keeps telling me he will get to it. LoL. I stopped holding my breath and found your tutorial and it’s helping me a lot so thank you. I still haven’t figured out how to take a screw from the bottom piece off because is so tight but I’m working on it.
@appliance63
7 ай бұрын
See if a bigger phillips screw driver can help with the tight screw. At the same time push in and turn counter clockwise. Sometimes a screw can be to tight.
@user-gi1xr8tf1p
7 ай бұрын
@@appliance63 got it! Thanks
@glenbaker5260
5 ай бұрын
Followed these steps and it was so easy. Thank you so much for this video, you explained everything perfectly. I now have a working washer for the price of a new pump (about $50) and a couple hours of my time. Thanks again.
@appliance63
5 ай бұрын
Glad it helped!
@EGO_33
Жыл бұрын
Thanks for the quick and professional service.
@appliance63
Жыл бұрын
Our pleasure!
@IDAHOJAKE
28 күн бұрын
Yup every single. Day. You get pretty fast at it. Lg refrigerator compressors and washer pumps etc get pretty simple after a 1000 of them
@davidturk6170
Ай бұрын
Great video, however I just saw another internet video that avoids removing any panels. Instead, you disconnect the power and two water lines feeding water to the washer (at the washer). Drain the filter tube. Remove the cover in the filter tube area (as shown in this video). Then position the washer so you can tilt it backwards approximately 30-45 degrees; enough to allow you access unearth the washer. Then remove the three screws in the front of the pump (if all three are present, mine weren’t) and the screws underneath. Then you can remove the pump and all attached parts easily from underneath. The biggest caution is bracing the washer so that when you tilt it, it cannot slide and fall. Mine is leaning against the wall.
@andrewkeeleyyonda
Ай бұрын
Can you link to that video? That sounds like the way to go
@davidturk6170
Ай бұрын
@@andrewkeeleyyonda - kzitem.info/news/bejne/w3l5tGh6bpibhI4si=hy-itjBMTMzPKYGw Good luck!
Пікірлер: 23