Short video demonstrate Ball Joint replacement. Step to change ball joint:
1. Jack both front wheels (use jack stand)
2. Take out both wheels
3. Release stabilizer link (14 mm socket)
4. Loosen ball joint nut (17 mm socket)
5. Use ball joint extractor to release ball joint
6. Use 17 mm socket to take out 3 units bolts from lower arm.
7. Take out lower arm (might need rubber hammer)
8. Press the old ball joint out from lower arm (need proper hidraulic press)
9. Insert the new ball joint on lower arm. (need proper hidraulic press)
10. Reverse the process 7 till jack down.
Негізгі бет Replace Honda Stream RN6 Lower Arm Ball Joint
No video
Пікірлер: 19