For the M5 it's the same process? I try to look for the video, but i just get results for the m5s and the m5s pro
@FruitBanana420
2 ай бұрын
They basically have the exact same vat, I think I even saw someone just swapping out one for the other, so yes, probably
@markburton5292
Жыл бұрын
replace it with nfep. acf is cloudy and lowers details I want details over speed so i am using nfep
@q2lamer
Жыл бұрын
how long does the Nfep hold ? i have to exchange acf all 3-5 days i get poor by this.
@markburton5292
Жыл бұрын
@@q2lamer i have been using the same nfep for 3 weeks so far no issues still looks good to me. but then i ran the acf with no issues as far as wear for about the same before i change mine to nfep for better details
@q2lamer
Жыл бұрын
I made new acf film the old 3 days old got many thin deep scratches like u scratch it with needle now with new acf I get rectangular blocks of pure cured resin on the print plate I think I have a "Monday" machine I think the lcd is gone
@nunnadismattas5225
Жыл бұрын
I used the film that came with the printer and it lasted about 5-6 days of printing. Tiny holes invisible to the eye appeared and ruined a screen protector when the resin leaked through. Replaced with nfep, just printed my first batch of minis and my god, what a difference in quality. Don't know about longevity yet but won't go back to the cloudy film that comes with the printer that is easily ruined. It annoys me that so soon after buying the printer I had to replace the fep and spend an unholy amount on replacements but I can't fault this guide or this comment.
@Abraksas112
4 ай бұрын
@@nunnadismattas5225if it doesn't even last 6 days then you're doing something wrong.
@sarahperso6445
11 ай бұрын
j'ai fait 90 impressions en rapide et 6 en résine flex ( connu pour détériorer plus vite les fep ) donc pas moins de 96 impressions ( sans compter les ratés ) avant d'avoir a changer le film fep. franchement cette imprimante est pour moi la meilleurs, faut juste savoir s'en servir XD
@miroruniverse5622
11 ай бұрын
Impossible for us to know the mat side, it's the side with blue protection or the other one ?
@sarahperso6445
11 ай бұрын
if you don't want to see the difference, either it's not a fep for the m5s or you need glasses x 1000. In short, the matte side (i.e. the screen side) is the side with the blue protective film: PS it's marked on it if you haven't bought something adaptable.
@miroruniverse5622
11 ай бұрын
@@sarahperso6445 i've buy the lot of 5 NFEP relaease film for 3D Printer and no stickers on film, no sticker on the circular box; and no differences on each side from the opinion of 4 different people; Is anycubic store make a mistake ?
@sarahperso6445
11 ай бұрын
yes, because for this original printer they are not NFEP@@miroruniverse5622
@sarahperso6445
11 ай бұрын
image.noelshack.com/fichiers/2023/44/4/1698938411-anycubic-film-fep-photon-mono-m5s-2er-set-573049-fr.jpg Here's the right original film for the m5s photo
@kubicats7150
5 ай бұрын
Why are the films not available ready cut? For the high price you should be able to expect that!
@jaydandudek2611
4 ай бұрын
I thought the same thing when I first started watching the video, but after watching the instalation process, this does seem like it will be easier since you don't have to make it a perfectly lineup with the edges of the vat.
@Abraksas112
4 ай бұрын
Because if they did you'd wish they wouldn't cut it to the exact size. And is it really so much effort to take a sharp knife and cut the excess off?
@allasar
2 ай бұрын
How are you going to tighten the film if it is already cut to the final size? Would be almost impossible to replace. A larger size makes things so much easier, so less finicky.
@davidc7763
3 ай бұрын
Why not just trim some excess with scissors before screwing it into the vat? Then you don't have to use a knife on the metal frame
@q2lamer
Жыл бұрын
this is insane i have like 5 prints ALL SLOW Printing and it destroys ACF so fast if it is like this i have to change it every 3 days elegoo saturn 3 ultra have same acf film i print highspeed with normal abs like resin and it overpasses the overall status by 20. i dont know if i have a bad machine but its insane how the acf film looks after 3 days.. im not happy with the m5s. i hope they will fix it.
@mcmustachephd
Жыл бұрын
I'm having the same experience. Next time, I'm sticking with Elegoo.
@sarahperso6445
11 ай бұрын
j'ai fait 90 impressions en rapide et 6 en résine flex ( connu pour détériorer plus vite les fep ) donc pas moins de 96 impressions ( sans compter les ratés ) avant d'avoir a changer le film fep. A mon avis tu a un problème sur tes réglages ou ton imprimante est mal calé. English I made 90 prints with rapid and 6 with flex resin (known to deteriorate fep faster), so no less than 96 prints (not counting printing errors) before I had to change the fep film. In my opinion, you either have a setting problem or your printer is badly adjusted.
@bitosdelaplaya
7 ай бұрын
@@sarahperso6445Bonjour. Tu utilise un film FEP ou l'acf d'anycubic ????? MErci.
@sarahperso6445
5 ай бұрын
@@bitosdelaplaya désolé pas vu la question, je n'utilise que des produits anycubic pour mes imprimantes anycubic. et pour le film c'est du FEP. Qui est le film officiel pour ma M5S
@bitosdelaplaya
5 ай бұрын
@@sarahperso6445 Ok merci. Il me semble que le film officiel pour la m5s est l'acf (trouble) et non le FEP (transparent). Merci quand meme pour ta reponse
@waywatcher5
10 ай бұрын
Why on earth does he spin it around before putting the frame on the vat XD
Пікірлер: 32