Another great video Lee. The horn on my TF was not working and I replace the rotary coupler. There was no need to remove the horn buttons, just disconnect on the black connector above the column and they stay with the wheel. Also rotary couplers are available on Fleabay without buying the whole stalk assembly, under a tenner. Finally I hard wired the cables under the seat to get rid of dodgy connection issues. Best wishes for the MOT
@stevehwozdyk8801
Жыл бұрын
Cheers Lee. My horn stopped working in my MGF. I wasn't confident in doing it myself, but with your video, mission accomplished.
@zaccwinch3468
2 жыл бұрын
Hi Lee, great video! I had to change the rotary coupler as the horn wasn't working, followed your video, minus removing the horn buttons as they come off with the wheel. But I now have a fully working horn, keep it up!
@mg-stuff
5 ай бұрын
Thanks so much for this great video. I had a PSACN error code and stuck on SRS light and feedback was "rotary coupler" - even though the horn was working. This helped me change it out on a 97 MGF. A few differences and I found I didn't need to remove the horn buttons just the connector. Super, super helpful! 👍
@darrenball4620
Жыл бұрын
Just ordered a coupler for mine in the hope the horn will start working for the mot in a few weeks. Very useful video!
@darrenball4620
Жыл бұрын
Coupler fitted today, horn working again! What a relief, fingers crossed that's it for my mot next month...
@markfourtyeight
3 жыл бұрын
Well that was good, nice to know about the rotary coupler, i disconnected mine when i changed the track control arms, luckily i didn't turn the wheel! Thanks Lee, nicely done.
@Savagely1
3 жыл бұрын
Thanks for the video Lee, I've got an intermittent SRS light issue on my TF, you've given me a bit more confidence to poke around behind the wheel as the rotary coupler is the main suspect after the under seat connector which I've fiddled with at length already.
@mdgg55
2 жыл бұрын
Great video as usual 👌. I had to replace the rotary coupler on my recently purchased TF. It had passed it's MOT just before I bought it,so was baffled by the horn not working. The fan only works on the higher settings and have bought the replacement part required to fix it as it's a fairly easy repair.....unless you have air con like mine!! So will have to take the car to a garage, and I so resent the hourly rates garages charge, but it hasn't taken me long to realise you have to expect financial outlay when you have a MG F or TF 🤑🤑😉
@AllMy78s
3 жыл бұрын
Excellent video Lee, very informative well filmed, and presented... Thank you...
@shennmack
Жыл бұрын
Just replaced the rotary coupler on my 1999 rover mini cooper,exact same set up as the mg....this video was a great help.
@garys6583
3 жыл бұрын
Great info on the rotary coupler and nicely explained , top video again
@gooslindeboom9213
3 жыл бұрын
Did not know that, so i’v learned again thx
@phillippointon5031
3 жыл бұрын
I hate being right 🤫 but I've been there myself 😂 good luck tomorrow Lee 🤞
@bones1th
3 жыл бұрын
Good video mate thanks for the info , and hope mot went well mate.
@PeeJay7290
3 жыл бұрын
I saw you jump when the airbag popped out, don’t think we missed it :p To be honest I don’t think I’d have the guts to touch it!
@wheatleysworkshop
3 жыл бұрын
I'm not gonna lie.....I did!!! Lol 😆
@ThePCPitChannel
3 жыл бұрын
@@wheatleysworkshop :D
@Ultrarunnerdad
3 жыл бұрын
Just had to do the same job too!
@broomad
3 жыл бұрын
Looking forward to Friday's video - did it pass or didn't it :-)
@ErikB750
3 жыл бұрын
As stated earlier, this footage shows a few more steps than actually needed to just replace the rotary coupler. Waiting eagerly to discover what the MOT revealed.
@danielorabona8724
3 жыл бұрын
I have done this job twice, nice easy one but there is no need to remove the horn buttons.
@evgenyknafel2857
3 жыл бұрын
How did the MOT go??!?
@wheatleysworkshop
3 жыл бұрын
Dropping the video this Friday...there's good news and bad news lol 🙄😖
Пікірлер: 24