I like the way the handle turned out. Great job bud!
@markschwegler1100
3 жыл бұрын
Always great to see tools back to full function! Just need to restore a set of mortis chisels. Small job but still beautiful. The custom epoxy art on the bolster was cool looking!
@MuhammadDaudkhanTV100
3 жыл бұрын
So super and great thanks
@nickbremner6274
3 жыл бұрын
A beautiful restoration of a very tired and abused looking mortice chisel into a tool that anyone would be proud to own and use.
@lisapino6739
2 жыл бұрын
Amazing restoration. The handle came out exspecially beautiful. Great job.
@ИринаВралова
3 жыл бұрын
Браво!!!!!!!!!!!! у вас руки растут с правильного места так держать 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 ждём новых видео
@alantan6255
3 жыл бұрын
Good job well done great restoration enjoyed the video is great so much relax
@ralphreinhardt6020
3 жыл бұрын
Looks and works great. You did a nice job with restoration. 😎👍
@nitro74cs
3 жыл бұрын
Very nice, very good
@diegochavarri3137
3 жыл бұрын
Hola...gran trabajo amigo....me encanto como quedo el mango con madera y metal....
@arnaufont1204
3 жыл бұрын
After a long and hard day both at work and at home, your video gave me the calm to go to bed peacefully. And fot that I would like to thank you. Watching you work and doing a great job, is always a pleasure. And congratulations on that handle, the upper part looks awesome!!
@ScrewsAndTools
3 жыл бұрын
Thank you very much! I am very happy to hear this and appreciate it!
@oherman
3 жыл бұрын
I'd be actually surprised if this was followed by a cooking segment using the chisel lol Good work.
@garymucher9590
3 жыл бұрын
Bringing back a damaged tool is always a good thing. Nice repairs and refinishing. Thumbs Up!
@RustyCraftsman
3 жыл бұрын
Упорство и труд! :))) даже просто глядя на вторую битую заготовку чуть не прослезился, представляю каково было вам! Приятно смотреть на вашу работу. Всегда интересно!
@vinceianni4026
3 жыл бұрын
Hello mister screws beautiful restoration good job well done my friend
@Chevelle_addict
3 жыл бұрын
Another great old tool saved from the scrap yard. Thank you, keep up the awesome work.
@maturefox1
2 жыл бұрын
.... thaaaaaat's a nice job - well done! I like especially the black epoxy on the handle.
@62forged
3 жыл бұрын
Great job!
@GT_Racer347
3 жыл бұрын
Sweet 👍🏻 👍🏻
@potatie_huh
3 жыл бұрын
Third time's a charm with that handle. What a beautiful job you did, I think it's one of your best so far! Very well done sir!!
@ScrewsAndTools
3 жыл бұрын
Thank you so much!
@BukmopZender
3 жыл бұрын
Всё больше и больше новых технологий и техники) так держать) всегда интересно смотреть)
@ScrewsAndTools
3 жыл бұрын
Spasibo!
@katrinamenio3230
3 жыл бұрын
Good work on the handle especially
@experimentsvs4270
3 жыл бұрын
Great work my friend! Nice chisel.
@---up2ru
3 жыл бұрын
Отличная работа. Молодец что говоришь по русски. 👍
@RobertSmithLLT
3 жыл бұрын
You sir, are a master.
@quentinlynch
3 жыл бұрын
Now that looks amazing!
@mikecruz6916
3 жыл бұрын
very nice restoration of the chisel liked what you did with the handle very awesome job
@stevenjennings8347
3 жыл бұрын
Awesome informational educational video experience Y'alls God Bless Ya 🙏 ❤
@antonioparra4979
3 жыл бұрын
muy buen trabajo señor gracias por el video.
@Diadalus-23
3 жыл бұрын
Шикарная работа. Инструмент получил вторую жизнь.
@paulorth2251
3 жыл бұрын
Like the crown detail on the ring.
@bohdangt6664
3 жыл бұрын
Thank you for video. This is a good chisel, work the work was worth it. Good luck you 🍀
@RestorationAustralia
3 жыл бұрын
Looks great well done.
@customrestoration5317
3 жыл бұрын
Pretty *awesome work* buddy 😊👍 *great* idea with *glue* looks like *resin* 😊
@angelterral5865
3 жыл бұрын
Que bien quedo, felicidades por el trabajo , un saludo
@javertnator9881
3 жыл бұрын
excellent travail bravo congratulation for you work
@robertovillalobos4798
3 жыл бұрын
Excelente trabajo 👍 me gustó lo del mango pero salió bien bonito. . Saludos mi hermano desde Venezuela ciudad de Maracaibo
@oleg2000
3 жыл бұрын
Новый станок, - Поздравляю с приобретением! 👍
@ScrewsAndTools
3 жыл бұрын
Eshe v proshlom godu v marte kupil, prostoi ochen no luche chem nichego, ia poka uchus) Spasibo za vnimanie.
@stephenbridges2791
3 жыл бұрын
Very nice job! I like the collar.
@oneshotme
3 жыл бұрын
Enjoyed your video and I gave it a Thumbs Up
@ArtisticEndeavors
3 жыл бұрын
Nicely done - thank you! ✌🏻🎨☕️
@davidcox2264
3 жыл бұрын
Very nice.
@RESTORATIONOFSCRAPMETAL
3 жыл бұрын
Great job, you are a master of your craft👍
@alexch7751
3 жыл бұрын
Как всегда отличная работа.
@markbir7979
3 жыл бұрын
Outstanding job! You do pretty work.
@aaronbeatty1153
3 жыл бұрын
Awesome once again.
@tntchitwood
3 жыл бұрын
Good stuff man. Beautiful
@rlm98253
3 жыл бұрын
Once again, well done, sir
@Renat-86
3 жыл бұрын
Замечательно!
@dewyanehamm3956
3 жыл бұрын
Beautiful !
@tctc8578
3 жыл бұрын
Great job, nice detail on the handle too 👍
@restorationconstantines7731
3 жыл бұрын
great job👍
@katiebellmichelle
3 жыл бұрын
Amazing! 🤩 I love this! Watching the saw go through the metal tube at that angle was so satisfying
@ScrewsAndTools
3 жыл бұрын
Thanks ^_^
@douglasfathers4848
3 жыл бұрын
Looks better then New mate , The handle turned out grate . :)
@hakanceylan116
3 жыл бұрын
Good work 😉
@SuperMoriarty
3 жыл бұрын
Superb work. Thank you for uploading the video. (Nice glue board too)
@BrothersRestorationIndustry
3 жыл бұрын
Amazing
@markjeffels3327
3 жыл бұрын
Great work!!
@donaldboyce7110
3 жыл бұрын
Very impressive 👍🔥
@rodger9948
3 жыл бұрын
Good JOB!
@BiayOrze
2 жыл бұрын
Piękna robota
@lucialima781
2 жыл бұрын
Belissimo trabalho É bonito de se ver as pessoas refazendo as coisas Não tem preço
@cliftonshotwell7847
2 жыл бұрын
Really nice job!
@19Bmiller
3 жыл бұрын
Very good job
@ussdiscovery6912
3 жыл бұрын
Awesome Restoration! Well Done Mate! ✔ Love th the New handle.
@Марат-ь6л
3 жыл бұрын
Рукоять просто бомба 💣
@chuckuu9294
3 жыл бұрын
You amaze me the way you take rust and turn it into gold. Good job brother
@ScrewsAndTools
3 жыл бұрын
Thank you)
@ИгорьМакаров-п3н
3 жыл бұрын
Класно получилось,Молодец.
@packerbacker9109
3 жыл бұрын
Damn good. Looks great!
@scottdostie3239
3 жыл бұрын
Man that’s nice!!
@NarTac13
3 жыл бұрын
Very cool!
@markomarkus6506
3 жыл бұрын
Też lubię herbatę z cytryną.
@siexoydiy8
3 жыл бұрын
so good and easy for you :D
@fishooman7030
3 жыл бұрын
Молодец! Теперь тиски отремонтируй! Спасибо за интересные ролики👍🏻
@ScrewsAndTools
3 жыл бұрын
Да их давно пора, обязательно сделаю.
@ВиталийЗахаров-п2ь
3 жыл бұрын
Упорство и труд👍, как же ты прав дружище.
@VitorVl98
3 жыл бұрын
Simplesmente Incrível
@lourias
3 жыл бұрын
Your shaft on the grinder is bent, it the grinding wheel is seriously out of round. The end result looks fantastic!
@ИванДергунов-д6ь
3 жыл бұрын
Horohaiy rabota myzik)
@ScrewsAndTools
3 жыл бұрын
Blagodaru!)
@DécioBarreto-b9g
Жыл бұрын
Impressionante
@persioboni9373
3 жыл бұрын
Muito bom !
@АндрейМилош-п1я
3 жыл бұрын
Отличьная работа
@artemragnik1323
3 жыл бұрын
Жду реставраций более больших предметов, а так видео отличное:)
@ScrewsAndTools
3 жыл бұрын
Spasibo! ^_^
@billf9526
3 жыл бұрын
Nice work! I especially like how you adhered the cap to the handle. To say that's not going anywhere is an understatement! One question... after carving in the channel details into the handle, what did you use to get the black in there? It looked almost like a wire saw, but I couldn't get a good look. Thanks for sharing your work! Makes you appreciate cutting a mortise/tenon joint in the old days before jigs and drill presses.
@ScrewsAndTools
3 жыл бұрын
Hello, thank you for your attention. I do this with an ordinary iron wire. During the friction, the wood speaks and leaves this black color.
@antonioraimundo8766
3 жыл бұрын
Muito bom ficou perfeito
@enveraydin2911
3 жыл бұрын
👍
@billypanda757
3 жыл бұрын
Fantastic work especially on that bolster of the handle. My only question is why is your Grindstone wobbling like that? Is it out of round?
@ScrewsAndTools
3 жыл бұрын
It needs to be adjusted, I sharpened a lot of things on it.
@6079226
3 жыл бұрын
Неужели ты начал классно реставрировать? Красавец. Тебе нужно студию сделать нормальную
@ScrewsAndTools
3 жыл бұрын
Ia staraus, ne vsegda konechno poluchaetsia idealno
@fahedq825
3 жыл бұрын
👍👍👍👍
@ussdiscovery6912
3 жыл бұрын
Maybe one day you could do a restoration on your Vise?
@ScrewsAndTools
3 жыл бұрын
Yes, I've been thinking about it for a long time.
@kloled2232
3 жыл бұрын
супер!
@ДенисС-т5п
3 жыл бұрын
я на таком станке подсвечник сделал еще очень давно)
@ScrewsAndTools
3 жыл бұрын
Ia poka uchus. Net rezcov normalnix, ceni dikie na nix.
@bigpete4227
3 жыл бұрын
I couldn’t quite work out where you were going with that at first. Turned out bloody lovely mate.
@igoryantor57
3 жыл бұрын
🔥
@BiayOrze
2 жыл бұрын
Pozdrawiam serdecznie in Christo
@ДимаКовальчук-с3о
3 жыл бұрын
Надо было ударную поверхность защитить,что бы не разбивало рукоятку. Дружище, какой клей используешь?
@ScrewsAndTools
3 жыл бұрын
Zdravstvuie, ia biu rezinovoi kiankoi. Klei dvux komponentni sensil
@CarsRestored
3 жыл бұрын
Me: No way he can restore this Screws And Tools: Hold my beer
@БорисБорисович-ы2л
3 жыл бұрын
Привет мастер сверху тоже надо было было поставить металлическое колечко чтоб не скололась рукоять когда лупишь молотком а там всё 👍👍👍
@ScrewsAndTools
3 жыл бұрын
Soglasen, xo po rokoiatke ia tolko bil i budu bil rezinovoi kiankoi. Nadeus proderjitsia)
@БорисБорисович-ы2л
3 жыл бұрын
@@ScrewsAndTools но всё равно деды и отцы так делали и вшколе нас так учили хоть резиновая хоть деревянная киянкой
@ScrewsAndTools
3 жыл бұрын
@@БорисБорисович-ы2л V sled raz obiazatelno dobavlu.
@tonywalker8030
3 жыл бұрын
You should get a pipe cutter .
@ВадимРудольфыч
3 жыл бұрын
Ай вэй, не жалко бить по такой рукоятке?! Почему с торца кольцо не впрессовал, это ведь долото, а не стамеска! А рукоятка знатная вышла, красота!👍
@ScrewsAndTools
3 жыл бұрын
Zdravstvuite, a ia bil rezinovoi kiankoi legonko.
@ВадимРудольфыч
3 жыл бұрын
@@ScrewsAndTools С нетерпением жду Ваших новых видео! Удачи Вам!
@ScrewsAndTools
3 жыл бұрын
@@ВадимРудольфыч Blagodaru vas! I vam uspexov!
@francisfruscalzo
6 ай бұрын
Before to use this millstone, you must to cut out the bundle with a diamond tool. That will be better.
Пікірлер: 153