What would the world do without craftsmen like you
@makmaxwell9389
3 жыл бұрын
Love the new wood handle. The grain of the wood comes out well.
@steveknight4291
3 жыл бұрын
That is one of the nicest chisels I have ever seen. Awesome job.
@billf9526
3 жыл бұрын
That is how you make a handle... excellent work! Thank you for posting this video.
@pauldockins9635
3 жыл бұрын
The chisel is beautiful in form and function
@paulorth2251
3 жыл бұрын
Very nice and practical restoration of this old tool. It looks great and functions well. Thanks for sharing this video with us.
@MuhammadDaudkhanTV100
3 жыл бұрын
Nice
@hotchow1000
3 жыл бұрын
Love the handle and the brass fitting!
@mred8002
3 жыл бұрын
I don’t know about others, but when I’m restoring or using my old tools, I often imagine the other hands that used them, and the tasks they were used for. Before criticizing my flights of fancy, it actually has helped to visualize the best design or use for components. The stories these old tools tell...
@j1bbs134
3 жыл бұрын
I do similar, I wonder who used them, and why they were left for me to find!
@karenerickson6078
3 жыл бұрын
Beautiful work! I love the light colored handle and the brass ferrule.
@PuppetMaster8707
3 жыл бұрын
You make such amazing handles from branches
@katrinamenio3230
2 жыл бұрын
Wow, that is a beauty, love everything about it.
@yeagerxp
3 жыл бұрын
Nicely done 👍👍👍Thanks for sharing
@potatie_huh
3 жыл бұрын
I absolutely love these videos. You make them so entertaining with your little comments, quips and of course the cat curtain! Please keep up the good work!!
@ScrewsAndTools
3 жыл бұрын
Thank you so much! ^_^
@benraya9405
3 жыл бұрын
Woooow, I came out pretty amazing. No need to be embarresed on the looks of your shop. Believe my word, is the humble jobs and that makes the better works. A pleassure to watch you adventures with the restorations. Ben Raya from South Baja California, México
@alantan6255
3 жыл бұрын
Nice job good as new layer and great video thanks you for sharing with us
@JAResto
3 жыл бұрын
Great job. The handle is outstanding. 👍👍
@diyresttube
3 жыл бұрын
thats a really nice outcome..cool handle love it.
@bohdangt6664
3 жыл бұрын
Nice chisel. Thank you for video and good luck you
@chadhwalker
3 жыл бұрын
Very nice work as always! The handle turned out perfect!
@annetteolivier721
3 жыл бұрын
Masterful. Wonder restoration
@j1bbs134
3 жыл бұрын
Nice work as always !
@chuckuu9294
3 жыл бұрын
You did it again brother nice work
@Keymagination
3 жыл бұрын
Simplest restorations are always the most beautiful.
@thisisrestoration1983
3 жыл бұрын
Nice restoration!Greetings from Germany
@lancemillward1912
3 жыл бұрын
A survival chisel...makes good fire making material for the camp fire ;)
@RESTORATIONOFSCRAPMETAL
3 жыл бұрын
this is a really cool restoration👍👍
@MrCrowski
3 жыл бұрын
Very nice restoration! Good job!
@oneshotme
3 жыл бұрын
Enjoyed your video and I gave it a Thumbs Up
@funnymoments6988
3 жыл бұрын
Amazing work! Your job is impressive 👍🔩
@experimentsvs4270
3 жыл бұрын
Beautiful job. Like 👍
@vinceianni4026
3 жыл бұрын
Hello mister screws beautiful restoration good job my friend
@ScrewsAndTools
3 жыл бұрын
Thank you so much!
@salaheddinelacigui5243
3 жыл бұрын
Good job brother
@susancarr9955
3 жыл бұрын
It's Groundhog Day!
@tctc8578
3 жыл бұрын
That’s one stylish chisel my friend, being an older steel probably much better quality than tools today. Great job 👍👍
@arnaufont1204
3 жыл бұрын
Great result, as always, but such a short video makes me want to see more. I love your content
@ScrewsAndTools
3 жыл бұрын
Thanks! ^_^
@douglasfathers4848
3 жыл бұрын
WoW what a beautiful restoration ,The handle looks spectacular mate . Keep up the grate work my friend . Cheers from Australia. :)
@rejmons1
3 жыл бұрын
You have got a lathe. Nice!
@mehmetsaithazar4046
3 жыл бұрын
Awesome!
@Адреналин-т7ы
3 жыл бұрын
Отличная стамеска получилась!Хорошая работа!Спасибо за видео!
@keith7754
3 жыл бұрын
sweet video!
@amazingrestoration677
3 жыл бұрын
Nice video man ! Keep it up ☺️
@alihaydar7366
3 жыл бұрын
Perfect! Greettings from Turkey
@storozhenkoplay5067
3 жыл бұрын
Отличные видео, желаю тебе миллион подписчиков 😉
@ScrewsAndTools
3 жыл бұрын
Bolshoe spasibo!
@GT_Racer347
3 жыл бұрын
Sweet 👍🏻 👍🏻
@iispjhanna
3 жыл бұрын
Very nicely done, the handle looks like it was made from a master carve. The bevel gauge on your wet stone grinder did a great job.
@LimaSoundProject
3 жыл бұрын
Perfect 👌
@IKEMENOsakaman
3 жыл бұрын
Really reminds me, one man's trash is another man's treasure
@zelehbi7957
3 жыл бұрын
Хороший инструмент получился!
@thomasthompson6799
3 жыл бұрын
Very nice restoration. Good metal and wood work. I like the lathe but suggest you build a table to get it off the floor. Could bowls and hollow ware be in your future? Very nice work as usual!
@couteaubateau3486
3 жыл бұрын
Goooood👏👏👏👍👍👍
@heathermacmillan962
3 жыл бұрын
Awesome...but you didn't have enough time to have your mug of tea 😁
@yegorvolhv
3 жыл бұрын
Ух, красотень! Браво!👏👍
@Moose-rq8gv
3 жыл бұрын
Sweet
@myworkshop6093
3 жыл бұрын
Noce work bro ❤️❤️❤️
@alexstars94er88
3 жыл бұрын
What a Very good Restoration of this chisel good job bro keep it up PS Your Alexander wist from germany. 👍🏻
@ScrewsAndTools
3 жыл бұрын
Thank you so much! ^_^
@ЕрёминаМастерская
2 жыл бұрын
Вполне себе рабочая стамеска Арефинского Завода, времен СССР,🤝👍
@renafra
3 жыл бұрын
Μπραβο ...πολυ καλη δουλεια...
@lv6419
3 жыл бұрын
Я ждал когда в конце видео вы нарежете стамеской колбасу и сделаете бутерброд с чаем)) Хорошая работа!
@jrvn94
3 жыл бұрын
Beautiful restoration! You don't have to apologize for the camera angles my friend, without trying new ones you can't know which ones work well :)
@ScrewsAndTools
3 жыл бұрын
Thank you so much! ^_^
@markneo1
3 жыл бұрын
Como sempre um trabalho primoroso. Notei que tem novos equipamentos. Parabéns 👏
@uwewill9366
3 жыл бұрын
Mit scheppach geht alles gut. Gruss Uwe
@WonderfulSkills
3 жыл бұрын
Good
@Александр-ххх-з3з
3 жыл бұрын
Отличная стамеска!!! Лайк жирный!!!
@rodger9948
3 жыл бұрын
Шикарно!
@AlexS-nw7td
3 жыл бұрын
Прогресс! Сравниваю с двухлетними записями.
@AdlerKnight
3 жыл бұрын
Очень круто) Но я добавила еще бы кольцо в начале рукояти, чтобы дерево точно не потрескалось. Стамеска как никак) И еще, попробуйте тонировку марганцовкой. На стакан воды 1-2 таблеки, настаиваете примерно смесь час и после тонируете) Любое почти дерево получит красивый красноватый оттенок, будто бы настоящее красное дерево)
@ScrewsAndTools
3 жыл бұрын
Bolshoe spasibo za vnimanie i sovet! ^_^
@khaledal-awadhi5000
3 жыл бұрын
😂😂😂😂😂 You do have a high expectations, messages are in bottles not in tools. My friend, no matter what your workshop is appear to others, if you are satisfied with it that is what matters. Out of this workshop an awesome jobs and ideas are preformed. 👍👍👍
@ScrewsAndTools
3 жыл бұрын
Thank you so much! ^_^
@ralphreinhardt6020
3 жыл бұрын
Very good job on restoration but video was too short.🙂🙂🙂
@ded-pihto
3 жыл бұрын
Лайк, коммент, просмотр, продвижение видео
@ШамильЮсупов-п7з
3 жыл бұрын
Хорошая, вполне рабочая стамеска получилась! 👍
@92656trw
3 жыл бұрын
To make the edge perfect, you have to make sure the back is absolutely flat.
@بسامبسام-ه6ث
3 жыл бұрын
GOO DVEERYGOOD👏👏🍀🌹🥀🍄🍀
@ВиталийЗахаров-п2ь
3 жыл бұрын
Класс👍
@TheTrueBobDole
7 ай бұрын
What would happen if you made a hollow handle and sealed a message inside🤔? How would you have reacted if it was an actual message?
@machvolksitius8205
3 жыл бұрын
Mr Screws and Tools, will you film and show your collection of restored tools and other stuff?
@ScrewsAndTools
3 жыл бұрын
Hello! Sure, here is video, my collection of restored stuff 2020 kzitem.info/news/bejne/mWNqqphmfX2TpJw
@machvolksitius8205
3 жыл бұрын
@@ScrewsAndTools my thanks) Next video collection on 31.12.2021 maybe =)
@ScrewsAndTools
3 жыл бұрын
@@machvolksitius8205 Sir, usually a sell my works and final stuff because I need found to continue my work. And I have couple ideas about "collection" for show my viewers. For example, some vintage and antique stuff, brass stuff and so on. Also, a lot of viewers are waiting my workshop tour. I hope you will enjoy this videos.
@farmboislife9624
3 жыл бұрын
I always wonder if it’s butter you put on the wood so do you?😂
@zebrafinchaviary6726
3 жыл бұрын
Kutlarım eline sağlık
@jacomoller5274
3 жыл бұрын
What is that yellow stuff you put on the handle? I've seen it in a few videos now and I'm curious because ite really makes the wood look amazing.
@ScrewsAndTools
3 жыл бұрын
It's a metal called brass. It is used in the handles of knives, chisels, and so on.
@jacomoller5274
3 жыл бұрын
@@ScrewsAndTools Thanks, but I actually meant that stuff in the Screws and tools bottle that you rubbed onto the wood.
@ScrewsAndTools
3 жыл бұрын
@@jacomoller5274 Oh sorry, now I understand what did you mean. it's handmade wax for wood finish. Here is my video tutorial how to make it. kzitem.info/news/bejne/lJihuIGLcWSCgoY
@rash64rus56
3 жыл бұрын
Еще нас переживет
@chriscraft9681
3 жыл бұрын
😉👍
@NURS98
3 жыл бұрын
Прям наточил как лезвие👍
@NAH1907
3 жыл бұрын
Hello, good video, what type oil do you keep to use after washing them again?
@ScrewsAndTools
3 жыл бұрын
Machine oil is best, but if you don't have it, you can use sunflower oil or olive oil or corn oil.
@NAH1907
3 жыл бұрын
@@ScrewsAndTools thank you
@ScrewsAndTools
3 жыл бұрын
@@NAH1907 Always welcome.
@robertgrell486
3 жыл бұрын
👍
@beatamaziarz1132
3 жыл бұрын
Viking axe
@ВасяИванов-т6т
3 жыл бұрын
У тебя по ходу машина времени стоит😂😂😂😂даже паркет елочкой уложен 👍👍👍👍рубрика мое совковое детство
@ScrewsAndTools
3 жыл бұрын
Spasibo za vnimanie, ia staraus ochen =)
@ryanbosak2944
3 жыл бұрын
Great job maybe 5 minutes next time.
@krotor34
3 жыл бұрын
👍🔨🔧👍
@КуртШвейгерт
3 жыл бұрын
Мастер - золотые руки!, как тебя звать?,из какой ты станы? и в какой стране ты сейчас живёшь?,неужели эти простые вопросы есть тайна великая?.
@ScrewsAndTools
3 жыл бұрын
Ia iz svoix, obiazatelno snimu pro eto rolik. Spasibo za vnimanie!
@КуртШвейгерт
3 жыл бұрын
@@ScrewsAndTools Думаю после ролика о себе,русскоязычных подписчиков у тебя станет больше!.
@ScrewsAndTools
3 жыл бұрын
@@КуртШвейгерт Blagodaru.
@stevedrake2031
3 жыл бұрын
What is the homemade wax? Can you share?
@ScrewsAndTools
3 жыл бұрын
Hello sir, sure here is my tutorial how to make it. kzitem.info/news/bejne/lJihuIGLcWSCgoY
@stevedrake2031
3 жыл бұрын
@@ScrewsAndTools thanks very much🤗
@ScrewsAndTools
3 жыл бұрын
@@stevedrake2031 Always welcome! ^_^
@sergo8787
3 жыл бұрын
Здорово! Наконец то перестал красить дерево краской для волос) натуральное дерево красивее!
@деняче-щ2ц
3 жыл бұрын
Ну это уже банально
@NURS98
3 жыл бұрын
Как на английском будет стамеска😂
@alexgall9005
2 жыл бұрын
загугли, что такое "алмазный карандаш". Ну выровняй круги на точиле, вид -прям кровь из глаз....
@dani_wotb7240
3 жыл бұрын
🦍
@uzoboy
3 жыл бұрын
Why don't you just show us before and after restoration. So you can continue cutting random stuff or cooking something. Man i don't wanna be mean I really really like your channel i watched all of your videos and liked them but lately you didn't show us anything. We all see just previews. 2 seconds filing then jump into sanding 2 seconds sanding and boom it's finish. Really? 4 mins video total. Whole 1 min is just cutting or chiseling stuff.
@ScrewsAndTools
3 жыл бұрын
Thank you for attention and critic. I guess the main problem in a time. Im trying to save time of viewers, for example 2-3 sec for part with sanding then changed position of camera and continue sanding or used files for example. I'm really appreciated for this comment, due to I really trying to improve my skills in video blogging and so on. Well, I will try to improve the quality of the shooting in this short\long way.
@uzoboy
3 жыл бұрын
@@ScrewsAndTools Thank you for your response. For me example, i really like watching and listening sanding and filing process/sounds. I don't really think people want to see shorts. Cos if i'im not wrong AJ restorations asked lately if people wanna see shorts or longer video. Longer won. Maybe you can do a poll and ask us longer videos or shorter videos. Again, I really like your job, you are a talented man and I would like to see your great jobs in a longer videos. Like 12-13 mins. In a 12 mins video you can have a time for cooking lol :)
@ScrewsAndTools
3 жыл бұрын
@@uzoboy Thank you so much for your advice and attention! This is very important to me. I'll do the survey right now.
Пікірлер: 131