You have a neat voice,your vocabulary is very good, explanes well, sense of humor makes your videos very pleasing to watch. Limited space and not to many tools you do an exelance job. Don’t stop.
@Lemongrasspicker
6 жыл бұрын
Thanks sir, I dislike my voice, but I'm stuck with it so I have to make do.
@carlcooper3525
6 жыл бұрын
Well you seem to be doing very good job with it.
@Lemongrasspicker
6 жыл бұрын
I appreciate that. Thank you for the vote of confidence
@MisterVikter
6 жыл бұрын
“No one ever complained about overkill” lol lovin the nuggets of wisdom in your vids as well as the projects completed!
@Lemongrasspicker
6 жыл бұрын
Thanks sir
@michaelveloso
6 жыл бұрын
Who is this wise man I keep hearing about!? Great job, been loving your videos. Its a good approach to doing projects, simple, and they don't need to be perfect.
@Lemongrasspicker
6 жыл бұрын
There are wise men all around. You just have to find them. Thanks for watching
@mc4kvb
6 жыл бұрын
Really a great restore. I love these old planes. Thanks for sharing!
@Lemongrasspicker
6 жыл бұрын
Becky's Texas Wood Shop thank you for watching Becky
@carlcooper3525
6 жыл бұрын
Lemongrasspicker alias third floor balcony woodworker. Well sounds good.
@Mikhandmaker
6 жыл бұрын
Well done man! Great old plane
@Lemongrasspicker
6 жыл бұрын
Mikhandmaker thanks sir, and thanks for watching
@JamesSmith-su3oz
6 жыл бұрын
A lot of work for a plane that is now yours. As with all your videos great job.
@Lemongrasspicker
6 жыл бұрын
Thanks sir
@jorgenlannock
6 жыл бұрын
looks like a real cool plane!
@Lemongrasspicker
6 жыл бұрын
Jörgen Börg tak skal du have Jorgen. Wait, you are Danish right?
@jorgenlannock
6 жыл бұрын
Lemongrasspicker nope, Belgian 😁. i'm a Dutchy. soo, only google translate will understand this sentence above mine hehe
@Lemongrasspicker
6 жыл бұрын
Jörgen Börg haha! My mistake then.
@jorgenlannock
6 жыл бұрын
Lemongrasspicker nah, must be my name wich looks pretty scandinavian 😋.
@Lemongrasspicker
6 жыл бұрын
Jörgen Börg yup, I had assumed that was the case.
@Lolmasaurus
6 жыл бұрын
Wow, that turned out great! Nice one. I think the insert was smart. should extend the life of that body
@Lemongrasspicker
6 жыл бұрын
thanks sir!
@carlcooper3525
6 жыл бұрын
Thanks for the help.
@TheWoodYogi
6 жыл бұрын
Great restoration :) Nice to know that it will be looked after and used well :) ॐ
@Lemongrasspicker
6 жыл бұрын
The Wood Yogi thanks sir
@adobeone6138
3 жыл бұрын
Did you know that this video was linked / shown on a japanese website? Well done sir!
@Lemongrasspicker
3 жыл бұрын
I did not but that's really cool! Thanks for telling me about that
@adobeone6138
3 жыл бұрын
@@Lemongrasspicker I cannot tell you which site, because youtube removed my earlier comment, in which a mentioned that site. This video inspired me to buy a sori kanna. Thank you. It has to come from Australia and I'll have to do some repair of the dai. So I will have to be patient for 'a while' before I can experience using it.
@deathwish_bigboss
2 жыл бұрын
Lol, I'm over here using a regular Kana when I apparently needed a Sori-kana for my shirasaya project but it turned out alright just had to cut out the curve with files & sanding paper
@Lemongrasspicker
11 ай бұрын
That works
@FFVoyager
6 жыл бұрын
My (Japanese) wife says she can't read it. She suggests 'It's more like a logo than a word' if that makes any sense.
@Lemongrasspicker
6 жыл бұрын
That makes sense. Likely just a makers mark. Thanks for looking that up. And thanks for watching
@SungkyuCho-cv9ps
Жыл бұрын
The Chinese characters seem to be 長幸(long happiness). The meaning of the letter may literally be Long Happiness or the name of the producer.
@Aubreykun
6 жыл бұрын
For the future you (or anyone reading this) could try to inlay metal to fix an old mouth instead of wood. Most antique chinese planes I have seen (and some premium new ones) have a strip of iron or brass at the front of the mouth. A hacksaw (for either) or a cold chisel with your vise's anvil (just for brass) would be all you need. Small pieces of steel and brass bar stock are at craft or some hardware stores.
@Lemongrasspicker
6 жыл бұрын
Aubreykun brass works for that. Easy enough to get. You just need to screw it into the sole. I wouldn't rely on glue for that kind of work. A mechanical connection is more reliable
@Aubreykun
6 жыл бұрын
+Lemongrasspicker I haven't seen any that were more than glued, unless they were somehow wedged into place.
@benbecker3842
5 жыл бұрын
Great video! Do you find most of your planes on e bay? The selection of japanese planes in the USA seem scarce, or if available they are pricey.
@Lemongrasspicker
5 жыл бұрын
This one was from ebay. But for a real plane you really should spend the extra and get a good one. Just because it's cheap doesn't mean it's good. These tools are still handmade in a highly traditional manner and thus they are costly but they are worth every penny.
@jameslucas6589
6 жыл бұрын
I notice the grain is 90 degrees to the plane body with the Dutchman. I usually see a triangular patch used along the grain to avoid the added friction and chip out. A wood with intertwined grain for the patch is excellent like elm or dogwood. What are your thoughts?
@Lemongrasspicker
6 жыл бұрын
As long as the patch does it's job then the wood type is really secondary. A sliding dovetail patch/fill is good for longevity.
@gregwinder181
Жыл бұрын
Hello.. I’ve just come across your video where you ask about what the writing (kanji) on the curved plane means .. My wife said it means something like, long life .. longevity.. I live in Japan and have a little collection of Old Japanese Kanna and chisels . I’ll be following your videos from now on .. Thank you..
@Lemongrasspicker
11 ай бұрын
I appreciate that and I appreciate you
@psychopathicfish97
6 жыл бұрын
Im just wondring why you would inlay that piece with the grain across? is that a good idea? and how much time did u use sharpening that blade? JESUS! Awesome vid! keep it up!
@Lemongrasspicker
6 жыл бұрын
You can inlay end grain. I just didn't have a piece big enough to pull that off. Thanks for watching, glad you enjoy the videos
@Lemongrasspicker
6 жыл бұрын
Total time sharpening was about 2 1/2 hours
@bonkant6584
6 жыл бұрын
That plane looks familiar... I bet you got it on eBay a couple weeks ago
@Lemongrasspicker
6 жыл бұрын
An astute observation. EBay is but the greatest antique store in the world.
@pomegranatepip2482
5 жыл бұрын
Have a look at the kanji for Tsunesaburo blacksmiths for that blade. Look on daikudojo.
@marwanstudio13
2 жыл бұрын
It really help me for name of the mark, thank you
@RobCardIV
3 жыл бұрын
sorry. but that dip in the CENTER will be guarded by the surrounding surfaces. those splits you put everywhere expedite the process of decay.
@Lemongrasspicker
3 жыл бұрын
Huh?
@carlcooper3525
6 жыл бұрын
I have three Japanese planes. Do not know how to get the iron in correctly. Could you help? Do you live in Texas? Any help would help. Thanks.
@Lemongrasspicker
6 жыл бұрын
There's actually a good walk through on how to set one up by a youtuber called sumokun. His stuff is very helpful.
@fd4294
6 жыл бұрын
Great job! Where do you buy your planes, please?
@Lemongrasspicker
6 жыл бұрын
Anywhere I can find them. eBay, antique malls, etc... just have to keep an eye out. It's easier to buy them from dealers though
@ga5743
6 жыл бұрын
Nice job...could you tell us what you say in Japanese at the end of your videos. Thanks
@Lemongrasspicker
6 жыл бұрын
"Thank you, goodbye" thanks for watching
@aguiacutelariasa9685
2 жыл бұрын
hellow Brasil
@jorgecinelli6706
4 жыл бұрын
Que pocas ganas de hacer un trabajo y asì tambièn saliò.Mejor me borro,aca no se puede aprender a trabajar bien.
Пікірлер: 63