Completely agree with the rev trigger. I didn't even realize there was a switch in there at first untilI saw it because I didn't push the trigger in far enough to hear the click. lol
@FoamBlast
6 жыл бұрын
Can't wait to see what you do with it. :)
@markmasaki1480
6 жыл бұрын
Once you finish with your Dominator build, I would love to see the new effective range that you can squeeze out of the Elite dart (the real limiting component beyond the money Worker makes off of the flywheel kits and cages).
@sadboisonly1004
6 жыл бұрын
I would run a simple performance setup in the Dominator for like superstock wars and things like that. I'd have Valkyries as the first motors then Neo Rhinos in the second stage cuz they have a slight bit more torque and lower stall current than the Kraken motors. I'd replace the included gearbox with the metal one you mentioned and put a normal Rhino motor in there. Body wise, I'd probably find a way to wrap a Centurion shell around it and store a good sized lipo in the back and paint it.
@Bobololo
6 жыл бұрын
No real point in getting one if you want superstock performance. You can get that with one flywheel cage.
@Gigharborbigfoot
6 жыл бұрын
FYI most every m4 airsoft stock fits large batteries
@beerenmusli8220
5 жыл бұрын
Awesome Video!!!!
@Burasta
4 жыл бұрын
Can I ask a question? Is the battery tray wired and sized for AA?
@bofftac2882
6 жыл бұрын
Looked up the FET on teh Googlez... It's an 86A 20V package. Compare the IRLB3034 which is package limited to 195A 20V we typically use for high power applications here in the UK. The LR8726 in this is barely going to be enough for the Revamped motors you mentioned as the final stage, let alone the other pairs of motors. :/
@ssavman
6 жыл бұрын
You're doing god's work friend
@harrisontashjian752
5 жыл бұрын
Hey bobo would the new metal worker wheels be good in a 42 mil ofp cage and krakens in a stryfe, also do you think 850 mah is enough capacity for that
@Bobololo
5 жыл бұрын
No. An 850 mAh battery might have the C rating for it, but that won;t last you long at all.
@doomlord7331
6 жыл бұрын
Hi bro do you know if the red Artifact cage will fit? Got one laying around.
@Bobololo
6 жыл бұрын
It should work. Not 100% sure, but I think it would.
@AndrewAitchison100
6 жыл бұрын
Is the pusher the original shape or has the face been changed?
@tv-pp
6 жыл бұрын
Where did you get the metal full auto kit?
@Bobololo
6 жыл бұрын
Adafruit
@valerielastname9508
6 жыл бұрын
www.adafruit.com/product/3802 Maybe?
@TheExactlyatmidnight
6 жыл бұрын
this the right one? www.adafruit.com/product/3801?gclid=CjwKCAiA5qTfBRAoEiwAwQy-6Vb0b_-YB7RzdHtIG8jUmOio9lA6LXvZwyXOXelHGgn4JT_dqap_5RoCwoAQAvD_BwE
@Natethegamer07-p5w
6 жыл бұрын
I wish i had it
@darcyc9311
6 жыл бұрын
I'm looking forward to seeing some fps readings so I can make an informed purchase decision
@giovannirocket9954
6 жыл бұрын
As someone who casually follows modding, 3 flywheel cages? That seems really excessive to me. What's the advantage of having 3 cages?
@Bobololo
6 жыл бұрын
Higher FPS. Instead of one cage taking the full force of the dart, you can ramp up the speed using multiple cages. Usually the last cage has higher RPM motors, so the dart starts like normal, gets a little faster from the 2nd set, and then is able to use more of the last motor's RPM than it would in one stage.
@giovannirocket9954
6 жыл бұрын
Ah, that makes sense.
@BigDaddy_2K
6 жыл бұрын
Time for someone to build a Clear Lipo Stock for this thing.
@Bobololo
6 жыл бұрын
Best I have at the moment is a clear Worker stock with polycarb using clear epoxy. Probably won't look too great though :\
@EpicWail
6 жыл бұрын
4 stage brushless :)
@sadboisonly1004
6 жыл бұрын
Holy jesus christ we'd be reaching HPA type FPS easily with that kind of setup 😂😂
@ALPHA.Mods.1
5 жыл бұрын
*too big lipo* this is why I use springers
@TheSybermedic
6 жыл бұрын
As always a nice video, keep up the great work. Silver Fox Industries over on Etsy just released an OFP cage for the Dominator, yes it has a wider opening for the double stack magazine and is available in openings between 43.5mm to 41.5mm.
@TheNerfModdingNerd
6 жыл бұрын
Too Blue???
@bribair1278
6 жыл бұрын
I didn't realize you still uploaded KZitem stopped notifying me.
@StuckOnAFireHydrant
6 жыл бұрын
I'll take those worker motors off your hands 😉 I need some extras
@ElNeroDiablo
6 жыл бұрын
Hrm... I'd be tempted to buy a Dominator and wire up 3 different looms that can be plug-n-play with XT60 connectors: single-stage cage & loom for low-FPS games (say
@JayNerf
5 жыл бұрын
gudmonin boboooooo, I miss your sexy voice.
@Korviliath
6 жыл бұрын
Did Mr. Nathan do your soundtrack for this video?
@Daniel_B79
6 жыл бұрын
We've seen this enough. Show us an interesting build or something but don't give us more unboxings or impressions without using it. You don't know anything until you use it.
@Will-js7cu
6 жыл бұрын
I do know some things about it right off the bat based on experience. Part of this was to use my concerns for when it is built to see if anything was right or wrong. It's also a way to give another opinion on the kit- which is always nice to have. You'll get interesting builds when you get them
@RoryStarr
6 жыл бұрын
@@Will-js7cu I think the commenter could give you a bit more chill, but I will add that everyone but out of darts did 15 minute impression videos on the shell. I think we are all hoping to see an afterburner build and play tests with the new mag. I suspect they're coming. I just think we are a notoriously impatient community.
@bigbrassballs
6 жыл бұрын
Bobo lolo IMPOSTER!!!!
@Bobololo
6 жыл бұрын
@bigbrassballs That's my g+ account? Replied to it from the KZitem Studio app, so idk what happened lol
@Bobololo
6 жыл бұрын
@Rory Stevens I think you should expect first impression from everyone who gets it. I have to put this together and have to wait on some supplies first :\
Пікірлер: 45