The maximum power for sure. I need to set it to about 44-47% to get about 25-27 km/h top speed (as some sort of software speed limit) The issue by doing it this way... it loses nearly all its acceleration and torque for uphill, rendering the scooter useless.
@pripiselisabeta1973
Жыл бұрын
Is there any phone app for the vsett 8 plus?thanks
@TrevorChristie-gw4wn
4 ай бұрын
Hi there was wondering if you could help wondering what setting I should go to so I no if battery dieing
@shadowmoon5445
2 жыл бұрын
Lmao a friend put there vsett setting acceleration p setting to edit 5. They're noobs and accident put there pinky finger on the throttle end, the vsett spun around into a helicopter and went through a shop window on its own🤦♂️
@scottbigley5126
3 жыл бұрын
Thanks for making these about the Vsett line, I own a 10+ for a few months now and didn’t know about the settings you showed! Real crap that the UK has such restrictions for PEV’s! Overe here in the states I only get cops admiring even asking me about it! There’s no helmet law in Michigan where I am but I always wear my gear as if you don’t own a Vsett, especially the more powerful ones you can get in a bad way quick so all be safe! And cheers to you for great videos, keep it up!
@escootermodificationguides2149
3 жыл бұрын
Your welcome Scott thanks for your support. I do love the Vsett 10 its just so capable which for me is needed as i cant legally ride it on public roads. I always envious of all vids i see of these being ridden in some stunning locations around the globe.
@MrExprise
2 жыл бұрын
If the speed limiter if removed is there a way I can apply a limit in the P settings? Can the 'gears' be changed?
@cluaxa1712
2 жыл бұрын
Can’t remember which ones but there is a power one that goes 0-100
@MrExprise
2 жыл бұрын
@@cluaxa1712 yes found it! Thanks. By trial and error I managed to limit it so one gear matches my city's limits
@HelloMyFriend_
9 ай бұрын
@@MrExprise And the other gears don't match your city's limits? Doesn't the law state that the scooter can't have the ability to go over the stated limit? I ask because we are only allowed 20 kph here in Denmark, and I don't want my scooter impounded. Can you set the maximum speed to 20 kph in P settings?
@Televisiontechnology
2 жыл бұрын
On the Vsett 10+ I also found when driving off-road or gravel, that got more traction in single motor mode and P12 throttle response best in the middle, otherwise can slide about a bit.
@markhouck5258
2 жыл бұрын
Thanks For Sharing If Only More VSETT Owners Would Stop Being Shy and Share Their VSETT WISDOM 🤪 Thx Again! ..... OG - Gone Electric ..... "OGGE"
@SuperTorres76
2 жыл бұрын
Can you tell me how to turn the headlight on I've followed instructions but it hasn't worked. Cheers
@pacochawa2746
2 жыл бұрын
I think its hold down + for 3 sec. If not its the - for sure. Do same to negate.
@Mike_Malloy
2 жыл бұрын
Thanks for the tips. The audio was a bit muffled on my end so hard to understand.
@MrMasterDebate
2 жыл бұрын
How do I change it to miles per hour
@escootermodificationguides2149
2 жыл бұрын
P settings number 2, alternates between MPH and KPH
@luckyluciano4075
2 жыл бұрын
Thanks for the question you asked cause this is exactly why I can't to this channel! 👍👍
@Whereisgio
Жыл бұрын
I got a vsett display for my zero 9 what settings should I put to match my zero 9?
@Airbornealltheway88
Жыл бұрын
Thanks. I read the manual but wasn’t understanding some of the stuff.
@infinit280
Жыл бұрын
On vsett8 p15 at what should IT be kept
@happyhusband312
2 жыл бұрын
how to turn the lights on automatically each time.. that's the question:/ firmware update?
@ViktorHristovvv
2 жыл бұрын
Very useful, thanks!
@borisevraev8190
2 жыл бұрын
Hi, i have a question in some e-bikes or scooters order to change p settings you need to enter a password first where is this password is stored ? in the display throttle or inside the controller i mean if i have my p-settings locked and i will replace the display (qs-s4) will it help or the password stored inside the controller TIA
@camj256
2 жыл бұрын
Anyone have their controller forget the p settings all the time? Its like it gets scrambled sometimes. vsett10+ here.
@sambo7015
2 жыл бұрын
I can not unlock the on-board computer after nfc settings. What to do?
@rogelbyrondelapena3624
2 жыл бұрын
Sir question, E10 lcd not turning on, lights are working. How to fix it sir?
@papotaino1516
2 жыл бұрын
Just got my Vsett 10+ today big help thanks
@fabianc1650
3 жыл бұрын
Hi Alan.. hope you are well? Please and what about the P15? I don’t understand it’s usefulness ? 😉 thank you
@escootermodificationguides2149
3 жыл бұрын
P15 is to do with th voltage the controller shut down. mine are set at 50v
@fabianc1650
3 жыл бұрын
Good evening Alan . That is exactly what I understood. But Mine are set at 52v however my scoot still work and contrôler Still work under 52v Thank
@fabianc1650
3 жыл бұрын
Sorry for my bad English .. it is very difficult for me to explain it with the right words
@mohyedineelbakkali9042
2 жыл бұрын
@@fabianc1650 just use translate
@fabianc1650
3 жыл бұрын
Good job Alan.. instructive !😉👍
@escootermodificationguides2149
3 жыл бұрын
Thanks 👍 buddy, think i done this one to remind me also as i'm always forgetting when i'm out and about 😂
@fabianc1650
3 жыл бұрын
😂👍
@wilierlizard5249
2 жыл бұрын
i just want you to say the phrase "if you buy one, you get three free"
@keronfarrier2198
2 жыл бұрын
Electronic braking is garbage....fractured damn wrist trying to brake quickly on my sidewalk smdh lol anywho it's turned of now
@happyhusband312
2 жыл бұрын
so it works then:D
@milordas
2 жыл бұрын
For VSETT 10+ P07 should be 30 and P06 should be 9,6. OR P07 should be 32, then measurement would be correct
@stephenhartley3292
2 жыл бұрын
For VSETT 10+ I have left P07 on default which manual has at 28 and I have changed wheel diameter P06 to 8.8 to get accurate speed displayed, checked with GPS.
@escootermodificationguides2149
2 жыл бұрын
What setting are you running KPH or MPH, just interested to know.
@stephenhartley3292
2 жыл бұрын
@@escootermodificationguides2149 I'm running KPH and my top speed has been about 70Kph = 43Mph measured with gps on phone
@milordas
2 жыл бұрын
@@stephenhartley3292 that could work too, but in real theres 30 magnets in the motor, as i heard from whos counted them. Setting wheel diameter to 8.8, could cause in odo range misscalculation, need to test for it
@abundantharmony
2 жыл бұрын
@@stephenhartley3292 why did you change your wheel diameter to that?
@presentpakistan5195
2 жыл бұрын
tanks 👌
@650_ollie
2 жыл бұрын
I got the vsett 8 how do I make it to mph it's on kph
@kyusan1974
2 жыл бұрын
Hola, lo modificas en P02.
@JustBlondie
2 жыл бұрын
What are the other ‘P numbers’ for?
@fartthecat
Жыл бұрын
I guess programm
@thechannelofrandomness6814
2 жыл бұрын
Question why does your nfc reader says 58? Is that the battery or what?
@EricMurilloProductions
2 жыл бұрын
That’s your voltage
@thechannelofrandomness6814
2 жыл бұрын
@@EricMurilloProductions thank you.
@takeshka0019
2 жыл бұрын
How off cruise control ?
@pacochawa2746
2 жыл бұрын
P17 turn to 0. Cruise control is a menace. Was letting go of gas in a turn then it keeps going...
@rogergutierrez4967
2 жыл бұрын
Hello Question : How I can delete miles, to cero?
@escootermodificationguides2149
2 жыл бұрын
I dont think you can
@stephenhartley3292
2 жыл бұрын
P16 ODO Zero setting: keep pressing + for 5 seconds, but I don't know why you would use this.
@pntbllfun
Жыл бұрын
To try to mislead someone when selling the scooter? Shame
@julioenriquevargasdelahoz3530
Жыл бұрын
No hay algún truco para más velocidad de la vsett 8?
Пікірлер: 62