P1 screen brightness P2 Mile to kilometer P3 voltage P4 Amount of min until scooter turn off P5 unused P6 wheel diameter P7 magnet in motor P8 Power limit P9 kick start 1 on 0 off P10 unused P11 regen brake P12 Acceleration P13 unsused P14 unused P15 volts until scooter turn off P16 reset miles P17 cruise control P18 bind unbind nfc card P19 unused P20 unused
@DARK_AMBIGUOUS
Жыл бұрын
What happens if you change the unused codes?
@jinjinpyo28
2 жыл бұрын
Your're a savior!! Vsett 8 owner here.
@lavarball7538
2 жыл бұрын
Vsett 8+?
@ForcingShots
2 жыл бұрын
Whats your settings looking like?
@Nicolas-uu3jr
11 ай бұрын
hey dude, me too😀, can you tell me if you've ridden it in wet conditions(not rain but wet tarmac), and how does it hold up?
@orianaibrakovic9153
Жыл бұрын
Danke fur diesen super vortrag hat mir sehr geholfen
@bambooplushproductions6339
2 ай бұрын
Thanks man I appreciate this!
@Zurl6321
2 жыл бұрын
Thank you for this video:) I am getting the vsett 8! liked and subsribed
@GiRides
2 жыл бұрын
Thank you❤️❤️
@mariusandrei4568
2 жыл бұрын
I have a vsett 8 and i am telling you , is best thing you could have . I rode it to work for abot 3 months . Now is in storage due to cold weather
@GiRides
2 жыл бұрын
@@mariusandrei4568 It has great built quality just acceleration could be a little better, I like zero9 a lot more
@Nicolas-uu3jr
11 ай бұрын
@mariusandrei4568 so no drive at all during wet conditions?
@jaken528
2 жыл бұрын
Thank you man!
@k9teamzagrebskolazapse149
Жыл бұрын
Thanks you help mee alott.
@scottg429
8 ай бұрын
THIS is exactly the video I needed. Thank you! I have the 2023 vsett 10 + but the settings seem to be identical. I just don’t know why the unused settings are there in the first place
@GiRides
8 ай бұрын
Glad it worked out for you!
@scottg429
8 ай бұрын
@@GiRideswhat exactly is the purpose of regen braking? I turned that off because I felt it braked too hard and fast and was afraid of going over the bars
@GiRides
8 ай бұрын
Keep if OFF, already replaced one controller using regen. People using it to save brake pads and getting a couple % back to the battery. Just don’t use it if you have vsett 10+
@scottg429
8 ай бұрын
@@GiRidesso it overheated the controller?
@GiRides
8 ай бұрын
@@scottg429 yes
@markb3787
2 жыл бұрын
very helpful, thankyou
@sohaibmahagri5037
2 жыл бұрын
Cruise control is causing me problems on my first day thank you worth the wait till the end
@nassiratti8542
2 жыл бұрын
Go to P17 and change the value from 1 to 0
@bacopaolo1
2 жыл бұрын
how cruise control works?
@itwasntmebro2669
2 жыл бұрын
@@bacopaolo1 you have to hold the finger throttle at the same pressure and maintain the speed you want for 8-15 seconds, then let off and it should kick in. if not, you didn't wait long enough. (make sure you stay at same pace for 8-15 seconds). Tapping the brakes will disengage the cruise control, as well has hitting the throttle.
@crypttion808
Жыл бұрын
👍 Thank you very much!
@jodo7666
24 күн бұрын
Thanks for this video 👍💯
@GiRides
24 күн бұрын
You are welcome
@Satchafunkilus
Жыл бұрын
thanks man!
@pcenterprise07
2 жыл бұрын
Hello. I am thinking of upgrading my Vsett 9 Plus battery to a 52v ,like the Vesett 9.By doing so, I will also change my P Setting to 52. Do you think Vsett 9 Plus might get more mileage? Thank you so much for this video. Very helpful!
@GiRides
2 жыл бұрын
I can’t answer to this question but i think you need bigger ah battery which gives you more range because Voltage only gives you more power
@DinggaTV
2 ай бұрын
What do you think is the problem is the "on" button is hard to press but it's clicking?
@laktix
2 жыл бұрын
The odometer can be clocked just with holding one button? That seems crazy
@borisevraev8190
2 жыл бұрын
Hi, i have a question in some e-bikes or scooters order to change p settings you need to enter a password first where is this password is stored ? in the display throttle or inside the controller i mean if i have my p-settings locked and i will replace the display (qs-s4) will it help or the password stored inside the controller TIA
@GiRides
2 жыл бұрын
Try 1500
@shpkd8580
2 жыл бұрын
Hello! i wanted to ask for your opinion! i am getting in future Vsett 10+ but mine will come with limited speed max 25 kmh i am planning to cut the white cable, but is it ok if i manipulate with P8 in case i want to bring it on 25 kmh lets say if i lower from P8-100 to P8-21 then will make it 25 kmh i saw one vid in KZitem the same did and it worked, my question is for a man who has about 96 kg would it work if i go uphill exact 25kmh or will move like turtle :) i would like if you try and test uphill this with your scoter and let me know. Thanks.
@GiRides
2 жыл бұрын
I would like to test it for you but we have 1 foot snow outside right now:) When it heats up a little I will do this test for sure!
@Jcool721
2 жыл бұрын
Please don't cut. There are connectors inside the deck.
@user-jk7lu6rf7h
2 жыл бұрын
Thanks
@andrewwhite1065
Ай бұрын
67.2 volts maximum charge on my Vsett 10+ when it's rated at 60v.... ? Strange but i get extra mileage out of the higher charge. Is this normal for all scooters?
@GiRides
Ай бұрын
Yes, this how it must to be 67.2 is 100% charged 60v battery
@user-mn2zs2tb3c
5 ай бұрын
Hey great video it worked for me on my vsett 8 Boss Scooter bro getting 26 mph on it full out can I get more out of it.? 🙄 Please let me know keep the grate work bro
@GiRides
5 ай бұрын
No, you can’t get more out of vsett 8
@user-mn2zs2tb3c
5 ай бұрын
@@GiRides thanks for coming back I'm happy 😊
@aptioskanov5762
3 ай бұрын
Why my vsett 10 doesnt go below 58 voltage even with full charge ( green light)?
@DARK_AMBIGUOUS
Жыл бұрын
What happens if you change the unused P Codes? Also the Manuel says that P20 is not unused but it’s actually the “Communication Protocol” and that it is set to 4 and cannot change. What does this mean? What happened if you change P20? Will it break my scooter? They should have just hid all of the unused codes and P20 and all of the ones that shouldn’t be changed like the wheel diameter, magnets number, and the voltage level since those are specific to each scooter and should not be changed, also there should be a better screen that is able to explain what each setting means in case you don’t have the Manuel. I know I could just design the perfect electric scooter that would be easy to understand. If you paying $1,000-$4,000 for a scooter, it should have a real screen and not a calculator screen to be honest. Like think about what are we supposed to do if you Manuel gets lost like mine almost did???
@AndREDraut
Жыл бұрын
good explanation, it's tedious to read the manual, not all too well translated it is.
@DARK_AMBIGUOUS
Жыл бұрын
It’s translated really bad but not as bad as the manual for this hoverboard that I used to have
@Realpiolex
2 жыл бұрын
Do you know how do I flash the front lights in VSETT 9+ Scooter?
@immzeek
Жыл бұрын
Not sure if you can, could be wrong.
@immzeek
Жыл бұрын
I'm trying to find out what the cut off voltage should be for vsett 9+ if any knows??
@hamzalayouni574
Жыл бұрын
Hi Please help me, the tail lights are still on, romobil don't want to start, what is the problem?
@pillzbeatz1037
Жыл бұрын
Guys, my LCD screen broke. Can anyone tell me what the default voltage setting the LCD screen comes with? And whats the highest it goes to? So i can set it without looking at the LCD. Thanks
@user-iy2ez5op7c
Жыл бұрын
how can i find charging indicator vsett 10+
@k9teamzagrebskolazapse149
Жыл бұрын
I yust broke code and my Scooter when I turn him on he yust opens upp and I must reset all and all 3 cards put od rsd holder:)) . Only I ride VSETT8 and it had 48V battery so I haw put 48 where yours is 60V and magnets doo I also put 30 number off magnets and only one thing you set yours too 100km/h mine goes 45 so mu I leave it there or not. Sory for long message. But those tings I'm not 100%shure
@user-co2fv3jv1q
6 ай бұрын
but my p settings is upto 9 only is it different?
@jaaz77
2 жыл бұрын
How did you get the number of magnets for setting P07? Is it the same for all Vsett models?
@GiRides
2 жыл бұрын
I believe that 10 and 11 has 30 magnets but 8 and 9 has 28 magnets, correct me if I am wrong
@DARK_AMBIGUOUS
Жыл бұрын
The Manuel says that the default is 28, set it to 28 if you don’t know what it should be on
@Nikola23888
Жыл бұрын
how can it be adjusted when starting the scooter to be in 3 gear
@GiRides
Жыл бұрын
There is no way to do that
@Nikola23888
Жыл бұрын
@@GiRides thank you very much for your reply❤️
@johndelfajardo977
2 жыл бұрын
May I know how to remove the exclamation mark on my screen? It always show even I don’t touch anything
@GiRides
2 жыл бұрын
Yes, just snap the brake levers and after that you have to losen the brake sensor screw, very easy fix
@DARK_AMBIGUOUS
Жыл бұрын
That means there is an error. It probably means the breaks are always being pulled so hey need to be loosened some or maybe tightened, try both by twisting the screw by where the break cable ends next to both wheels
@Itzzconner
Жыл бұрын
Can you reset your miles more than once as I’m having trouble doing it
@williaminnes1563
Жыл бұрын
Is all of this listed in a book?
@GiRides
Жыл бұрын
I don’t have a book so not sure about it
@DARK_AMBIGUOUS
Жыл бұрын
Yes, it’s in page 18 of the Manuel that came with my Vsett 8+
@vexl9078
Ай бұрын
why it doesnt show p8?
@sambo7015
Жыл бұрын
I can not unlock the on-board computer after nfc settings. What to do?
@DARK_AMBIGUOUS
Жыл бұрын
Please explain what you mean? I’ll help
@DrWonderEyes
2 жыл бұрын
I'm going to try the settings on the wheel. it reads 4 mph too fast. based off of GPS
@GiRides
2 жыл бұрын
It will correct speed if you use my settings on vsett 10
@DrWonderEyes
2 жыл бұрын
@@GiRides after I made the changes, it now reads correct. with the stock settings you would believe to hit 50 mph on sport mode.
@GiRides
2 жыл бұрын
@@DrWonderEyes Yes, they made it very inaccurate from the factory. And they lied saying that it goes 50 MPH even though it doesn’t.
@tomzi9526
2 жыл бұрын
Does the same apply for vsett 11+ ? Im getting mine tomorrow.. and also what app do u use for gps readings? Thanks
@GiRides
2 жыл бұрын
@@tomzi9526 yes the same except tire size, the app i use for gps speed called "Speedometer" on ios
@PyrexTV
2 жыл бұрын
tip - dont mess with the wheel dimensions regardless if you think its making your scooter faster it honestly doesnt good vid tho mate
@GiRides
2 жыл бұрын
It makes mph readings more accurate:)
@TheRealElectricOutdoors
2 жыл бұрын
yeah the v10 comes showing FASTER from the factory, he slowed it down...
@myk2139
11 ай бұрын
In your psettings bro,, its worth it? 4days ago i got my scooter vsett10+
@GiRides
11 ай бұрын
Great scooter, how do you like it?
@myk2139
11 ай бұрын
@@GiRides its cool bro thnkyou,, by the way about the psettings that you are using rightnow is that recommended ? Hehe i only hsve vsett10+ 20.8 ah thats the available here on ny location
@GiRides
11 ай бұрын
@@myk2139 yes what i use in the video i can recommend for 10+
@myk2139
11 ай бұрын
@@GiRides ohh tnx for helping me on this Psettings.i hope it will work till my vsett10+ getting old. Hahahah ✌️
@myk2139
10 ай бұрын
@@GiRides hi bro,, on this Psettings how many years you are using this and until now your vsett10+ never got issue til now and it still powerful?
@user-iy2ez5op7c
4 ай бұрын
How to fix when error and my hub not working too
@GiRides
4 ай бұрын
You just have to google for error codes and go from there
@user-iy2ez5op7c
4 ай бұрын
@@GiRides thank you error code is 00 and 09 im worry about 09 its controller 😔😢
@aptioskanov5762
3 ай бұрын
What is kickstart and whats the point to have it?
@GiRides
3 ай бұрын
Safety, kick before you start riding
@aptioskanov5762
3 ай бұрын
Is it also safe for the engine and battery?
@GiRides
3 ай бұрын
@@aptioskanov5762 yes, uses less battery
@aptioskanov5762
3 ай бұрын
Last question. How do I see how much electrisity i have left in my battery by numbers?
@GiRides
3 ай бұрын
@@aptioskanov5762 just read volts on the display, and google for volts/% chart
@infinit280
Жыл бұрын
How many magnest vsett 8 has?
@GiRides
Жыл бұрын
I guess 28 but not sure
@infinit280
Жыл бұрын
@@GiRideswow Man ,u'r name should be flash
@infinit280
Жыл бұрын
@@GiRidesanother question ,what cells the battery have?
@GiRides
Жыл бұрын
@@infinit280 lowest capacity battery has generic china cells, the other 2 higher battery options has LG cells
@infinit280
Жыл бұрын
@@GiRidesnd another (i just find y the perfect person to ask) on a little sticker on vsett 8 i think it says that u should fully charge the scooter before the first use is there a problem If i didn't?*
@hamzalayouni574
Жыл бұрын
Hi please that four vestt8 olso
@GiRides
Жыл бұрын
Yes
@hamzalayouni574
Жыл бұрын
@Gi Rides thank you please i pay vsett8 and if you can tel me how I repre settings I prepr that , p3, 36 and p6,90,and p7,28, and p5 , 290 if that good or not please tel me thank you very much
@GiRides
Жыл бұрын
@@hamzalayouni574 P3-48, P5-000
@mrfluffpanda
2 жыл бұрын
My scooter is stuck at going 15 mph when I want to go 20+ any ideas?
@GiRides
2 жыл бұрын
Change gear maybe from 1 to 2 or to 3 :)
@mrfluffpanda
2 жыл бұрын
@@GiRides unfortunately gear 3 is 15 mph
@milordas
2 жыл бұрын
cut/unplug white cable under deck
@itwasntmebro2669
2 жыл бұрын
@@milordas on the wire harness, look for white wire. cut and separate (its a looped wire)
@independentmind6345
Жыл бұрын
Yeah it may have a speed limiter connected under the hood, look up speed limiter removal on KZitem.
@Butros1
Жыл бұрын
I lost alot of acceleration power
@GiRides
Жыл бұрын
Why? How?
@Butros1
Жыл бұрын
@@GiRides my vsett 10 plus barely has the speed now , idk
Пікірлер: 136