After having 2 sets of these installed in my trailer and used them multiple times now, I would recommend 2 changes. First, do not use the mounting hardware that comes with them. They are cheap and strip out easily! Secondly, take the safety pins to your grinder and grind the end into a point to help the pin find the hole easier. Other than that, they work as advertised.
@sonnyhoffman9027
5 жыл бұрын
I use the Lock and Load every weekend. I have come to Realize that when the Bikes are on the trailer traveling. The Bumps from driving can be Aggressive. I can’t believe how many times I missed a bump or hole and I look back and the bikes are dang near 35* degrees. And the lock and load holds them in. Shoot man. They can take a beating. But sometimes I slow the bounce down with 2 sway straps. Dang I hate watching my boys get all sideways back there. Ha lol. Cheers. Now I want to Race.
@ian9toes
4 жыл бұрын
If the wheels were in tracks would that solve that issue?
@vinuezaer
6 жыл бұрын
Great . I've had 2 for 5 years. Great for 4 strokes. 2 stroke pipe is a bit harder to pass thru .
@PatchedBandit
Жыл бұрын
Confused about whats the difference in the van mounts?
@Tommy.y2k
6 жыл бұрын
Do a review on the new version
@ShercoCouple
3 жыл бұрын
Amazing system. We have Sherco SER 300 and Sherco TY 125. Do you think this one will be too big for TY?
@blazindubey1721
6 жыл бұрын
Hell yea Rocky Mountain that's really cool I ride a 2016 kx450 I lost my bike all the time I'll look into it
@noControl556
6 жыл бұрын
Would be good to see some reviews on detachable front wheel chock options as well. These look good but I also want the option to put my street bike in the trailer some times too
@FullXThrottle
5 ай бұрын
Will this work for the crf125f big wheel?
@joy4811
Жыл бұрын
Hey, how much pressure do i need to press down the gripper? I cant use my food in the Caravan.
@masonlaurent8351
6 жыл бұрын
its very cheaply made the red knobs break off and it ends up being a two person job one to sit on the bike and push down the locks and one to put the pins in
@gary8653
3 жыл бұрын
Agreed, they are made on the cheap. They should have had them made in America and charged a few more bucks for them!
@MooHooHaw
6 жыл бұрын
I'd love to see it more adjustable, especially for width so that I could accommodate any guest bikes that might show up. Also hard to believe that it doesn't come with flush mount bolts. You have a flat strap on the floor but big bolt heads waiting to trip you. A simple change but one that should have been included. During that odd pause when you said "attach your nuts" :) the washers shown were awful small for the task of retaining a 200+lb bike. All in, a good idea but seems a but light on execution.
@ponydown418
5 жыл бұрын
Check out the pro model. It's a lot nicer.
@markwilson8811
6 жыл бұрын
I'd Like to see an extreme brake test or a light rear end accident. I doubt that it would have a good result.
@codprocamp4690
5 жыл бұрын
Tie downs are probably worse in an accident
@dogdog1960
5 жыл бұрын
How far apart the mounting screw holes that go into the trailer? 16" on center?
@TonyTsai
Жыл бұрын
Can this work on sport bike, like a modern 1000cc width size configuration
@rmatvmc
Жыл бұрын
Unfortunately, this designed specifically for dirt bikes and will not work for a sport bike.
@TonyTsai
Жыл бұрын
@@rmatvmcMC thanks for your speedy response, I've been trying to find alternatives other than pitbull products, due to the length of the bed. if any new product may be similar, please do suggest a link, i am very interested to fit both my Supermoto and superbike in the same way. the bed is 5.5 ft long
@pawlied7744
2 жыл бұрын
Does this work for a 2019 Honda CRF 450L?
@rmatvmc
2 жыл бұрын
Yes, it should work for that bike.
@miguelmendoza9380
2 жыл бұрын
Would this work on a sport bike?
@rmatvmc
2 жыл бұрын
This is not designed for use with sport bikes. These are designed to fit motocross bikes 18"-20" wide measuring from the outside of the foot pegs with a foot peg height of 15"-17.5" tall.
@tylerfette6053
6 жыл бұрын
Love it
@dominiquecorneau5260
3 жыл бұрын
can we use it whit a 2018 Goldwing
@rmatvmc
3 жыл бұрын
I doubt this would work for a bike that big. Measuring from the outside of the foot pegs, this system will fit bikes 18"-20" wide with a foot peg height of 15"-17.5" tall.
@cherriebeyer9331
6 жыл бұрын
Would be nice for my CTC.
@21824
3 жыл бұрын
honestly looks like straps are easier and faster.
@Zw1d
3 жыл бұрын
i have a system almost identical to this one, and straps aren't easier or faster, unless you have a large trailer, with perfectly placed mounting points for multiple bikes and you happen to have appropriately sized good quality fast straps
@entab7912
3 жыл бұрын
Would this fit a 2021 crf250f?
@rmatvmc
3 жыл бұрын
Yes it will
@Joneszee1969
5 жыл бұрын
I have oversize foot pegs (52 mm) will the jaws accommodate them?
@rmatvmc
5 жыл бұрын
The jaws are pretty large and will work with most aftermarket foot pegs but it will vary on the exact ones you have. You can contact Risk Racing to be confident they'll work with your exact pegs. Thanks for watching!
@Curry907
7 ай бұрын
I gonna go ahead and give these 2 thumbs down! I bought my first set and I tighten the bolt that holds the footpegs to the rail you mount to the floor. Then I go to remove it and bam stripped. The metal the bolt goes through strips super easy. Now here I'am with no other option but to try and use a hammer to move the device off the track and it bends all to hell. I reach out to both RM and the company itself No one answers. I blame covid era. I like the ideal and feel maybe I tighten my first one wrong buy another set very carefully don't over tighten this set up and bam same thing again. this time I grind the bolt off and drill it out. Now I have a set that doesn't fasten to the floor the bike slide sideways and falls. Out almost $500 gave up on reaching out!!!
Пікірлер: 37