I’d like to see an extra locking system on the peg so it can’t bounce out if the suspension is compressed. All it take is once bounce of a median strip for the trailer to bounce enough to test any tied down system.
@kevinrowe3272
2 жыл бұрын
Yup. Surprised they took that away as the original version clamped from top and bottom. I am leaning towards the OG version for that reason alone.
@maverick2242
5 жыл бұрын
Nice, Im liking this option fer sure in the Toy Hauler and Sprinter. 👍
@iman80skid91
Жыл бұрын
Correct me if I'm wrong but you say it stops the pressure on your fork seals... but all it's doing is slightly compressing the springs because the oil finds equal pressure either side of the valve... meaning no pressure on the Seals at all
@micahroberts3564
Жыл бұрын
Don't waste your time or money The rubber wears out within one trip. It's made of poor strength aluminum, not long you'll see warping and it'll start to stick. If mud or dirt starts getting down into the sliding mechanism, it will seize up. It's expensive. The screw heads are to soft, and can start to pull out of floor after a few bumpy transports. E track system with wheel chalk is way better, far more secure, useful and cheaper
@comradealexie
5 жыл бұрын
this looks super cool, would be really nice to have seen it in action while you guys were driving. Is the compression from sitting on the bike enough to keep it in place while going over bumps? does the bike move around when you use this on an open trailer?
@rmatvmc
5 жыл бұрын
If you sit on the bike and compress the suspension when pushing down the jaws, it holds it down pretty dang good. I haven't pull an open trailer with one so I can't give feedback on that, but I do know that Risk Racing does a lot of testing with these in several scenarios.-Chase
@WADZUP
5 жыл бұрын
After I shared my recent experience I would of liked to of seen what happens when you move the bike back and forth to simulate movement and play in the system?!?
@ponydown418
5 жыл бұрын
I just watched your other video. Ouch.
@WADZUP
5 жыл бұрын
@@ponydown418 if you purchase I would recommend buying cycra soft straps as well for additional safety.
@ponydown418
5 жыл бұрын
@@WADZUP thanks for the tip! I'm just picking up my first toy hauler this weekend so I'm not sure what system I'm going to use just yet.
@WADZUP
5 жыл бұрын
@@ponydown418 did you watch my part 2 of the Bike binderz system?
@ponydown418
5 жыл бұрын
@@WADZUP yes I did. I liked how secure the system looked. But it looked like the chains had ti stay attached to the floor. Correct me if I'm wrong. I coukd see my kids tripping over them going out the big door in the toy hauler.
@JENX1976
5 жыл бұрын
Pretty cool set up. Looks way easier than the pitbull system. But those little screws holding down that board doesn't inspire confidence. Of course you could always install it with bigger bolts. Do they have longer boards available for wider motorcycles like sportbikes?
@rmatvmc
5 жыл бұрын
I don't believe so. These were designed for off-road bikes specifically. Thanks for watching!
@nathanbrown156
3 жыл бұрын
On the original version you mentioned the base plates were different when being mounted in a van or truck bed to account for the raised ribs. This new version now has an east/west base plate. Is there a solution for floors with ribs or do you need to come up with your own spacers?
@jessegarrett7215
5 жыл бұрын
Looks like a great way to haul a bike but does it have a way to lock the system to prevent theft? It’s not a problem in an enclosed trailer but I either use my pickup bed or a flat bed trailer, so locking up the bike is important if I want to stay overnight in a hotel or something
@rmatvmc
5 жыл бұрын
How do you lock on your bike normally? This system doesn't have any sort of theft prevention built in but you could still use a security cable or lock in it up the same way you do now I'm sure.-Chase
@micahroberts3564
Жыл бұрын
Do not, under an circumstance use this in the bed of your truck. It will rip right out of your truck bed
@TYTO972
2 жыл бұрын
Bought 2 and on each one the left jaw is unlockable... Very disappointed
@tomclifford7577
5 жыл бұрын
One thing that looks like they should have kept with the older version is the bolt down system to the floor. They have reduced the width of the foot (front to back) by at least 100%. So with the new system the bike will roll back and forth a lot more as the mount will rock more when loaded e.g. braking. I'd be inclined to strap the front or back wheel to stop this. Also, by making this suit a larger variety of footpeg heights, they've take away the lower part of the camp. Is there any chance the suspension can load more and the footrest pop out?
@marcusnilsson2463
2 жыл бұрын
50%*
@chrisvozza6530
5 жыл бұрын
Nice
@jfratis9081
2 жыл бұрын
These are great for a vehicle but do not install these on a trailer. I bought 3 sets and all were replaced due to flawed welding and design. They sent a gen 2 but these also failed. They just dont hold up. i have a pile of them. In one way or another the top rips off. The lock knobs also are really undersized and the threads are steel which you never use in aluminum due to corrosion.
@caydenthompson126
5 жыл бұрын
Hey Chase, so you just drill the baseplate into the aluminum/steel bed in a pickup truck? What if you have a bedliner? Thanks.
@rmatvmc
5 жыл бұрын
Cayden, I would ask Risk Racing directly on that. We haven't used a truck bet with a liner before so I don't have a good answer for you. Sorry.-Chase
@caydenthompson126
5 жыл бұрын
@@rmatvmc No worries, will do. Thank you.
@DirtyBob200X
Жыл бұрын
Would this work on an open trailer with a sport ATC like a ATC 250R?
@avragejoe1
Жыл бұрын
Is the safe for a open flat bed trailer? Just worried it might come loose and be on the side of the road.
@rmatvmc
Жыл бұрын
It's perfectly fine for that. Just make sure you mount the base plate securely.
@booger65man
2 ай бұрын
Can the bike compress and come out of the mounts when hitting bumps?
@rmatvmc
2 ай бұрын
When loading the bike, if you compress the suspension just a little and push the arms down it holds the bike very well.
@jmdesigns3841
2 жыл бұрын
How do these compare to bike binderz?
@GRASSMASTERZ
3 жыл бұрын
I get mine on 11-19-2020.
@georgeyarrington376
4 жыл бұрын
i have these and they freeze up in the lock position, i have to fight to get them to pop up and release, any suggestions, I'm very unsatisfied at this point.
@richardharris3672
Жыл бұрын
Does it work with side tool boxes
@rmatvmc
Жыл бұрын
Sorry, I'm not sure I understand your question. Side tool boxes on your dirt bike?
@Hardrakk187
5 жыл бұрын
Chase, it looks like your stool has a little bit of a hitch in its giddy up. Did you blow a wheel on that thing?
@rmatvmc
5 жыл бұрын
haha! Can't believe you caught that! Yeah, it's seen better day for sure. Thanks for watching!-Chase
@nathan00campbell
2 жыл бұрын
so what stops the bike from coming out of that system when the transport trailer/truck hits a hard bump, the bike suspension compresses, and it jumps out of that system. Also im looking for a system that DOES NOT compress the suspension as im needing a system for long term transport behind the cab of my semi truck.
@chrg_1_8prestazione13
2 жыл бұрын
The only way to secure a bike without ANY compression, would be to secure at the tires, using strap or wheel net. Bike will move around a bit, but will be secure.
@nigellove-lovebigbikeadven4783
Жыл бұрын
Hi guys Would this work ok Ona KTM sar1290?🙈
@weedsmith9317
5 жыл бұрын
In the back of a truck i dont see these very secure. DOT will have a hayday
@brianhaygood183
4 жыл бұрын
Outside of the basic recommendations for how many straps to use on a heavy cargo flatbed load, DoT can't really do anything about a poorly secured load unless it actually falls off the vehicle or has no attempt at tie downs at all. No idea why these would work any differently in the back of a truck vs in the back of a trailer. Clearly they require some kind of stable base, but that's up to you and how you secure it, not truck vs trailer.
@zacharyfett2491
5 жыл бұрын
Can this be used on a hitch mount?
@reubenleebrown
3 жыл бұрын
Any thoughts on a toy hauler for 5-6 trail bikes enclosed of open either one?
@jfratis9081
2 жыл бұрын
They will work great in an enclosed trailer. When they break at least your bikes wont fall out. Open no. I wound up having to strap the bikes anyways as they would keep failing.
@motoman001
5 жыл бұрын
How does it clear the shifter and brake pedals when you back the bike out?
@rmatvmc
5 жыл бұрын
Just backs out the same way it goes in. Clearance isn't an issue.-Chase
@gavinbritt1349
3 жыл бұрын
Is there any way to put a lock on these so my bikes aren’t stolen off my trailer?
@rmatvmc
3 жыл бұрын
That's a great question! There isn't a way to lock the Lock-n-Load unit, but you could always send a security cable or chain through the bike and secure that to the trailer. - Wes
@S0RELOSER
4 жыл бұрын
Do these catch on shift levers when rolling the bike in?
@rmatvmc
4 жыл бұрын
We haven't had any problems with the shift levers catching! We have another video showing Risk Racing's regular Lock-N-Load system where you can see use pushing the bike in around the shift lever. You can see that at 3:25 in this video: kzitem.info/news/bejne/oqJ9xYGprZRqlWk
@westcoastsingletrack7854
5 жыл бұрын
Can they work for ATVs since they can adjust the width
@rmatvmc
5 жыл бұрын
It wouldn't be near wide enough for an ATV even adjusted all the way out.
@Matt43
5 жыл бұрын
Awesome system but way too expensive for me
@andrewotto1800
5 жыл бұрын
I own two of the old lock & load systems and I’m not that happy with them. I love the idea and design but they’re poorly made. Both of the plastic knobs used to tighten the spring loaded locking pin cracked and broke off. Luckily I found after market aluminum ones but they still pop off and the pin comes flying out. Now I’ve lost one of the springs in both of my lock n load systems because of this. Sometimes when I hit a bump while driving my motovan they come undone but luckily they are built with an additional safety pin you can slide in which has saved my bike from falling multiple times. Looking at this new one I’m even more disappointed. Another plastic lever that will inevitably break and now there’s no safety pin to save your bike if their piece of junk fails. I’ll continue to put up with my old ones since I still prefer it over straps for the saved space but I’m definitely not buying this new version. Looks even more poorly made than the last one. I love the Risk Racjng starting gate though.
@richardli8634
3 жыл бұрын
anyone try this on a streetbike?
@scottiemanners
4 жыл бұрын
Ouch, $270. I'll do this same thing with chain or turnbuckles and caribeaners hooked to D rings.
@mobgma
5 жыл бұрын
the cost is outrageous. I have sent this off to china so i can buy on aliexpress in 3 months.
@Curry907
7 ай бұрын
I gonna go ahead and give these 2 thumbs down! I bought my first set and I tighten the bolt (The red one) that holds the footpegs to the rail you mount to the floor. Then I go to remove it and bam its stripped some how maybe all the movement of the van the threads are Stripped. The metal the bolt goes through strips super easy. Now here I'am with no other option but to try and use a hammer to move the device off the track and it bends all to hell. I reach out to both RM and the company itself No one answers. I blame covid era. I like the ideal and feel maybe I tighten my first one wrong buy another set very carefully don't over tighten this set up and bam same thing again. this time I grind the bolt off and drill it out. Now I have a set that doesn't fasten to the floor the bike slide sideways and falls. Out almost $500 gave up on reaching out!!! Ps all the little screws fall out randomly also.
@MatthewRichardsonVlogs
5 жыл бұрын
Ummmmmm yeah........I'll pass on this. Screwing into my tail bed is a no go...$280? *Grabs $30 Strap* ... Nice Video though! Love y'all RM ATV
@eirikbrun-svendsen9460
4 жыл бұрын
you want it, just admit it! :D
@upaginit
5 жыл бұрын
$300 buys a lot of straps lol
@ponydown418
5 жыл бұрын
3 hundo. Ouch that's pricey.
@maverick2242
5 жыл бұрын
Think of the seals you're saving, greenies will be pleased👻 also save on ya pressure build up.
Пікірлер: 70