You should install a sunroof, you would be able to make that gear stick a bit longer.
@hashslingingslasher4215
6 жыл бұрын
Steve Foster lol
@jonathanrivera3480
5 жыл бұрын
That was cold blood. Lmfao 😂
@nauticofettuccineravioliss4863
5 жыл бұрын
Too funny
@Billy28376
5 жыл бұрын
Lol thought the same thing
@Nostradamus_Order33
4 жыл бұрын
Someone could sit on the roof. Feet dangling into the cab, then shift for the driver. Like a boss. Copilot.
@paulbains9152
8 жыл бұрын
I put a Road Ranger in a pickup with the big truck clutch , first time pushed the clutch in it bent the dashboard .Transmission weighed as much as the truck , Ended up using an air assit clutch linkage ,have to go thru 3 gears to cross an intersection , nice to see Im not the only one who gets stupid ideas
@timgreen4137
7 жыл бұрын
Paul Bains You did it for the same reason the rest of us do stuff. "Cuz we can!!!"
@DavidHutson-pt5pe
5 жыл бұрын
The fact that the transmission has 10 gears DOES NOT mean that you MUST ALWAYS start out in the lowest gear. Even in an 18 wheeler with an empty trailer you can easily start off from a dead stop in at least 3rd or 4th. In a pickup you could probably start it off in 5th or 6th, and never harm the clutch or engine.
@fastfoodcritic4353
5 жыл бұрын
Ur a dumbass . thats why pickuos dont come with 10 speeds. Get a real truck.
@seansutherland6270
5 жыл бұрын
I'd do this for the crazy low range you'd have for offroading
@justanotheraviator2357
5 жыл бұрын
@@fastfoodcritic4353 F150s come stock with a 10 speed, Ford doesn't however have any manual option!
@HomerEscobar1
Жыл бұрын
10 years later and this still puts a smile on my face
@jeepinass
Жыл бұрын
I'll build another one of these days.
@xxxmikeyjock
Жыл бұрын
@@jeepinass more info on the transfer case adapter please?
@jeepinass
Жыл бұрын
@@xxxmikeyjock it was a one-off piece.
@xxxmikeyjock
Жыл бұрын
@@jeepinass come on man share a bit. did you cut the output splines down? did you make a spud shaft? it was probably a lot of work , brag about it some :) this video is the most 12Valve thing ever
@LeandroMuntendam
Жыл бұрын
11 years later and still puts a fuckin big smile to face. this is still awesome in 2023
@dukwcapt
5 жыл бұрын
THIS IS AWESOME. Yeah, it's a guy thing. I love inventive, creative DIY stuff like this! American ingenuity at it's best. I don't know this guy, but I wish he was my neighbor, I'd bet we'd be friends spending time building KOOL stuff in the garage! Diesel engines,High performance engines,even steam engines, did anyone see the guy that put a RADIAL AIRCRAFT engine in his vintage pickup truck? This is what Hot Rod guys, Custom car guys, bikers and bike builder guys are all about. Look how popular this stuff is now on TV! I was so disappointed to read all the negative comments below. I admire a guy that takes an old school bus and turns it into his dream motor home, or some of the wild builds you see on Leno's Garage. Negative people SUCK and are most often losers themselves, never let them put you down. Build your dream.
@1fffishy1
9 жыл бұрын
That would really throw a thief off.... lol. Awesome.
@090faller
10 жыл бұрын
That's pretty cool. I'm looking at building a dually single cab with a 18 speed in it for towing and fun at the sled pulls.
@jeepinass
12 жыл бұрын
No tach so no idea on the RPMs. It will do about 90 though, wide open. Which is a little better than the stock gearing. I swapped the 4:10 Dana 70 out in favor of a 3:54 Dana 80. And it IS a regular cab. As for the compressor, I'm using an engine driven air compressor. It's a Bendix bx2150. 9.5cfm at 1200 RPMs and fed by oil and coolant from the motor, so it's a 100% duty cycle compressor.
@dodgeman338
4 жыл бұрын
What kind of flywheel housing and parts to do the swap ??
@randyruppel6727
8 жыл бұрын
I still rewatch this video! love it man
@LeandroMuntendam
3 жыл бұрын
you're not the only one :P
@TheCrustyFatCab
10 жыл бұрын
Ha pretty cool... I'm a sucker for a twin stick setup just for the fun of struggling it a little, but this would be my second choice! Surprised how short the throw is on the shifter for it being so tall. Nice job.
@iBackshift
9 жыл бұрын
Buddy....that was entertaining. Nice smooth shifting.
@jeremybocko
9 жыл бұрын
Top shelf mate, really talented to pull this off. I noticed the classic dodge steering, if you don't have Parkinsons you can't drive a straight line. I had a 92 W250 as my first rig and I cannot drive new pickups because I'm always trying to turn the wheel to drive straight.
@KohalaIronWorksCase
8 жыл бұрын
The Roadranger is a good idea for saving the clutch offroad...I'm more partial to the Spicer Brown-Lipe set up myself. Nice set up...shifter is a little to long for my liking...
@huggyyz450
8 жыл бұрын
I'm as hard as I diamond in an ice storm right now
@BraddahsCuzin
5 жыл бұрын
Badass swap! That must have been some heavy fabrication. Badass! It's all I can say.
@robmyers2521
10 жыл бұрын
Love the turned around 10 speed, add a 13 spd splitter box and have a 15 spd double over
@jeepinass
9 жыл бұрын
If I ever build another, I'll start with an RTOO-9513.
@robmyers2521
9 жыл бұрын
Basically that is a rto 9513 that has been turned around. If you ever find one an rto6513 is physically smaller and will turn around too
@MrLavallet
7 жыл бұрын
BADASS MAN...I LOVE THE SHIFTER!!
@brosknows1297
7 жыл бұрын
that shifter has got to be the stupidest thing i have ever seen. LMFAO
@panzerfaust5119
7 жыл бұрын
Bros Knows its called old skool.Bros dont knows as much as he thought
@shaneperkins3895
7 жыл бұрын
Terry Franks no its called ugly as fuck
@FirebirdCamaro1220
7 жыл бұрын
Bros Knows At my company, a couple of our older Freightliner Centurys have this shifter in them, and it is JUST as tall in a semi as in this pickup believe it or not (meaning goes over a foot over the top of the dashboard)
@fastfoodcritic4353
6 жыл бұрын
Terry Franks Steve Foster his shifter is gay. He thinks hes driving a semi truck now since he has the transmission. He mosy likely tells people he drives a big truck becuase it has bigger tires
@fastfoodcritic4353
6 жыл бұрын
The shifter is not old school. Its plain out gay.d
@danielh4995
6 жыл бұрын
Its astonishing how many stupid people are commenting on the height of the shifter. That is the stock height for that shifter, I had the same gearbox in my dump truck, the shifters in big trucks are on the floor and the transmissions are underneath the floor not in a tunnel like a pickup. If he wants to he can cut the shifter down but it is probably easier to drive with the tall one. The fab work and engineering to get one of those gearboxes to work in a pickup is quite extensive. Seems like Jeepinass did a very nice job on the conversion
@daleolson3506
5 жыл бұрын
Could put a strobe light on top of the shifter,that way if you get stuck in a snow drift we can find you.
@jamesscherbenske5985
9 жыл бұрын
definetly a conversation piece
@Freedomfab
11 жыл бұрын
I am very interested in what it toke to adapt the 205 to the roadranger. I just bought a roadranger 9 speed for my 1st gen and was going to do a divorced 205 but after seeing your video I was wondering what it would take to convert it.
@Gonecheenin
8 жыл бұрын
Freakin cool - though I would need to cut it down so my fingers didn't get numb!
@peterjohnson7710
9 жыл бұрын
If it was me I would have made the sick shorter
@Slackerjr92
11 жыл бұрын
Sounds and shifts very smooth.
@stanleykendziorski7964
5 жыл бұрын
Other than the shifter makes me think you've seen a willy up close, not bad at all.. I'd be interested in seeing how you adapted a 205 to that transmission
@codykennedy19
3 жыл бұрын
Nice work on the video man can you do a longer one like this one only Revit up a little bit more in between shifts because that thing sounds like a beast
@mikeclay4666
Жыл бұрын
😎😎 Cool Stuff Brother...Keep it up. if you can give the fans an update on the truck when you can.
@carreonj74
8 жыл бұрын
Nice Shifter. Very good for shoulder workout....:)
@alexstilwell7640
4 жыл бұрын
I think i cam make out the song you started with on ur stereo lamb of god walk with me in hell:)
@onebadcummins7049
9 жыл бұрын
Need to cut down that shifter 3/4 of the way
@drummer15kader
8 жыл бұрын
+onebad cummins Need to fuck off i think. This guy did an awesome job with his truck. Dont like it dont watch the damn video
@foolongtea
8 жыл бұрын
+drummer15kader The shifter is a bit long. You'd look rediculous driving down the road like this, at least I'd laugh.
@Icutmetal
4 жыл бұрын
foolongtea Imagine the disappointment in seeing you laugh.
@kawscottyoung
10 жыл бұрын
Absolutely Too Cool !!
@jeepinass
9 жыл бұрын
Thanks man.
@TheBlueCollarPreacher
8 жыл бұрын
Shifting like a boss, haven't seen him using his clutch.
@mikegrazio5376
8 жыл бұрын
+The Blue Collar Preacher That's because it is a large truck transmission. Those transmissions do not have synchroed gears. The only way to shift is by double clutching or not using the clutch and floating into gear.
@keithmask9108
8 жыл бұрын
Floating is terrible on a clutch and transmission. Most people who float have no understanding of how a clutch works and are usually rookies.
@jeepinass
8 жыл бұрын
+Keith Mask You sir, are a dumbshit.
@keithmask9108
8 жыл бұрын
+jeepinass No sir, you are the dumb shit
@keithmask9108
8 жыл бұрын
+jeepinass Haha you're funny bud. I'm sorry that there is a wrong way and there is a right way to shifting and you're doing it the wrong way. Did you ever think that there was a reason they put a clutch pedal down there.
@aftisafterme9736
7 жыл бұрын
Someone couldn't pass pre trip lol pretty cool though.
@peter2973
7 жыл бұрын
He failed trucking school so he thought this would be the next best thing to do.
@fastfoodcritic4353
5 жыл бұрын
Lmfao. My guy. I say this all the time to people like this.glad to see someone else does this.
@fastfoodcritic4353
5 жыл бұрын
Wanna be truck driver who failed his road test.
@EliteOps1
9 жыл бұрын
What is the exact purpose of having such a long shaft for your shifter? Does this driver have a shoulder problem so he needs to get a little shoulder/arm stretching while driving? Or is it something deeply phallic that exists only in America? I ask because I've NEVER seen anyone have such a long stick in their car in Europe.
@billybobjoe198
9 жыл бұрын
+jeepinass WHOO WEE. GO BUCKEYES!
@whynot9899
8 жыл бұрын
+EliteOps1 It is unique. The question is not about practicality, it is a demonstration of capability.
@MustangMania2001
8 жыл бұрын
+Frank Garrett who r u and why did you tag me
@bluefire87HN
8 жыл бұрын
+EliteOps1 Extremely long shaft means extremely short dick!
@omegarugal9283
8 жыл бұрын
+EliteOps1 "What is the exact purpose of having such a long shaft for your shifter?" he is using a heavy duty trasnmission on a regular truck, that transmission is not meant to be there, it`s for a semi...
@tiggfigg2948
9 жыл бұрын
That is very bad ass, except the shifter is kinda high.
@hamsterattack1357
9 жыл бұрын
That's the point. It's something that started in big rigs years ago
@billferris5292
Жыл бұрын
Cool it's a redneck version of ratfink in real-life.
@grizzlywintergreen7868
8 жыл бұрын
that's a sick truck man
@biggrigger332
10 жыл бұрын
Ever want to play hockey, you sure got a stick for it.
@logancurry3835
7 жыл бұрын
from what i seen he floated every gear
@KevinRichards-rk3gp
Жыл бұрын
I bet that long shift stick makes you feel like you're driving a biggo semi.
@jimkillen1065
3 жыл бұрын
Pretty slick shifting also lol
@Hellyeahbrother1993
4 жыл бұрын
Have none of y’all ever been around big rigs the long shifter is pretty common it looks pretty sick
@wayneflesh2924
7 жыл бұрын
THAT SHIFTER IS CRAZY BUT ITS HIS TRUCK WHO CARES . ILL BET THAT TURNED AROUND 10 PROB HELPS GET GREAT FUEL MILAGE
@TheRamdiesel
9 жыл бұрын
and here is the new opening sequence to squidbillies
@slrn832472577
6 жыл бұрын
His truck... he can do what he wants, but if it were me I'd do some trimming on that shifter.
@kyleturnwald5064
8 жыл бұрын
My shifter is about that long and people give me shit for it and I just laugh
@jeepinass
8 жыл бұрын
exactly what I do. cheers or jeers, it's entertaining either way.
@kyleturnwald5064
8 жыл бұрын
+jeepinass Oh yeah watching people get butthurt over a long stick.
@doeboy6237
8 жыл бұрын
+jeepinass I did a swap just like this only in a Chevy with a RT6610 no overdrive, what is your transmission out of? I'm having a hell of a time finding a RTO6610 but i just cant find one anywhere. Can you please help me out!!!! I hate my non overdriven tranny!!
@edlingja1
6 жыл бұрын
I want a custom tall shifter for my sedan :) Keep the throw nice & short but have a super tall shifter :P That or a hardcore $10K sequential hahahahaha
@hashslingingslasher4215
6 жыл бұрын
Jay Edlington I seen something like this in another video. It was a Ford with a Cummins swap and a Super 10 transmission
@cottondude3914
5 жыл бұрын
Is a nice job but the shifter is kinda ridiculous lol
@jpugh3076
4 жыл бұрын
I wanna put a 10 speed in my 7.3 powerstroke just cause i hate the auto mostly and a 10 speed would cost less then the crazy prices on standard swaps these days
@kentbumgarner6798
8 жыл бұрын
Thanks for vid. Shifter is awesome btw.
@INTERNATIONAL_RDF-D
5 жыл бұрын
I love all the hate comments from people about the fucking shifter height..... the man has said flat out its the stock eaton shift stalk...... in a semi the transmission is mounted much lower from the floor of the cab than it is in comparison to a custom truck build where space is limited.... and the cab is much smaller and lower slung as well..... having a trans tunnel dropping the cab about 6 inches to a solid foot lower Where a semi has a high mounted cab with a flat floor board.... that doesnt saddle the frame rails..... so all of this together Making the factory shifter length appear to be longer than stock when in reality it is stock length...... personally i would have shortened it to about level with the top of the dash..... im not a lanky person and shorty levers usually seem to have a further throw... so i made a 6" extension for mine bringing it level with the top of the dash board I find this to be the best hight Its the most comfortable for me Its easier to find And it shifts smoother with the added leverage.... but that is what works for ME this guy may like the long shifter...... its his truck he built the fucking thing and he built it his way. The fact you asswipes have to comment your distaste about something so fucking meaningless and irrelevant to your existence says a lot about how the sniveling whinny pissed off bitches you really are........ who gives a fuck. About the shifter in SOMEONE ELSES FUCKING VEHICLE ..... the fucking thing could have prosthetic leg.... a dildo..... a fucking tennis racket for a shifter and i wouldnt care..... why because its NOT MY TRUCK So shut up and quit bitching about someone else's toys that they put time effort money and work into...... As for mr "real downshifting".... i wouldnt be so quick to brag when you rake every gear...... .... personally i will never coast in a vehicle of any kind when trying to slow down..... i let my speed drop and shift accordingly then use the brakes..... only taken out of gear when its at a full stop..... i was taught to never be out of gear while moving.... its a quick way to loose control of a vehicle....
@funshootin1
8 жыл бұрын
like ape hangers on a bike.. you get used to it and then everything else is weird feeling
@JonWeideman
6 жыл бұрын
So, not sure if you're gonna see this comment or not, but thought I'd give it a shot. I dont suppose you could upload some pics or videos of the adapter you used on that 10 speed to np205?
@dodgeman338
4 жыл бұрын
Ok so you can drive it so how the hell did you do the swap is what we need to know!
@3304jake
10 жыл бұрын
What's happens if you broke your right arm and you got that stick in top of cab
@RubberDuckTrucking
10 жыл бұрын
This is awesome, im jealous
@wailnshred
12 жыл бұрын
Nice! What engine?
@johnsheldon7716
5 жыл бұрын
Screw all the automatic driving haters this is pretty cool
@cableandchain
6 жыл бұрын
hey every body i got big stick shifter lol
@monelfunkawitz
10 жыл бұрын
I think it is pretty sweet. I'd like to see the build.
@jeepinass
9 жыл бұрын
I've got a photobucket with quite a few pics. Unfortunately, I have since sold the truck.
@focojeepr
10 жыл бұрын
I see you need to replace your steering joint, I've been driving my '91 for four years now with that same slop, I need to replace mine with a borgenson soon.
@jeepinass
9 жыл бұрын
Yeah, shortly after the video, it got a new strong shaft, NWF crossover steering, and a set of Alcans and new shocks. Made the truck a whole new animal. A WORLD of difference.
@alvie2
8 жыл бұрын
darwin award winner.
@Icutmetal
4 жыл бұрын
alvie2 Why? I think some people like you are missing the point of a build like this entirely.
@chadholland6847
7 жыл бұрын
da horse shoe pattern nice
@MerlynAStern
5 жыл бұрын
I love your conversion! But I have a question. You now have 4 or 5 extra gears. Wonderful ! And then I noticed you skipping gears. If you don't want to shift all those gears, why put 'em in. OK, full disclosure. I hate skipping gears! I even start off in low! If you don't like shifting all of 'em, just get a five speed of an automatic. I don't get it. If that was my conversion I'd be using all 10.
@humminzcumminz
10 жыл бұрын
shifter is awesome dont add to it dont cut it down check out mine
@danielserna2901
3 жыл бұрын
going to a 205 is the load blow factor for me
@jeepinass
3 жыл бұрын
That was the factory case
@ElForastero10287
6 жыл бұрын
Nothing but pure torke low gears I wonder how fast it can go
@DavidHutson-pt5pe
5 жыл бұрын
That transmission in a 250/2500 truck seems pretty pointless. The transmission is SO heavy, and the rest of the truck chassis IS NOT strong enough to enable the truck to take any real advantage of that transmission. Okay, yes, it's a cool conversion, and a cool toy, but there is also no point in leaving the shift stick that long in the pickup, other than having it as an "attention getter", the fuller transmission do not require that much leverage to make the shifts, and the long shift stick is there because it is at the most comfortable height for the driver in the trucks for which the fuller transmissions are designed. A Spicer 7 speed would make a LOT more sense in the 250/2500, AND the 350/3500's.
@jeepinass
5 жыл бұрын
Care to elaborate on how much this transmission weighs?
@nickkirkland9118
3 жыл бұрын
Can you send me a parts list please? I want to swap a rto6610 into my 6bt f700 . Mainly the clutch setup and if you done hydraulic clutch or manual
@georgenicholas9230
9 жыл бұрын
Nice! thinking bout doing pretty much the same with my recently purchased '93 W250. its got 3.73 differentials and much too much gap between 3rd and 4th etc.. Not great just bobtailing and i'm not even thinking about towing my trailer w/ bobcat the way it is now (still using my other '93 w/4.10s). Were you happy with it when all was said and done? Anything you'd do differant?
@jeepinass
9 жыл бұрын
Next time I'll have more money, and use a FSO8406. Less weight, less work, better fit, stronger. Also, I won't wrap it in such a piece of shit truck. Lol.
@Martin-xb2rz
Жыл бұрын
The roadranger has a torque converter right?
@jeepinass
Жыл бұрын
No
@AllNightTNT
6 жыл бұрын
I have a cumming 12 valve in my school bus. I want to swap out the Allison auto for a road ranger 10 speed. can you give me any advice on what exactly I need? please help, cause my Allison is about to take a shit and I need to swap something in asap. but I'm sick of the auto. thanks in advanced!
@gunsmoke6463
7 жыл бұрын
Why the hell would you want a shifter 10" from the roof of the truck for that's a little overboard...
@TheMonstar305
10 жыл бұрын
How is low first gear and low 4wd?
@jeepinass
9 жыл бұрын
7.17:1 and 1.96 to one respectively. Which equates to stupid low. Even in 2wheel high, first gear nearly useless. By the time the clutch is all the way out, it's ready to go to the next gear. I always started in 4th.
@srbontrager
9 жыл бұрын
jeepinass so this does have 4wd. Me and my brother got into an argument with me saying 4wd is possible he says not.
@srbontrager
9 жыл бұрын
jeepinass also I have been wanting to do this so bad I can taste it. I want a manual but having to clutch to shift would suck. I'm used to floatin gears as I have been driving semi for a little over 3 years now. I couldn't stand having to clutch to shift again.
@jeepinass
9 жыл бұрын
Indianahick87 oh yes. It's definitely 4wd. I designed and fabbed a one-off tailhousing and drive coupler, in order to utilize the factory transfer case configuration.
@jeepinass
9 жыл бұрын
Indianahick87 haha! Yeah I feel ya man. After driving this truck for a couple years, you certainly get spoiled. Sucks having to go back to a trans with synchros. They just get in the way.
@ryandunne7558
8 жыл бұрын
Why do you keep Angel gearing the box and letting it roll ? That's a bad habit
@willbillycharles1339
10 жыл бұрын
How did you make the bell housing fit the motor because I've looked at doing it but couldn't figure out how ti
@jeepinass
9 жыл бұрын
That was the easiest part. All off the shelf, over the counter parts that bolted together just like factory.
@snopro440mod5
7 жыл бұрын
+jeepinass how did you make the transfercase adapter?
@steelcity3474
7 жыл бұрын
All you need now is a headset and fingerless gloves.
@bluebird5100
5 жыл бұрын
Sounds nice!
@chrislyon9856
4 жыл бұрын
Where did u get the bell housing
@jeepinass
4 жыл бұрын
Ebay
@JP-pl9mv
7 жыл бұрын
Has to be a Canadian, I need a hat like that so I can scare away all the women
@redneckillinois2030
4 жыл бұрын
Legendary
@allanherrera9549
6 жыл бұрын
How You put air in the lines air for the spliter
@galpinspeedshop2591
9 жыл бұрын
Need to preselect on the range shift, not hit the range when you come to neutral or your synchro won't last long
@jeepinass
9 жыл бұрын
It still has an interlock that prevents the range shift, until you leave the gate. I always hit the selector so fast coming out of the gate, that the timing for the actual range shift itself was exactly the same as if I had preselected. I tried both ways, plenty. As stated in another comment, occasionally, with the preselect, the range box would hang up between high and low, causing me to grind like Hell hitting sixth. I then had to move the shifter back to neutral, select low range, then back into high range, and try to rev match gears. A total pain in the ass, causing way more damage than this myth of preselecting. So, I always shifted just like in the video. Three years of DD duty and this trans was flawless in operation. Also, I have confirmed with several old timer truckers, that it was often placarded that it was NOT necessary to pre-select. This being, of course, back in the 80's when this trans would have been in service.
@wilmerchicas4812
6 жыл бұрын
Where did you get it done?
@bbarannik
8 жыл бұрын
I legitimately thought this was a joke at first. SMH.
@michaelgoodwin1801
9 жыл бұрын
nice floating
@hotshoter2
7 жыл бұрын
Why can't you guys tell what you used to do it what trans,what bell housing ,what adapters, ecetra it would help other guys to be able to do some of the same without a lot of wrong parts
@pete5137
6 жыл бұрын
Joseph Williams scroll up about 4 comments....somebody else asked and he listed everything
@pete5137
6 жыл бұрын
Joseph Williams .....scroll up 6 !
@masonmcleod8619
8 жыл бұрын
did u run a divorced ford np205 ?? or is this a 2wd truck ?
@jeepinass
8 жыл бұрын
As the description indicates, it is married with a one-off tailhousing designed and manufactured by me.
@masonmcleod8619
8 жыл бұрын
+jeepinass ok didn't see description would u make it sell another one ? my getrag is about to go and I can get a rto15613 for 300 bucks with a clutch just wondering if its a feasable swap or should I just go nv4500
@bryanwilson2629
8 жыл бұрын
if u wanna drive a fuckin big truck go do it
@robertol.rosasd.1704
3 жыл бұрын
What fuller transmition do you have?
@jeepinass
Жыл бұрын
It was a RTO6610
@502MS
10 жыл бұрын
That was for +novachevyguy
@reax2237
9 жыл бұрын
Awesome
@fishwilldominate
10 жыл бұрын
What the rear gear ration /top speed with that setup?
@jeepinass
9 жыл бұрын
.80 overdrive with a 3:54 diff ratio. The drivetrain will carry the truck faster than most sane people would want to drive one of these old rattly, non steering, no suspension having shoe box on wheels.
@mrceleb2006
7 жыл бұрын
Cummins Turbo Diesel, eh?
@kylemyers7457
5 жыл бұрын
That's awesome dude totally get it lol
@rockdawg1467
9 жыл бұрын
I think the shifter is coolio how the hell will that trans mate you to that engine plus that trans is bigger than stock trans but i guess there a will there's a way but again nice job
@jeepinass
9 жыл бұрын
Mating it to the engine was the easy part. Lots of trans tunneloplasty made it fit.
@jeepinass
9 жыл бұрын
Mating it to the engine was the easy part. Lots of trans tunneloplasty made it fit.
Пікірлер: 363