Glad it’s winter and your working on the bambi again I love your channel but this restoration is my favorite part can’t wait till it’s done
@NewJerseyOutdoorAdventures
3 жыл бұрын
I enjoy it
@tinynolamike6360
3 жыл бұрын
I also never heard of "spin welding" - that is super cool.😎 Thanks for the excellent tutorial.
@NewJerseyOutdoorAdventures
3 жыл бұрын
Happy to help!
@scottthejeepguy7499
3 жыл бұрын
Cool stuff, thanks patrick
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you very much
@skapunkoialternativeliving6522
3 жыл бұрын
Great video my friend those tanks where do you buy them some from I like that this way I can make my own holes put that time under my van or my camper trailer when it's built.. DIY I might add..
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thanks for checking in.
@macmurfy2jka
3 жыл бұрын
Great info! Thanks.
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you 🙏🏼
@jukie3737
10 ай бұрын
Where did you find affordable spin weld bits? I wanted to do this but for my four bits it was going to be $900.00. I have to either buy or build a tank next spring for my project.
@NewJerseyOutdoorAdventures
10 ай бұрын
I borrowed them
@kenterline64
Жыл бұрын
Thanks for the Video! Getting the 1/2" inch shank router will be easy. But where do you get your spinning bits for the plastic parts you want to weld? Thanks!
@NewJerseyOutdoorAdventures
Жыл бұрын
They are sold on Vintage Trailer Supply
@sinfonianbarelytone9191
3 жыл бұрын
Amazing! You make it look so easy. Having the right tools sure helps. Thanks. You make DIY possible!
@NewJerseyOutdoorAdventures
3 жыл бұрын
Glad it was helpful!
@thejackofalltravels8267
3 жыл бұрын
Wow I’ve never heard of spin welding before but I’ve seen a lot of holding tanks in my day now I’m gonna have to watch the other 18 videos on this restoration nice job Patrick
@NewJerseyOutdoorAdventures
3 жыл бұрын
Right on
@krazed0451
2 жыл бұрын
Check out friction stir welding, this technique is even used on metals ;-)
@Engineering_Science
Жыл бұрын
10:09 - Is spin welding melting the fitting and also the tank or just only the fitting which simply shapes and forms onto the tank? 10:10 - Whoa only 2 secs... Something tells me this doesn't chemically fuse both the fitting and the tank together to bond at the molecular level, its only melting the fitting onto the tank. Maybe applying an additional solvent cement would guarantee that both parts chemically fuses.
@bobt1931
4 ай бұрын
Thanks for the video. You wouldn’t happen to know of anyone in the New England area that can do this, I only need one fitting installed.
@gkeith4120
3 жыл бұрын
Doing a little research I guesstimate that fittings and tools for that job was over $500, plus the tank….. open a business to recoup your costs.
@markjung2766
3 жыл бұрын
Aren't you worried about having inhaled all of that airborne, molten plastic? I would advise viewers to at least try this outdoors. Definitely not in a basement.
@j1st633
3 жыл бұрын
One word: Impressive.
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thanks much.
@skapunkoialternativeliving6522
3 жыл бұрын
I love those tanks that you have you can let you seven different sizes different shapes I like that and then you just basically makes you all make your own holes depending on the way you want to put your tank.. I like that now that's DIY..
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you for the support.
@dracolyth
3 жыл бұрын
Please listen to this Patrick, I'm not trying to be rude, but helpful. That fitting WILL leak, the fitting needs to be flush with the tank. You didn't let it melt nearly enough.
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you chuck. I am cutting the bottom fitting off and doing it again.
@dracolyth
3 жыл бұрын
@@NewJerseyOutdoorAdventures i work for a airstream restoration company, when I first started spin welding, I was terrified of burning through. All of my fittings looked like this and leaked. You'll learn to trust going longer.
@brycecastleton5863
5 ай бұрын
Can you use that ryobi battery router with a similar bit? Or does it not spin at the RPM required for spin welding?
@NewJerseyOutdoorAdventures
5 ай бұрын
I will burn it out. There’s not enough horsepower.
@michaelscarfi3196
3 жыл бұрын
I had a black tank in my interstate and now with my own build I used an airhead because dealing with a tank and toilet in north jersey in the winter was a headache. I know you have a lot of experience and I’m curious why you went this route. I really love the airhead and don’t see any negatives yet.
@NewJerseyOutdoorAdventures
3 жыл бұрын
I wanted to keep this traditional
@mitchellbarnow1709
2 жыл бұрын
That was really fascinating! I had no idea that's how you melted two fittings together, besides the glue that a "weld" in it's name.
@NewJerseyOutdoorAdventures
2 жыл бұрын
Glad it was helpful!
@ChrisCXK
3 жыл бұрын
Random comment: I used to say you reminded me of Harland Williams. But now that Tom Green is into van lifing, you could pull off a Tom Green look if you grow a huge beard, long hair and jump in one of your camper vans! haha. I'm not sure who would intentionally set out to be mistaken for Tom Green though.
@travelboxcamper
3 жыл бұрын
Great video! Thank you from TravelBOX!!
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thanks for watching!
@codyschwoch5451
Жыл бұрын
Because freshwater tanks do not have any connections usually unless you specially order them like that as black water tanks already have the Waste gate pipe attached to the end not the bottom
@NewJerseyOutdoorAdventures
Жыл бұрын
That is not correct however it may vary from supplier to supplier
@kabot4878
3 жыл бұрын
I not only enjoyed the video, I also learned something new or did I learn something and that made the video even more enjoyable? Thanks
@NewJerseyOutdoorAdventures
3 жыл бұрын
Glad you enjoyed it!
@johnmhall501
2 жыл бұрын
Good new to me information. TOO much talking this video should have been 5 min max.
@NewJerseyOutdoorAdventures
2 жыл бұрын
Okay noted for next time
@codyschwoch5451
Жыл бұрын
And I don’t know if you know this, my guy, but you are using a freshwater tank as a black tank
@NewJerseyOutdoorAdventures
Жыл бұрын
My guy, this is a black waste tank it was ordered and sold that way from Vintage trailer supply
@freedomdove
3 жыл бұрын
You're a good teacher, Patrick. My handle is Dove with an "O", btw. Not Dave. 😉
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you Dove 🕊
@freedomdove
3 жыл бұрын
🙂
@grahamhood54
3 жыл бұрын
Hey we have been doing alot of spin welding lately at work but we are having issues with burning out our router what model is your Dewalt router? Your video is great by the way!
@NewJerseyOutdoorAdventures
3 жыл бұрын
I burnt mine out too. Need something more powerful
@grahamhood54
3 жыл бұрын
We talked to a guy and he says he modified a 9" grinder to fit the spin fittings and it works awesome and doesn't burn out
@allenbell3734
3 жыл бұрын
very interesting. how many days did this take to do all that?
@NewJerseyOutdoorAdventures
3 жыл бұрын
It was about an hour
@alvisjenkins1305
Жыл бұрын
Why the smoke on the one fitting ?
@enub1
2 жыл бұрын
6:00 minutes before anything useful was said. Quit watching
@NewJerseyOutdoorAdventures
2 жыл бұрын
Okay 👍🏽
@downtnchatt9286
3 жыл бұрын
Thanks for showing that, very interesting.
@NewJerseyOutdoorAdventures
3 жыл бұрын
You are welcome
@electricamir248
2 жыл бұрын
Thanks for taking the time to make the video.
@NewJerseyOutdoorAdventures
2 жыл бұрын
I’m glad you enjoyed it
@k-dramagoodmorningseoul
3 жыл бұрын
From yesterday, December, winter began. ~ A new week/month- Always wish you good health and good things together. ^O^
@KoiAquaponics
Жыл бұрын
Can you spin weld on a curve cylinder tank or only flat tanks?
@NewJerseyOutdoorAdventures
Жыл бұрын
I only know about flat tanks working
@rgknowlton1
3 жыл бұрын
I'm interested, but are each one of those spin weld bits actually $80 to $130 apiece?
@Will-bp2yc
3 жыл бұрын
Hey Patrick, where do you get the fitting(the one that goes to the router) for the spinweld fitting?
@NewJerseyOutdoorAdventures
3 жыл бұрын
From vintage trailer supply
@Will-bp2yc
3 жыл бұрын
@@NewJerseyOutdoorAdventures Thanks, found it on Amazon, wow $$$.$$
@Will-bp2yc
3 жыл бұрын
@@NewJerseyOutdoorAdventures Thank you, Vintage is half the price of Amazon.
@pepelapiu2004
3 жыл бұрын
Thanx for the informative vid. I wish there was a shop that would install those spin weld fittings. I can't see spending so much on tools for a few fittings.
@gerger7287
3 жыл бұрын
Educational, we need education on how to manage a workshop like yours, it is very organized.
@gormanthomas8135
Жыл бұрын
The 80s called....they want their safety goggles back 🤣
@NewJerseyOutdoorAdventures
Жыл бұрын
True.
@gormanthomas8135
Жыл бұрын
@@NewJerseyOutdoorAdventures Nice video. You taught me what I hoped to know by viewing. Sorry I couldn’t resist the comment about the goggles. Had the exact same ones in high school chemistry class.
@jordy4196
3 жыл бұрын
I really enjoy the renovation series! Thanks for the great content! Can’t wait to see more.
@NewJerseyOutdoorAdventures
3 жыл бұрын
More to come!
@jdawz2816
2 жыл бұрын
Your tank size is very inadequate.... 11gallons for a black/gray tank? Your not going to be happy. Design it and put in at the very least a 20 to 25 gallon tank
@paulschimel3572
3 жыл бұрын
Pretty slick! Thanks.
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you too!
@christine0081
3 жыл бұрын
Hello, thanks for the video. Could you please let me know where I can buy those fitting, specially the proud fitting 2''. I've been looking everywhere and can't find it. Thanks
@NewJerseyOutdoorAdventures
3 жыл бұрын
Check out www.vintagetrailersupply.com
@maryjonorum107
3 жыл бұрын
Patrick, you are a great teacher, who can do SO much. You are very thorough too. Thank you for this channel.
@BobbyJett1
3 жыл бұрын
Very cool. Thanks.
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you very much
@jacquotlake5461
2 жыл бұрын
Patrick, thanks for the informative video, most helpful. Do you have any sources for the individual fittings, specifically threaded, 1.5"? Thank you.
@NewJerseyOutdoorAdventures
2 жыл бұрын
it was nice chatting with you earlier.
@snail2171
2 жыл бұрын
Thank you for detailed how to video.
@NewJerseyOutdoorAdventures
2 жыл бұрын
Glad it was helpful!
@Skips1964
3 жыл бұрын
VERY helpful!! Thanks for posting this!!!
@chasetoedter9185
3 жыл бұрын
Where did you get that router machine to use for the spin welding?
@kellycj31419
3 жыл бұрын
Great video. I just pulled my freshwater tank out. The supply line to the pump broke off. So I want to ask you about your the friction spinner router. Where do you find one of those? And all the different fittings you have are kind of expensive from what I just looked at. My tank sensor screws did not come out all the way there just like spinning inside there. What do you suggest the fix is on that?
@NewJerseyOutdoorAdventures
3 жыл бұрын
The fittings and bits can be purchased on Vintage Trailer Supply and it’s a regular router with enough HP
@livinglifemyway7349
Жыл бұрын
Great info on spin welding. I was always under the impression you could not mix the black and grey in the same tank....
@NewJerseyOutdoorAdventures
Жыл бұрын
You can mix but is has to be labeled
@bellevue260
3 жыл бұрын
Looks like fun!
@NewJerseyOutdoorAdventures
3 жыл бұрын
It was actually. The molten plastic did burn a bit
@set921
3 жыл бұрын
The outside of your airstream is looking great. Hope to see more videos in the future as you start work on the interior.
@PeterHartman1
3 жыл бұрын
I used the same tank in the 66.
@glenanders5267
3 жыл бұрын
Thanks for the video. Can you do a video on your axle change? I have a 61 Bambi also and would like a modern axle.
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you Glen, the axle work is not complete. Was not around to get the video done unfortunately.
@rahulsaini2095
3 жыл бұрын
Thank you ❤️👍👍👍
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you very much.
@matthew-jy5jp
3 жыл бұрын
Great video Patrick. Very interesting. Always wondered how these units were plumbed in
@NewJerseyOutdoorAdventures
3 жыл бұрын
You and me both!
@terridiamond7862
3 жыл бұрын
I love it.
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you.
@jeanwest1058
3 жыл бұрын
1961!!!!That’s older than me!!! Wow, impressive
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thanks for checking in.
@ragtie6177
3 жыл бұрын
Excellent demonstration. Well done
@lilycanelo1337
3 жыл бұрын
Excellent work!!! thanks for sharing...🤗💗
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you! Cheers!
@matthew-jy5jp
3 жыл бұрын
I wonder why they don't use those fittings on like fiberglass 🚿 units in houses. Seems like it would be a good idea to not have to use the primer and the glue.
@NewJerseyOutdoorAdventures
3 жыл бұрын
Good question.
@michaelscarfi3196
3 жыл бұрын
Fiberglass won’t melt like that.
@Lewielou
3 жыл бұрын
That's so great. Where did you get those fittings and tools?
@NewJerseyOutdoorAdventures
3 жыл бұрын
I borrowed the fittings and purchased the tools.
@nicmert
3 жыл бұрын
Awesome! Very informative. Thanks!
@NewJerseyOutdoorAdventures
3 жыл бұрын
Glad it was helpful!
@katesease370
3 жыл бұрын
I am doing a remodel on my 1996 b190 airstream and would like to ask you some questions about your shower and solar. Is there a way to contact you?
@NewJerseyOutdoorAdventures
3 жыл бұрын
The best way to contact would be through the B190 group on Facebook
@katesease370
3 жыл бұрын
@@NewJerseyOutdoorAdventures thanks so much. I just sent a join request to a few sites. I love your megaairstream. Mine is also 4x4. Super excited to get her up and traveling.
@NewJerseyOutdoorAdventures
3 жыл бұрын
Oh really nice 👍🏽
@FearlessJacey
3 жыл бұрын
That workshop looks like a dream!
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you. I love it there.
@tmeryhewjsf35
3 жыл бұрын
Solid video, thank you!
@NewJerseyOutdoorAdventures
3 жыл бұрын
Thank you very much.
@butwereallsombdyspecial
3 жыл бұрын
How fun- I wanna do it !
@NewJerseyOutdoorAdventures
3 жыл бұрын
Worth a try.
@corydriver7634
3 жыл бұрын
That’s the strangest way of attaching a plastic fitting I’ve ever seen. The entire time you were explaining the the process I kept thinking, He’s just messing with us. 😂
@NewJerseyOutdoorAdventures
3 жыл бұрын
No jokes on this channel
@Westcoastgs
3 жыл бұрын
I would never attempt this but wow thank you for the great video, what an awesome rebuild on trailer, happy Thanksgiving
Пікірлер: 132