have the 2008 trimmer so I tried using the 2 blade as recommended in vid. Snapped in easily and made sure in correctly. 10 seconds later blades were broken off. Junk. Doesnt matter what this guy says. Mine has always given me problems regardless of all the U tubes and trouble shooting I use. Im glade you guys like yours but mine is junk and I moved on too a much better unit.
@carolyndee4565
Жыл бұрын
This is a great video! It has helped me out with the information and tips
@mariob.8669
Жыл бұрын
Good video...learned something new!
@petechumly985
10 күн бұрын
when i do the bump, cord wont come out and i have to dismantle it all the time and untangle it , what can i di to fix that
@stevehiner7392
Жыл бұрын
I have an Ryobi trimmer and the guard came preset but I get pelted with debris every time I use it. Wonder if there is a bigger guard available or if I can adjust it so I don’t get hit every time I trim? My Toro gas trimmer was much better in terms of protection.
@ShabbirHussain-rv4lr
Жыл бұрын
Absolutely love it.. does my edging in no time and i have a corner house. I have one question though.. can i remove the bump head cover off ? It blocks my view ?
@Chichimomma
Жыл бұрын
I’ve seen some lawn channels that DO remove it so they can, like you said, see better. Just wear protective glasses and long pants so you don’t get hurt if debris flies up and hits you.
@muttgee
Жыл бұрын
How do you get line out that's stick inside a bump feed? Cannot feed new line in
@andrewruneckles4977
Жыл бұрын
My guard only fits at one point so I can't move it around. I nearly always get hit in the face by debris, is this because I am using it wrong? I have a petrol whipper snipper that I can add other attachements too.
@brandon_leeroy135
Жыл бұрын
I have the 40v HP and the blade keeps hitting the guard. It doesn’t seem adjustable. Idk what to do.
@runamuckretreatmccarthy1554
Жыл бұрын
You know what the problem is with the Expnd it trimmer attachment? It turns the wrong way. May be fine for trimming, but the only way it adjusts for edging makes it throw the trimming back at you. This needs redesigned to allow the trimmer to be turned in the opposite direction for edging, so the trimmings will be thrown clear.
@DerekWiedenheft
Жыл бұрын
one side of my line keeps going back inside. anyway to fix that?
@oli_mma
2 жыл бұрын
How do I disable the auto feed “feature”? Aka auto feed “flaw”
@jspenny
Жыл бұрын
I saw another video just now that I am going to try next time: On the spool feed the line out about 30cm attach it to one of the little hook holes, the same hole that the line is hooked up to a new spool.
@jspenny
Жыл бұрын
I still don't like the Autofeed. I often turn release the trigger while moving to a new spot and end up using a lot of the line. Do they expect us to constantly hold down the trigger even while walking around the yard?
@sandrinakeffufal6008
Жыл бұрын
I discovered that you can disable the auto feed by putting a short stick in to prevent the spring moving, though it does mean you need to manually feed out the line repeatedly while working...
@jspenny
Жыл бұрын
@@sandrinakeffufal6008 I have heard about these hacks. It is ridiculous to need them. The first time I did my yard work the spool was chewed up in 30 minutes. Why should I have to fix a design flaw to use the machine?
@sandrinakeffufal6008
Жыл бұрын
@@jspenny yes you are right but jeez better than using up the spool faster than the battery lol
@SeargentBarnes
Жыл бұрын
Mine didn't even come with a guard? Brand new in the box.
@mgabrell4199
2 жыл бұрын
My Ryobi 40022 is continually feeding and I'm not pressing/depressing to make it feed. It feeds automatically causing the line to go out so much and wrap around the head ... Any ideas what might be wrong?
@ronpowers2947
2 жыл бұрын
Did you ever figure your problem out? I am having the same issue.
@timliebrockpuzzles
2 жыл бұрын
Same here
@mgabrell4199
2 жыл бұрын
@@ronpowers2947 not yet. Reached out to the company and they were no help.
@timliebrockpuzzles
Жыл бұрын
@@mgabrell4199 pull the feeder head out and then pop out the little gray piece underneath. Once you get that out, pop all of the little weights out and then super glue the piece back in place. You'll have to manually feed the string out from now on, but it's better than having it wrap around the head
@hs5764
Жыл бұрын
Why does it run then stop? The battery is fully charged. Its a brand new trimmer.
@nbuck4616
Жыл бұрын
Did you end up figuring out what was causing your trimmer to run and then stop repeatedly with a fully charged battery?
@APOLOXXVI
Жыл бұрын
Same problem
@NoChannelChannel
Жыл бұрын
You're so bad at stating compatible head/spool assembly replacement part , what head is compatible with olt1833bl trimmer ? RAC1207 looks compatible and you have NOT listed on website or packaging, but on this video title it seems compatible, total contusion
@richardhutchinson7741
Жыл бұрын
This video does not troubleshoot like it says
@sarahbutler4863
Жыл бұрын
Not starting
@Fomites
Жыл бұрын
I have a Ryobi RLT36 (made in 2013) and the shaft has a join just below the handle for the left hand (or for the hand not on the power lever) which is off-white in colour - sometimes this becomes loose. There is an electrical join within this and the electrical join can be disrupted if not screwed together firmly. This has happened several times to me. Just tighten it up by twisting/screwing it back together. I find fixes this problem. However, the problem with *my* unit is that is will not issue line automatically (and my RLT36 is designed to be an automatic feed). I have owned it since 2013 and the feed has never worked properly. Disappointing.
@coryscott839
9 ай бұрын
The auto feed robbery
@michellemoore5050
Ай бұрын
Your manuals are very confusing. Please do a video installing the guard. How can you say its the very most important part of the trimmer and not show how to freaking put it on? This is a waste of time. Meanwhile many people are returning this POS because its not working at least we dont know why!
@aussieprepper92
5 ай бұрын
Absolutely useless video. No trouble shooting was done at all.
@Markboyy1984
Жыл бұрын
Dude u gotta wear some earmuffs for a noisy job like that, trust me I know what I’m talking about. Thank me later
Пікірлер: 38