gracias por el aporte, me sirvió mucho, decir que con la placa rd6445/G y lightburn se activaba siempre la alarma y el laser a la hora de hacer el corte o el gravado entraba en pausa, falta de flujo de agua 1 yo entre a la configuración de ruida en la maquina laser y desactive ese parámetro, ya no se coloca en modo faya y funciona bien.
@newone123ish
2 жыл бұрын
Thanks for such a clear video!
@loyal365
Жыл бұрын
What would be your advice to winterize this chiller my laser is in my garage so in the winter it gets cold what can i do to keep the temp warmer for the winter
@sunfm
2 жыл бұрын
brilliant simple video, I just set mine up perfectly with this video. Thank you !!!
@jodiehand7817
Жыл бұрын
Thank you for a straight forward clear instruction on how to set temperatures on the chiller. Very helpful!
@samo5260
2 жыл бұрын
G'day. Great video. Easy to follow! Can you tell me the approximate limit I can run my water temp at, before it effects the tube adversely. Thanks!
@ceasar3251
2 жыл бұрын
Just wanted to say you've helped me out alot with getting started with my lasercutter, just wanted to thank you for all the help i got from your videos! Keep it up :)
@sharzanco
3 жыл бұрын
Hi How I can know my listen head Type is it C type or E type please advise
@fishball331
4 жыл бұрын
Hi thanks for the clear explanations! I have a 130 watt reci w6 tube. What temperature do you recommend the settings to be? I live in Southern California in US. Temperatures averages around 80 degrees fahrenheit but summer can hit 100 degrees Fahrenheit Thanks in advance
@lavonnerogers3588
4 жыл бұрын
Hi there, really beginner question, do you tune in the laser machine before you turn on the chiller for the first time? Can you tell me the series of steps to turn it on? I don’t mean hooking it up I think I have that
@glendaneaton1585
2 жыл бұрын
Hi Matt, where is the link to the English version of the instructions?
@CloudrayLaser
2 жыл бұрын
Please contact Cloudray official.
@markmaciak5044
3 жыл бұрын
Is the alarm outlet not necessary?
@billdanic9955
3 жыл бұрын
Thank you for this!
@maurosegurah
3 жыл бұрын
Thanks!!!!
@marcwolf60
2 жыл бұрын
Hi and thank you so much for this. I live in Far North Queensland where then temps are in the 28-32C. So glad to see them in an environment like my own. Q. How long do they take to bring the temp down to 18C. Also do you leave yours running all of the time. I have brought 2.. one for my own set up and the other for a local community laser. I am very worried that the people there will not wait until the temp is down to 18C before trying to use the laser.
@CloudrayLaser
2 жыл бұрын
Under normal circumstances, you need to run the chiller for a few minutes to ensure that the laser tube is completely filled with water. The digital display tube will display the real-time water temperature, and you can decide whether to start working according to the water temperature. Do not stop running the chiller during the laser tube work. After the work is completed, you need to pause the laser tube for two minutes and then turn off the chiller to ensure the safety of the laser tube.
@marcwolf60
2 жыл бұрын
@@CloudrayLaser is there a formula I can use to estimate the time needed to go from say 32C ambient down to 18C and calculate the approx time.
@CloudrayLaser
2 жыл бұрын
@@marcwolf60 Due to different environments, there is no reasonable formula to calculate the cooling time. However, you can enter the advanced settings of the system to set the alarm for high water temperature and low water temperature. The operation method is described in the instruction manual.
@rmlaservacucu3d189
4 жыл бұрын
When you can make a video for my laser? My laser have a camera, use the USA software
Пікірлер: 22